Kampinis šlifuoklis 125 mm 950W belaidis, bešepetėlinis, 2x4,0Ah 21V

Trumpai apie prekę

Prekė: Kampinis šlifuoklis 125 mm 950W belaidis, bešepetėlinis, 2x4,0Ah 21V. Kategorija: Kampiniai šlifuokliai.

• Gamintojas: Geko
• Modelis: G80680
• Įtampa: 21 V

Brushless Cordless Angle Grinder 125mm 950W 2x4.0Ah 21V (5)

Brushless Cordless Angle Grinder 125mm 950W 2x4.0Ah 21V

The battery angle grinder has been designed for intensive work in the workshop, on the construction site and during renovations, what characterizes it the most is mobility and full control over each cut.

Efficient brushless motor with 950 W power, 21 V power supply and two 4.0 Ah batteries ensure high efficiency and full freedom of operation without power cord restrictions.

The device works with discs with a diameter of 125 mm and is equipped with a 3-degree speed adjustmenti (3000 / 5000 / 8000 rpm. /min), slow start function, switch with continuous operation lock, standard spindle M14, electronic control panel with LED and additional handle mounted on two sides.

Such equipment allows you to conveniently adjust the operating parameters to the material being processed and maintain full control during cutting, grinding and surface cleaning.

Brushless motor 950 W – greater efficiency and longer service life

Brushless motor eliminates the elements most exposed to wear, thanks to which the device works more efficiently, achieves higher energy efficiency and does not require brush replacement.

This means stable power both when cutting steel and grinding concrete, stone or structural elements.

In addition, lower operating temperature translates into greater durability of the entire drive and better use of energy stored in batteries.

Two 4.0 Ah batteries – virtually no downtime

The set includes 2 powerful 21V lithium-ion batteries with a capacity of 4.0 Ah, so that one can power the device and the other can remain in the charger.

This solution allows you to maintain continuity of work during renovations, assembly of steel structures, roofing or workshop works, without having to wait long for recharging.

Switch with continuous operation lock

The grinder is equipped with an ergonomic switch with the possibility of blocking continuous operation, so there is no need to constantly hold the button during longer work.

This solution significantly increases convenience when cutting more elements, grinding long surfaces or removing rust.

The hand remains less loaded, and driving the device is more natural and comfortable, especially during multi-minute work.

Battery Charge Indicator

Each battery is equipped with its own set of LED lights indicating the energy level.

This allows you to check the available energy reserve before starting work and avoid unexpected discharge during demanding tasks.

LED Control Panel – All Information at Your Fingertips

The electronic panel on the housing allows for quick control of the most important device parameters.

The following are displayed:

✅ selected operating speed

✅ charge level of the installed battery

This eliminates the need to interrupt work to check settings or power status.

3-stage speed control

The ability to choose one of the three speeds allows you to choose the right rotation for the job.

3000 rpm /min

✅Accurate grinding

✅processing of more delicate materials

✅finishing works

5000 rpm /min

✅universal application

✅ surface preparation

✅removal of rust and paint

8000 rpm /min

✅fast cutting of steel

✅constructive work

✅Intensive grinding

Proper speed adjustment increases the comfort of work and allows for better machining results.

Slow start function

Once started, the device gradually increases the rotational speed instead of immediately reaching maximum revolutions.

This reduces the during take-off, facilitates reliable handling of the grinder and reduces the load on the transmission and motor.

Thread M14

The standard M14 thread guarantees compatibility with a huge number of discs and accessories available on the market.

There is no need to look for dedicated attachments – popular solutions used in most angle grinders fit.

125 mm discs – the most popular size

Support for discs with a diameter of 125 mm ensures very wide availability of accessories.

Additional handle mounted on two sides

The side bracket can be mounted on the left or right side of the device.

This allows you to comfortably adjust the setting for both right- and left-handed people and increases control when cutting and grinding from different angles.

Working without a cable

Cordless power supply gives full freedom of operation where access to the electricity network is difficult.

Contents of the set

✅ Cordless Angle Grinder

✅2 Li-Ion 21V 4.0 Ah Batteries

✅Charger

✅ Shield cover

✅Side grip

✅Key for disc replacement

✅Instructions for use

The grinder is perfect for:

• roofing works
• installation of fences
• construction of steel structures
• renovation works
• cutting elements on scaffolding
• work in the garage and workshop
• processing of materials outside the building

The absence of a cable means greater convenience, easier maneuverability and faster organization of the workstation.

Application

• steel cutting
• aluminium cutting
• cutting of paving stones
• Grinding metal
• Rust removal
• cleaning of welds
• concrete and stone processing

⚙ Technical specification⚙

Supply Voltage: 21 V

Battery capacity: 2 × 4.0 Ah

Battery type: Lithium-ion

Engine Type: Brushless

Rated Power: 950 W

Disc diameter: 125 mm

Rotation speed: 3000 / 5000 / 8000 rpm /min

Speed control: 3-degree

Slow start function: Yes

Spindle Size: M14

Side handle: Assembly in 2 positions

Control Panel: Yes

Selected gear indicator: Yes

Charge Level Indicator: Yes

We invite you to our other auctions. We have a wide range of workshop tools, carpentry, locksmith tools and health and safety articles.

Thank you for choosing our offer and we wish you a successful shopping experience.

Team Tools in Decha

Specifications