Elektros generatorius 5,2 kW su elektriniu paleidimu, AVR, variniu statoriumi ir valandomis skaitikliu

Trumpai apie prekę

Prekė: Elektros generatorius 5,2 kW su elektriniu paleidimu, AVR, variniu statoriumi ir valandomis skaitikliu. Kategorija: Elektros generatoriai.

• Gamintojas: Kowal Polska
• Modelis: A3 PRO
• Įtampa: 230 V

MAX ENGINE POWER: 5,2 kW

POWER MAX GENERATORS: 3,5 kW

✅ Electric start with key + manual start

✅ Containable battery 7 Ah

✅ New model with extended generator

✅ Stand wound with fully copper wire

✅ OHV engine with a maximum power of 5,2 kW / 7 HP

✅ Maximum generator power up to 3,5 kW

✅ Full power available from one 230 V socket

✅ Built-in on-board computer

✅ Motor hours counter

✅ AVR Voltage Stabilizer

✅ Foots for stable positioning during operation

✅ Output 12 V

✅ Mute silencer chamber

✅ Wheels and transport handles

✅ Intelligent throttle that responds automatically to load changes

✅ 0,6 l engine oil FREE

The stator and rotor are among the most important and expensive components of the entire unit.

In many similar devices, stators with a length of about 70 – 100 mm and windings made of materials only covered with a layer of copper are used.

The blacksmith units with a 5,2 kW engine use a stator with a length of up to:

Importantly, the stator was wound with fully copper wire.

✅ Stand with a length of 120 mm

✅ Full copper winding

✅ Extended generator core

✅ More wire wound

The latest version of A3 uses an extended generator with more copper winding.

The maximum power of the generator is:

At an operating frequency of 50 Hz, the constant power is 2800 W.

A higher power reserve means that when powered by the same receiver, the unit can use less of its maximum capabilities than a weaker model.

In practice, this means:

✅ more power

✅ lower percentage load on the unit with the same receiver

✅ more favorable operating conditions of the generator

✅ better preparation for long-term use

The blacksmith A3 PRO model combines a powerful single-phase generator, full copper winding and solutions responsible for comfortable and stable operation of the device.

One of the most important features of the A3 is the single-phase 230 V design, thanks to which the full power of the unit is available for single-phase receivers.

This is especially important when powering devices that require more power, such as:

✅ power tools

✅ construction equipment

✅ garage and workshop equipment

✅ devices on the plot

✅ basic household appliances

✅ kettle, microwave or oven

The AVR stabilizer and intelligent throttle automatically responding to load changes are also responsible for the proper operation of the team.

The latest blacksmith A3 PRO received a number of design changes prepared for more frequent and demanding operation.

✅ New, original look

✅ Next generation silencer – quieter engine operation and better adaptation to long, intensive operation

✅ Thicker frame – greater rigidity of the structure and better protection of components

✅ Hardened valves – increased resistance to wear and firing and longer periods between necessary adjustments

✅ Bold castings of the internal combustion engine body and stator base

✅ Third generation voltage regulator

✅ Additional pair of shock-absorbing rubbers under the motor and generator

✅ New type of generator with more wire wound

The A3 PRO version received specific changes including engine, generator, frame, vibration damping system and voltage stabilization.

• motor power / max generator power at 60 Hz: 5,2 kW / 3,5 kW
• Constant power at 50 Hz: 2800 W
• full power from one socket
• fuel: pure petrol 95 or 98
• compatible with E10 petrol
• Fuel tank capacity: approx. 15 l
• start-up: electric and manual
• Battery: 7 Ah
• Rated voltage: 230 V
• rated frequency at 3000 rpm /min: 50 Hz
• built-in AVR – voltage regulator
• weight with packaging: approx. 48 kg
• dimensions: 45 × 60 × 44 cm
• Rectifier output: 12 V
• engine displacement: approx. 200 cm³
• recommended oil: 10W-40 or SAE30
• oil bowl capacity: approx. 0,6 l
• correct oil level: to the bottom edge of the infusion hole
• first oil change: after 5 hours of operation, another every 50 hours
• automatic regulation of rotation and voltage
• voltmeter
• Silenced engine operation
• Relaxer for easy start-up
• motor and generator mounted on shock-absorbing cushions
• engine speed: approx. 3000 rpm /min
• combustion: approx. 0,7 – 1,1 l/h

