Dirbtuvių įrangos dalinis finansavimas (ES parama)

Trumpai apie prekę

Prekė: Dirbtuvių įrangos dalinis finansavimas (ES parama). Kategorija: Keltuvai stulpams.

• Gamintojas: S-Tools
• Modelis: WYPOSAŻENIE_WARSZTATU26

Brand new, branded items of the highest quality covered by the warranty. By buying from us you are guaranteed long-term satisfaction. We sell tools and devices proven by many years of experience and provide the lowest prices!!!

Minimum warranty period of 12 months maximum perpetual.

1. Two-column lift 4 tons model QJY4.0

The QJY4.0 two-column semi-automatic hydraulic lift with two cylinders is the ideal equipment for car workshops operating vehicles weighing less than 4.0 tons.

Advantages of QJY4.0: simple operation, safe use, simple operation, good synchronization, no vibration phenomenon, etc.

The QJY4.0 two-column two-cylinder hydraulic jack is an advanced device with asymmetrical arms, double hydraulic cylinders, plate chain traction, synchronized steel wires and internal slip. It is built with mechanical parts, hydraulic parts and electrical system.

Technical parameters:

• Lifting capacity: 4,0 t
• Maximum lifting height: 1800 mm
• Total height: 2722 mm
• Lifting time: 50 seconds
• Supply Voltage: 400 V
• Total width: 3530 mm
• Width between columns: 2480 mm
• Arm spacing: 653-938 ; 753-1137 mm

2. Italian compressor brand Air Compressor GG 560 powered by 400V with pump B3800B on a tank with a capacity of 200l.

Two-cylinder oil lubricated piston compressor with one compression stage equipped with:

• cast iron cylinder
• Aluminium alloy pistons
• stainless steel valves
• air cooler and pulley for optimal compressor cooling
• Slow-speed unit (1200 revolutions/min) for longer service life
• Tank 200 liters powder coated and corrosion protected equipped
• in condensate drain valve
• Pressure switch (presostat) with relief valve and thermal protection to protect the motor against overload
• Vertical pressure reducer with pressure gauge has two quick coupler sockets
• Heavy-duty wheels improve compressor mobility

Technical parameters:

• Power supply - 400 V
• Tank capacity - 200 Liters
• Pump type - B 3800 B
• Compressor speed - 1200 rpm
• Number of pistons - 2
• Number of compression stages - 1
• Noise level - 94,9 db
• Theoretical capacity - 476 l/min (28,6 m3/h)
• Effective capacity - 335 l/min (20,1 m3/h)
• Maximum pressure - 10 Bar
• Engine - 3,0 kW (4,0 hp)
• Weight: 110 kg
• Dimensions: 1400x540x98

3. 20 TON Hydraulic Workshop Press With Pressure Gauge

• Lifting capacity: 20 TONNES
• Piston extension (piston stroke): 145 mm
• Maximum working range: 1035 mm
• Net weight: 34/56 kg
• Gross weight:35/57 kg
• Package Dimensions: 1600x260x280 mm
• Pressure gauge filled with glycol

4. Workshop hydraulic lift so-called. crane 2,0T

• Maximum lifting capacity of the device 2 tons
• Lifting range 25 - 2382 mm
• Adjustable length swaps from 950mm x 1500mm
• Equipped with a chain with a hook at the end of the arm
• Easy to maneuver - 6 swivel wheels
• Folding frame

This device is able to carry weights of up to 2 tons, up to a height of 2382 mm. When mounted on the crane arm of the appropriate sling, the crane allows lifting, removing and installing engines, gearboxes, etc. heavy elements. Widely spaced and far-reaching stringers of the lower frame guarantee proper stability of the crane and facilitate its entry under the chassis of the vehicle or assembly station. The lower frame of the crane is also mounted on six swivel wheels, which ensure efficient maneuvering of the device with a suspended load.

5. Professional, most versatile compression/compression pressure test kit for cars with diesel engines.

Extensive professional compression pressure tester for diesel cars. The meter is designed to measure the compression pressure in diesel engines.

The meter can be used for virtually any car model.

The kit comes with a set of tips for most diesel engines produced in the world.

The set includes:

• pressure gauge up to 70 Bar (1000 Psi) with cable, quick coupler and release valve,
• measuring adapters

Application:

For measurement and diagnostics of compression pressure in Diesel engines, in passenger cars and vans brands: VW, Audi, Seat, Skoda, Fiat, Alfa Romeo, Lancia, Peugeot, Ford, Opel, Toyota, Mercedes, Rover.

