Kampinis šlifuoklis Dnipro-M GL-160SE 1600 W 125 mm su greičio reguliavimu

Trumpai apie prekę

Prekė: Kampinis šlifuoklis Dnipro-M GL-160SE 1600 W 125 mm su greičio reguliavimu. Kategorija: Kampiniai šlifuokliai.

• Gamintojas: Dnipro-M
• Modelis: 19419000
• Įtampa: 230 V

Angle grinder Dnipro-M GL-160SE

Dnipro-M GL-160SE is a network angle grinder for cutting, grinding and cleaning metal, concrete, brick, stone, granite, marble and other building materials.

The model works with the disc 150 mm, has a maximum power of 1600 W, rotation adjustment 5500 to 10500 rpm /min and the Constant Power system, which helps maintain performance under higher load. Thanks to this, the grinder will work well for cutting, cleaning welds, metalworking and renovation works.

The set includes a GL-160SE grinder with flange, nut and protective cover, additional handle, disc replacement wrench, graphite brush set, user manual and packaging.

Why choose Dnipro-M GL-160SE?

✓ Maximum power 1600 W for cutting and grinding demanding materials

✓ The 150 mm disc gives a greater operating range than the standard 125 mm

✓ Regulation 5500 to 10500 rpm /min allows you to adjust the rotation to the material

✓ Constant Power helps keep performance under load

✓ Soft Start reduces jerking during startup

✓ M14 thread and 22,23 mm hole fit popular fixture

✓ 3 m cable gives a more comfortable working range

✓ The brush set included facilitates the subsequent operation of the tool

Technical data

• Model: GL-160SE
• Type: Angle Grinder
• Power Supply: Mains
• Voltage: 230 V
• Frequency: 50 Hz
• Rated Power: 1100 W according to instructions
• Maximum power: 1600 W
• Rotation speed: 5500 – 10500 rpm /min
• Disc diameter: 150 mm
• Disc hole diameter: 22,23 mm
• Spindle Thread: M14
• Spindle length: 18,5 mm
• Rotation adjustment: yes
• Smooth start: yes
• Remaining rotation / Constant Power: yes
• Protection against accidental start-up: not according to instructions
• Cable length: 3 m
• Degree of protection: IP20
• Protection Class: II
• Working weight: 2,5 kg according to the instructions / 2,6 kg in the Allegro catalogue

Functions: cutting, grinding, surface cleaning, rotation adjustment, smooth start, sustaining rotation under load, spindle lock, working with a 150 mm disc, working with a side handle.

Set: angle grinder Dnipro-M GL-160SE with flange, nut and protective cover, additional handle, disc replacement wrench, additional set of graphite brushes, user manual, packaging.

Rotation adjustment and working with different materials

GL-160SE has a speed control, so you can adjust the work of the grinder to the material, type of disc and task at hand. This increases control over the tool when cutting, grinding, deburring, chamfering and cleaning surfaces.

Positions 1 to 3 are designed for lighter jobs such as deburring, chamfering and fine material processing when you do not need to press the tool firmly. m.in will check out. when working with plastics.

Position 4 will work well when grinding very delicate materials, such as soft wood, where greater control and less risk of damage to the surface are important.

Item 5 is suitable for machining materials with medium resistance to damage and deformation, such as hard wood and metal.

Item 6 is designed for cutting, cleaning and polishing materials resistant to deformation under the influence of temperature, such as metal, concrete, brick, granite, stone and marble.

Constant Power helps maintain performance under load, which is especially important when cutting metal, grinding welds and working with building materials.

Soft Start, design and comfort of work

Soft Start reduces the sudden after startup. This makes it easier to start cutting or grinding and more reliable to drive the tool from the first seconds of work.

The 150 mm disc allows you to work deeper than small 125 mm grinders, while the tool remains more handy than large 180 mm and 230 mm models.

Additional side handle improves control over the grinder during cutting and grinding. The rubberized 3 m cable makes it easy to work at the station without constantly rearranging the extension cord.

Dustproof bearings, varnished winding and reinforced motor protection increase the tool's resistance when working with metal, stone and concrete.

Application

Angle grinder Dnipro-M GL-160SE is suitable for:

• cutting of bars, pipes, profiles, angles and sheet metal;
• grinding and cleaning of welds;
• removing rust, paint and old coatings;
• cutting concrete, brick, stone, granite, marble and ceramics with a suitable disc;
• treatment of building materials;
• grinding metal and wood with appropriate accessories;
• renovation, assembly, workshop and installation works;
• tasks requiring rotation adjustment and maintaining performance under load.

You buy in the official store of the manufacturer Dnipro-M - you can be sure of the original product, consistent with the manufacturer's data and intended for real work.

Specifications