Hidraulinis butelinis keltuvas Redats LS-160, 20 t

Trumpai apie prekę

Prekė: Hidraulinis butelinis keltuvas Redats LS-160, 20 t. Kategorija: Butelių keltuvai su kotu.

• Gamintojas: Redats
• Modelis: 07-01-89

• Producer: REDATS
• Max. lifting capacity: 20 tons
• Maximum height: 440 mm
• Minimum height: 235 mm
• Base dimensions: 165 x 150 mm
• Weight: 9,8 kg
• Catalog Index: 07-01-89

Tightness of the structure

The bottle lift is an extremely tight and durable construction - the perfectly tight structure ensures that the lift retains its structure and reliability for years.

Convenience of activities

The bottle lift is equipped with a two-piece handle - the folding element allows much easier work when lifting cars.

Purpose

Such lifts are also perfect for heavier vehicles - agricultural machinery, vehicles and trailers, as well as for completing workshop equipment (e.g. construction of a hydraulic press).

Remember about safety

The device uses a single-acting actuator. It is designed exclusively for lifting the load up/pressure one way. The actuator does not have safety latches that could support the weight.

What does this mean for you?

Once the load is lifted, additional support should be provided as soon as possible. The device cannot be used as a support for weight.

Why shouldn't the weight rest on the actuator?

The weight of the lifted element held in the raised position will lead to inevitable wear of the actuator. This can lead to the actuator leaving. Pick up the car and support it on the mare.

FAQ

What cars is this 20T bollard lift suitable for?

This bollard lift makes sense when you are working on very heavy vehicles. It will work, for example. for agricultural machinery, vehicles and trailers.

Is the bollard lift safe to use?

Yes, this lift is safe to lift, provided you do not exceed 20T lifting capacity. After lifting, immediately support the vehicle on the mare - do not leave the weight on the lift itself.

What substrate can I use this lift on?

Use this lift only on hard, even and stable ground. Do not put it on soft ground, gravel or sloping surface.

What is the adjustment screw at the top of the lift used for?

The adjustment screw is used to set the height of the lift before lifting the car (you will do it manually). This makes it easier to reach the support point and you do not have to pump from the lowest position right away.

How to vent the hydraulic system in this lift?

To vent the hydraulic system in this jack, turn off the lowering valve - the one at the bottom. Lift the lift “empty”, without load, to the top. Loosen the lowering valve. Press the plunger with your hand and lower it to the bottom. Repeat this step several times. After a few repetitions, lower the handle, push the piston rod down and, using a flat screwdriver, gently tilt the eraser, which is in the cylinder housing to vent the actuator.

Do I need to change or refill the oil in this model?

Yes, check the oil level in this model regularly, preferably before the season and when the lift was no longer used. Use hydraulic oil to refill or replace, e.g. HL-32.

How to check the oil level in this lift?

With the lift lowered, remove the rubber from the actuator housing. When the lift is upright, the oil should be flush with the hole in the cylinder.

How is the lowering valve handled in this lift?

You operate the lowering valve with the handle. You insert its tip into the valve seat at the base of the jack and gently twist it to lower the plunger. The harder you unscrew the valve, the faster the lift will fall.

Quality REDATS!

By choosing REDATS you buy from the official distributor of devices of this brand in Poland and Europe. REDATS devices are manufactured in leading factories of this type of equipment, so you do not have to worry about the standards of workmanship or used parts.

Distributor of tools and machines REDATS is a company operating successfully on the Polish and international market since 2006. It is a recognized entity that has already gained the trust of over 500 000 recipients. When buying REDATS machines, you can count on professional and comprehensive support at every stage of the purchase or use of equipment.

Specifications