6. Professional universal compression / compression pressure test kit for cars with gasoline engines included with 5 tips.

The sampler is designed to measure the compression pressure in gasoline engines.

Gasoline Compression Pressure Gauge Large + 4 Additional Tips

UNIVERSAL SET

Fits all candle sockets small and LARGE candle

It has a total of 5 tips: pressure and screw-in:

3 - screw-in

2 - pressure

Pressure gauge up to 20bar

The sampler is designed to measure the compression pressure in gasoline engines.

The measuring tips can be easily and conveniently replaced via a quick coupler.

7. Rectifier with Magnum Dinamik 440 start-up assist function.

RECTIFIER WITH START 12/24V MAGNUM DINAMIK 440

Magnum Dinamik is a rectifier device for charging 12V and 24V batteries and for starting assistance meeting the requirements of European standards in terms of safety and electromagnetic compatibility. The devices have the ability to regulate the output characteristics, i.e. its independence from fluctuations in mains voltage. It has a switch for selecting the charging voltage and the ability to set the desired charging time. The rectifier is equipped with protection in case of short circuit of output wires, overload and reverse connection to the battery poles. It also has thermal protection against excessive heating of the transformer as a result of e.g. short circuit of the cell in the battery. The device comes with a warranty card and an instruction manual in Polish.

Technical data:

• Supply voltage - 230V / 50Hz
• Charging power - 0,8 kW
• Starting power - 1,6 kW
• Charging Voltage - 12 / 24V
• Charging Current - 60A
• Starting current - 400A
• Max battery capacity - 700Ah
• Number of charging stages - 4 + start-up
• Weight 16 kg

PRODUCER: MAGNUM

8. Professional set of sockets / wrenches for oil filters 14 elements.

Brand new item. Warranty from Complex Service 12 months.

• Key Number, Size (mm), Number of Angles, Application
• HC-65/14, 65, 14, GM, Daihatsu, Toyota
• HC-68/14, 68, 14, Mazda, Ford Escort, Subaru
• HC-73/14, 73, 14, Toyota, Lexus
• HC-74/76, 74-76, 15, Saturn
• HC-76/14, 76, 14, VW, Porsche, Mercedes, BMW, Audi A3, Opel
• HC-80/15, 80, 15, Nissan, Honda, Mazda, Isuzu, Subaru, Opel, Toyota
• HC-93/15, 93, 15, Opel, Mazda, Volvo, Mitsubishi, Nissan, VW, Porsche, Renault, Ford, Honda, Audi
• HC-93/36, 93, 36, Ford
• HC-65/67, 65-67, 14, Daihatsu
• HC-80/82, 80-82, 15, Mazda, Subaru, Toyota, Honda, Acura, Nissan
• HC-90/15, 90, 15, Honda Accord, Mitsubishi, Isuzu
• HC-75/77, 75-77, 15, VW, Audi, Ford, Isuzu, Mercedes, Opel
• HC-76/30, 76, 30, Ford
• HC-100/15, 100, 15, Isuzu, Mitsubishi

3/8" TO 1/2" REDUCTION INCLUDED

9. Workshop trolley 254 elements

Professional workshop trolley with 7 drawers on ball bearings, equipped with a central lock and additional lock of individual drawers.

The trolley is mounted on large wheels, has a brake.

Reinforced double sheet construction, perforated rubber corner guards and a top with plastic working compartments.

Sturdy construction allows you to mount the vice on the countertop and additional towel holders or chemistry on both sides of the stroller

• Height 97 cm
• Depth 46,5 cm
• Width 77 cm

1. DRAWER

• set of 7 flat screwdrivers : 6x38-3x75-3,5x75-4x100-5,5x100-6,5x150-9x175mm
• set of 7 cross screwdrivers : PH2x38-PH0x75-PH1x100-PH2x100-PH3x150-PH4x200
• set of 6 insulated screwdrivers : flat 3x75-4x100-5,5x125-6,5x150mm
• Cross: PH1x100-PH2x100
• set of 7 precision screwdrivers : flat 2x40-2,5x40-3x40-1,8x40mm
• Cross : PH000x40-PH00x40-PH0x40
• TORX : T5-T8-T10-T20-T25-T27-T30-T40

2. DRAWER

• set of 6 Allen wrenches type T with ball : 2x75-2,5x75-3x100-4x100-5x150-6x150mm
• set of 5 files : round semicircular, flat, square, triangular
• + Set of 67 bits
• 3 bit adapters

3. DRAWER

Tools 1/4"