The copper generator works with the popular AL170F engine with a maximum power of 5,2 kW / 7 HP, based on the Japanese OHV design.

The engine is manufactured on behalf of the KowaL Polska brand using high quality key structural elements:

✅ shaft

✅ piston

✅ Cord

✅ valves

The unit was properly combined with the elongated generator core of the A3 PRO model.

The power supply system also uses the SPD carburetor, selected for the engine characteristics and operation of the unit.

The blacksmith A3 PRO model is equipped with an intelligent throttle system that automatically responds to changes in the load of the generator.

The system helps to maintain the working turnover at the level of approximately:

This is important for stable operation of the unit and maintaining the correct frequency of generated current.

When changing power consumption, the system regulates the engine operation and fuel dose accordingly.

✅ automatic response to load change

✅ maintaining proper working turnover

✅ more stable frequency

✅ optimal fuel use

✅ no need for continuous manual throttle adjustment

The whole is done automatically during the operation of the aggregate.

✅ Chrome fuel cap – solid and aesthetic finish of the tank

✅ Fuel filter – helps protect the fuel system from contamination

✅ Readable fuel level indicator – quick control of the amount of gasoline in the tank

✅ Mute silencer chamber – improves comfort of use

✅ Output 12 V – increases the functionality of the unit

✅ 2× plug 230 V

✅ 12 V cables

✅ 0,6 l engine oil FREE

The A3 PRO is equipped with an automatic AVR voltage regulator, which stabilizes the output voltage and reduces its fluctuations during changing loads.

Thanks to this, the unit provides stable parameters of the generated current and works well as a power source:

✅ home

✅ workshop

✅ garage

✅ plots

✅ power tools

✅ many popular utility devices

The unit is packed in thick, original cardboard and additionally secured with transport belts.

This solution limits the possibility of movement of the device inside the package and reduces the risk of damage during transport.

The high-quality battery guarantees trouble-free firing of the device even in the most difficult conditions!

It is fully maintenance-free - it is charged during the operation of the agragate automatically without user intervention!

Tubeless wheels on the axle ensure easy handling and virtually maintenance-free operation of the suspension system. Fully cast (uninflated) wheels are puncture and deformation resistant. The addition of rubber improves the cushioning of the unit, which translates into lower noise levels.

The latest blacksmith A3 PRO is equipped with a clear on-board computer that allows you to control the most important operating parameters.

The computer displays:

⭐ voltage of generated current

⭐ frequency of generated current

⭐ working time since last launch

⭐ total mileage of the unit expressed in hours

All you need to operate is one button, which the user switches between individual information.

The hour counter also makes it easier to control the oil change dates and periodic maintenance.

✅ELECTRIC START-UP

✅2x 230v socket

✅fuel filter

✅keys (2 pieces)

✅key for candles

✅wheels (2 pieces)

✅transport handles

✅double-sided screw driver (cross, flat)

✅Bottle of oil FREE 0,6 L

✅2 anti-vibration feet

✅nuts and mounting screws

✅instruction PL

✅warranty card

✅Manufacturer's declaration of conformity

✅ KowaL Polska brand – thousands of devices sold

✅ Realistic technical parameters

✅ Professional advice before purchasing

✅ Own service

✅ Availability of spare parts during the warranty and post-warranty periods

✅ Technical support even after purchasing the device

When purchasing a generator, it is worth paying attention not only to the product itself, but also to the availability of service and spare parts in the following years of use .

Specifications