Įkraunamas akumuliatoriaus lygintuvas, 24V/12V, 6A

Trumpai apie prekę

Prekė: Įkraunamas akumuliatoriaus lygintuvas, 24V/12V, 6A. Kategorija: Baterijų įkrovikliai.

• Gamintojas: MW Power
• Modelis: MWSC6A12V24V Do Akumulatora Żelowego

Key Benefits of the Charger:

MW-SC6B is a professional charger for wet lead-acid batteries, gel batteries and AGM with a nominal voltage of 12V and 24V.

✅ Very simple and intuitive operation of the device (instruction manual included).

✅ High charging current - up to 6A - will quickly replenish the energy in the battery.

✅ Has useful hook that allows you to hang the device anywhere.

✅ Instant connection of the battery is provided by clamps and eye clamps included in the set.

✅ LCD display shows charging parameters on an ongoing basis.

✅ Detects battery status and has desulphurisation mode.

✅ Long wires provide a long connection range of the device (from the input side 1,5m and from the output side 1,6m).

Choose reliability – buy a rectifier now!

✅ The most important parameters:

• Input voltage: 220-240V
• Output voltage (max): 14,7V and 29,4V
• Output current (selectable): 1A/3A/6A and 1A/3A
• Output power: 88,2W
• Capacity of supported batteries: 3.3Ah-180Ah (12V) and 3.3Ah-90Ah (24V)
• Protection rating: IP65
• Dimensions: 218,4 x 89,5 x 49,5mm (L x W x H)
• Weight: 0,625kg

Full specification in the technical data sheet attached to the offer.

Important information! Before starting the device, read the instruction manual.

Available Modes:

✅Recovery mode - The process of regeneration of heavily discharged or sulphurized batteries by low current pulse charging - applies to rebuilding charging. This mode can be switched on manually or automatically (when the battery is deeply discharged).

✅ Desulfurization mode - Recovery of the capacity of sulphurized batteries by impulse charging with increased voltage breaking down sulphur crystals located on the electrodes - applies to restorative charging. This mode is switched on after the Analysis, in case the battery does not hold the charge.

✅ Charging phases:

1. Initialization.

2. Low current charging.

3 - 6. Constant current charging.

7. Constant voltage charging.

8. Resting loading.

9. Analysis.

10. Maintenance.

Specifications