• Set of 13 1/4" sockets: 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14mm
• Universal joint 1/4"
• 1/4" 50mm extension
• 1/4" 100mm extension
• 1/4" cross knob
• 1/4" 150mm ratchet
• 1/4" rigid knob

Tools 3/8"

• set of 17 3/8" sockets: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22mm
• 3/8" universal joint
• 3/8" 75mm extension
• 3/8" extension 150mm
• 3/8" cross knob
• 3/8" 16mm and 21mm candle cap
• 3/8" 195mm ratchet
• set of 7 TORX E sockets inner profile : E10-E11-E12-E14-E16-E18-E20

Tools 1/2"

• set of 17 1/2" sockets :-8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32mm
• Universal joint 1/2"
• 1/2" extension 125mm
• 1/2" extension 250mm
• 1/2" cross knob
• 1/2" 245mm ratchet

4. DRAWER

• Universal pliers ( pliers) 200mm
• Extended flat pliers 200mm
• side cutters 185mm
• Self-clamping pliers MORSEA 250mm
• Adjustable pliers 250mm
• locksmith hammer with fiberglass shank 300g
• plastic hammer with fiberglass handle

5. DRAWER

• set of 8 double-sided bent eye wrenches (hoof wrenches): 6x7;8x9;10x11;12x13;14x15;16x17;18x19;20x22mm
• set of 17 spanner wrenches: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22mm
• set of 9 1/4" long sockets : 5,5-6-7-8-9-10-11-12-13mm
• set of 9 long Allen wrenches with ball : 1,5-2-2,5-3-4-5-6-8-10mm
• set of 3 flat screwdriver sockets : SL4-SL5,5-SL7
• set of 3 PH cross screwdriver sockets : 1-2-3
• set of 3 PZ cross screwdriver sockets : 1-2-3
• Set of 8 TORX screwdriver sockets: T8-T10-T15-T20-T25-T27-T30-T40
• Set of 6 IMBUS screwdriver sockets: H3-H4-H5-H6-H7-H8

6. Empty

7. Empty

10. KING TONY 34423-1A TORQUE WRENCH 1/2'', 42 - 210 Nm

Torque wrench 1/2" King Tony. The rattle has 24 teeth (jump every 15 degrees).

Moletized handle with lock. Torque adjustment in the range of 42~210 Nm every 0.1Nm.

Total length of the wrench 450mm.

11. Professional 1/2" 1322 Nm Impact Pneumatic Wrench by m7.

Proven power. Key after 2 seconds. The work reaches 881Nm.

This is the key model most often chosen by professional vulcanization services and more.

TECHNICAL DESCRIPTION:

Reliable, very durable, handy and very strong wrench ideal for heavy work np.przy wheels. Composite construction ensures low weight and durability. The low air demand ensures that the wrench operates quietly even with less efficient compressors.

Technical parameters:

• Spigot – ½”
• Max torque (Nm) – 1322
• Max moment after 2 seconds. work (Nm) – 881
• Speed (rpm) – 9000
• Air consumption (l/min) – 119
• Operating pressure (bar) – 6,3
• Length (mm) – 195,0
• Weight (kg) – 2

Equipped with Twin Hammer Dual Impact Mechanism.

Efficient and reliable torque during operation.

Right/left and speed can be controlled simultaneously by multifunction switch.

The lightweight composite housing significantly reduces the weight of the key.

The streamlined design allows for a secure grip.

The light weight makes it the lightest in its class.

High torque allows you to unscrew sealed screws

13. Professional sink - sucker 90 liters with control tank.

• TANK CAPACITY 90 LITRES
• CAPACITY OF THE COLLECTION TRAY 8 LITRES
• CAPACITY OF GLASS METER 8 LITERS
• HEIGHT 1730 MM

14. Professional vise Bison Bial 150 mm

CHARACTERISTIC:

- Chamber width: 5cm

• Movable body and jaw made of high quality cast iron with guaranteed strength
• Replaceable jaw inserts, induction hardened and ground, incised molet guarantees secure and safe fastening
• Jaw inserts have a horizontal and vertical prism
• Possibility of fixing pipes and rods thanks to the appropriate shape of the movable jaw
• Thoroughly shielded against chips and contaminants pull screw
• Long service life

Technical data:

• Size S - 150L
• Max. clamping force - 3400
• Weight - 16, 2 kg

Recommended as basic equipment for milling machines, drills, planers, etc.

