Dvipostė automobilių kėlimo platforma 4,2T REDATS L-205F 230V pusiau automatinė su alyva

Trumpai apie prekę

Prekė: Dvipostė automobilių kėlimo platforma 4,2T REDATS L-205F 230V pusiau automatinė su alyva. Kategorija: Kolonų keltuvai.

• Gamintojas: Redats
• Modelis: 30-08-29

• Brand: REDATS
• Symbol: 30-08-29
• Maximum lifting capacity: 4,2 tons
• Type: semi-automatic
• Reinforcement frame: no
• Arm length range: 800 - 1220 mm
• Floor thickness: 30 cm
• Beam: Lower
• Power Supply: 230V
• Lowering time: 25 seconds
• Lifting time: 45 seconds
• Maximum width of the car: 2616 mm
• Lifting height: 110 - 1910 mm
• Limit switch: yes
• Engine power: 2.2 kW
• Telescopic lift arms: YES
• Anchors included: yes
• Meets UDT certification requirements: YES
• Weight: 590 kg
• Dimensions (W x H): 3648 x 2850 mm

What kind of lift is that?

It's a semi-automatic two-column lift. It is single-phase (230V), so you do not need to have a 3-phase power supply.

On this lift

• lift passenger cars and light commercial vehicles - lifting capacity 4,2 tons
• repair the suspension or chassis
• You can handle wide cars - max. width 2616 mm
• you have comfort even if you are tall - raises to 191 cm

What distinguishes it from the L-205?

The way it's powered. L-205F can be connected to a regular outlet - just 230V, you do not need 400V.

How is it different from its predecessor, the L-200F?

We have made some important changes that will make your work more efficient. What exactly has changed?

“We have increased the lifting capacity by 200 kg (now 4,2 tons), so you can handle an even greater range of vehicles without worrying about overloading.

- You will be able to lift the car 10 seconds faster (now it is only 45 seconds), which means more time for repair and more work efficiency.

- With this lift you can handle cars with a width of 261,6 cm (i.e. 11,6 cm wider than on the previous model) expanding the possibilities of your workshop.

- Symmetrical arms ensure precise positioning of the vehicle, making it easier to carry out repairs.

The dimensions of the machine and the lifting height have also changed. You can check all the details below.

What else is worth knowing about him?

• Producer: REDATS
• Maximum lifting capacity: 4,2 tons
• Type: semi-automatic
• Beam: Lower
• Power Supply: 230V
• Lowering time: 25 seconds
• Lifting time: 45 s
• Maximum width of the car: 2616 mm
• Lifting height: 110 - 1910 mm
• Column base dimensions: 380 x 450 mm
• Floor thickness: 30 cm
• Limit switch: yes
• Engine power: 2,2 kW
• Telescopic lift arms: YES
• Arm length range: 800 - 1220 mm
• Reinforcement frame: no
• Anchors included: yes
• Meets UDT certification requirements: YES
• Dimensions (W x H): 3648 x 2850 mm

Isn't 230V enough?

As a user, you will not feel the difference compared to a 400V jack. The lowering and lifting time is the same as in the model powered by a three-phase motor.

Operation is also extremely simple!

Quickly and easily position the lifter in the desired position - simply press the button (lift) or release the locks from the columns and use the lever to start lowering the lift!

Simple, isn't it? You will quickly learn how to use this device. An additional advantage of such a solution is the possibility of emergency leaving the car in the event of a complete power outage / power supply.

Long-term durability

Perfect quality of components (durable chain and controls) and careful workmanship guarantee reliable use for many years.

In addition, we have all standardized parts for this lift, such as rubber, hydraulic or electronic components.

Preparation of the substrate

Basic requirements for the preparation of the substrate for the installation of a two-column lift:

• The surface of the substrate is 1,5m x 4m x 30cm.
• Maximum flat surface.
• Minimum floor thickness: 30 cm.
• Concrete class B25.
• 28 days, waiting time for the floor to dry and harden (in the case of a fresh spout).
• The floor must be in the form of a homogeneous concrete slab, with the above-mentioned parameters.

Important!

Before buying, be sure to check the location of the support points in the cars you want to service.

Power cord with plug must be supplied to the jack by itself

Full security

The lift trolley is equipped with a rubber protection that protects the rim of the car door when opening on the lift.

UDT - to report or not?

You often ask whether you need to report the lift to the UDT (Office of Technical Inspection). According to Polish law, this must be done. Few sellers talk about it, but in light of the regulations, it does not matter whether you use the lift for your business or privately. Whether you work alone or hire people - the lift is worth registering in UDT.

Do you want to report the lift to UDT?

If you want UDT to collect and allow your new lift to be put into operation, it is worth outsourcing its installation to a team with appropriate permissions.

Specifications