Dujinis šildytuvas 20 kW su ventiliatoriumi PIEZO WEBASTO TM181

Trumpai apie prekę

Prekė: Dujinis šildytuvas 20 kW su ventiliatoriumi PIEZO WEBASTO TM181. Kategorija: Oro šildytuvai.

• Gamintojas: Toolme
• Modelis: TM181-1

⚫Distribution Poland - each screw - all available immediately in Poland in 24h

🔴 Heaters 20 to 25 kW work best with a cylinder of 11 kg. Thanks to their low gas consumption and high efficiency, they can operate at full power up to approximately 90% of the cylinder content.

🔴Heaters 30 kW and larger have a much higher demand for gas. After using about half of the 11 kg cylinder, they may not reach full power, and with too little available gas in relation to the demand of the device, gas may also be noticeable.

High heating power allows you to quickly heat a workshop, garage, hall, warehouse or other utility room.

The powerful airflow ensures that heat is distributed quickly and evenly.

Economical operation allows you to effectively heat the room with limited gas consumption.

High energy efficiency and good use of supplied energy.

.

PIEZO igniter for fast start-up and high reliability

You press, start and heat. As simple as it should be.

🔴 Hose + reducer included

🔴 100% thermal efficiency and immediate readiness to work – without additional installation.

For heating, drying and defrosting in construction, warehouses and animal husbandry.

Metal housing, stainless steel heating element and durable plastic base.

Simple, manual design without unnecessary electronics.

The PIEZO igniter ensures fast start-up and high reliability even in intensive use.

⚫ Less electronics – less risk of failure

⚫ Immediate start-up

⚫ Simple operation and full control

You press, start and heat. As simple as it should be.

⚫ Energy Class A

What does this mean ❓

•

🔴 Highest **heat efficiency !**

•

🔴 Least **unburned gas**

•

🔴 Least **smell of unburned gas**

•

🔴 Lowest gas consumption with high heat output!

🔴 The combustion process takes place in an open combustion chamber, the air sucked in by the fan is insulated and then blown out of the heater. It does not require a chimney, you only need to provide air supply to allow proper combustion.

🔴The heater can be connected to 5 or 11 kg propane/butane gas cylinder.

- B series air heaters achieve 100% efficiency, because the total heat from the combustion of gas is delivered to the heated room.

- the fan located on the back of the heater pushes air around the combustion chamber ensuring its immediate heating.

• Manufacturer: TOOLME
• Model: TM181
• PIEZO igniter
• Fuel: LPG/propane/gas
• Heating power: 20 kW
• Power supply voltage: 230V/50Hz
• Power Gas Pressure: 300mBAR - 0,3 Bar
• Maximum gas consumption: 0,73kg/h
• Heating area: 220m2
• Performance: 410m3/h
• Dimensions: 330x220x330mm
• Heater weight: 3,6 kg
• Weight with packaging: 4.3kg
• Heater dimensions: 365 x 190 x 315mm

• Proven brand Toolme
• Enlarged turbine fan
• Built-in piezo igniter
• Low combustion
• Hose and reducer included (only an ordinary gas cylinder is needed to install, the rest is included)
• Recognized brand - high quality
• Complete and mobile heat source
• Quick obtaining of thermal comfort
• Quiet operation
• efficient and economical equipment
• Highest aesthetic quality
• Handy handle
• Small dimensions of the device
• Overheating protection shutting off the gas supply

• Heater 20kW TM181 Toolme with THERMOSTAT
• Gas hose
• Reducer
• User manual in Polish

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Brand	Toolme
Parametry	Kind	gas
Parametry	Heating power	20 kW
Parametry	Model	TM181-1
Parametry	Product weight with unit packaging	3.9 kg
Parametry	Manufacturer code	TM181-1
Parametry	Packaging status	original
Parametry	Energy efficiency class	A++
Parametry	Range of energy efficiency classes	no energy class
Parametry	Certificates of conformity	CE,WEEE