15. Professional contoured workshop couch with pillow

• Height: 11.5 cm
• thick, comfortable pillow
• max. Load: 150 kg
• 6 wheels ø 75 mm
• 2 containers on the sides
• Dimensions: 1010 x 467 x 130 mm
• Weight: 4.8 kg

MANUFACTURER: ASTA

16. Professional hydraulic jack for gearboxes

TECHNICAL SPECIFICATION:

• Lifting capacity (t): 0,5
• Lifting height (mm): 1000-1900
• Net weight (kg): 30
• Gross weight (kg): 35
• Package Dimensions (mm): 1150x280x290

17. Professional brake piston service kit containing 21 elements including left and right swivel presses

The set includes 2 presses (right and left swivel), a clamp saddle press bar and 19 adapters adapted to the size of brake pistons used in most passenger cars manufactured on the European and Asian markets.

Audi, Fiat, Ford, Isuzu, Handa, Jaguar, BMW, Mercedes Benz, Mitsubishi, Nissan, Toyota, Renault, Volvo, Citroen, Opel, SAAB, GM and VW AND OTHERS.

The set is made of high-quality steel, packaged in a sturdy plastic case

The knob is equipped with a magnetic tip to hold each adapter.

It is perfect for working with ceramic pistons.

18. Professional set for operating alternators

Professional set of keys for mounting and disassembling BOSCH and MAGNETI MARELI alternators.

Suitable for cars of the following brands: AUDI, BMW, FIAT, FORD, MERCEDES, OPEL, PORSCHE, RENAULT, PEUGEOT, SEAT, SKODA, VOLVO, VW and others.

The wrenches allow you to unscrew the pulley mounting screw at the same time (using the appropriate bit), and hold the wheel with the clutch (using a specialized overlay).

1/2' SHANK WRENCH: TORX T50 WITH SLIDING WRENCH 33 TEETH (BOSCH TYPE), L=110mm.

SHANK WRENCH 1/2': SPLINE (XZN) M10 WITH SLIDING WRENCH 33 TEETH== BOSCH TYPE), L=110mm 6-ANGLE BIT: TORX T40, L=75mm 6-ANGLE BIT: TORX T50, L=75mm 6-ANGLE BIT: SPLINE (XZM) M8- L=75mm 6-ANGLE BIT: SPLINE (X10M) 6-angle 15mm x 33 teeth (Porsche). 6-ANGLE MULTI-SPOUT CAP 22mm x 33 teeth (Mercedes). 6-ANGLE SHANK CAP 17mm x 4 pins (TYPE MAGNETI MARELI). 6-ANGLE CAP 22mm (RENAULT, VOLVO). 1/2' X 10mm BIT ADAPTER. SUITCASE

19. PROFESSIONAL SET OF STEERING ROD PULLERS, THROUGH-HOLES AND STEERING GEARS

Professional 6 - piece puller set for suspension operation including steering rods and ball joints, etc.

20. Professional workshop washer 80l

• capacity 80 litres
• pump capacity: 2,7-3,3l/min.
• permissible amount of cleaning agent: 45l
• basket for small parts
• weight 23 kg

21. Professional set of files by King Tony

A set of metal files with a sawing surface length of 8 inches (200mm) with a comfortable handle. The set includes 5 pieces of files, each file has a different cross-section: rectangle, semicircle, circle, triangle and square. All packed in a neat plastic case with reinforced handles to hang on the wall. Tools from the renowned King Tony company.

WARRANTY: LIFETIME AGAINST DEFECTS IN MATERIALS

MANUFACTURER: KING TONY

22. Set for springs and brake cups

23. Strobe lamp for setting the ignition angle

The strobe lamp is used to set the ignition advance angle in spark ignition engines along with all the necessary wires.

24. Set of caps for oil stoppers 21 pcs.

THE RICHEST TODAY

SET OF SOCKET WRENCHES FOR OIL STOPPERS 21 PCS

THE SET INCLUDES M.IN:

• 5 - Angle: 8, 9, 10, 12, 14, 17 (mm)
• 12 - Angle: 16 (mm)
• 3 - Angle: 10 (mm)
• 4 - Angle: 7, 8, 10, 11, 12, 13, 14 (mm), 5/16”, 3/8”
• KNOB TYPE "T"

3/8" DRIVE

It is possible to modify the set to your needs. Just write.

The ideal set for professionals opening activities co-financed from the Labour Office

or European Union funds.

The cheapest in Poland! Purchase from us is a guarantee of the lowest price, the best quality and thus many years of satisfaction with the purchase!!!

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	S-Tools
Parametry	Manufacturer code	WYPOSAŻENIE_WARSZTATU26
Parametry	EAN (GTIN)	5901588603384
Parametry	Lifting capacity	4000 kg