Diagnostinis skaitytuvas MULTI DIAGCOM PRO+ SINGLE BOARD BT4.3

Trumpai apie prekę

Prekė: Diagnostinis skaitytuvas MULTI DIAGCOM PRO+ SINGLE BOARD BT4.3. Kategorija: Diagnostikos testeriai ir sąsajos.

• Gamintojas: DIAGCOM
• Modelis: OBD2 QNEXT MU9241

DIAGCOM PRO+ Q-Next+ SINGLE BOARD

This is not a storage "bed" from a few years ago!

⭐If you need a set with a laptop, ready to connect, take a look at our other offers.

⭐Car service for 80 years! , which is not possible in cheaper counterparts of this tester !

⭐Only the presented model DIAGCOM PRO+ Q-Next is manufactured on components that are fully compatible with the currently latest drivers 2021.22b, 2021.11B, 2021,B, 10B, 2022 and all older ones, e.g. 2020.23, 2017.3, 5.00.8, 5.00.12, etc.

⭐When considering the choice of this type of diagnostic testers, you should always be guided by its specification - the most important is only the interior of the device.

⭐Proper communication with cars, as well as a list of supported makes and models of cars, depends on the version of the motherboard that the diagnostic interface has. We sell the model with exactly the electronics that is presented in this offer - Single Board

(you need to pay special attention to this, because it is the most important in this type of diagnostic testers, although the boards may look similar compared to others, there may be other components, pay attention to whether the seller shows what motherboard is inside and what relays).

You should also know that DIAGCOM is a universal device. Therefore, among other things, it collects a lot of positive opinions, both in private and professional use.

DIAGCOM is a diagnostic scanner that can handle a very large number of controllers in a huge number of makes, models and years of cars.

The interface works perfectly with laptops, PCs and Windows tablets.

Contrary to reviews, thanks to the latest drivers, it works on Windows 11 , 10 , 8 , 7 , 32/64bit.

After establishing the tester's communication with the car, the operation is very intuitive and simple - in Polish (with the option to choose other languages).

The device has no boot limits and can be operated on multiple computers.

The possibilities of using this device are very large, however, it should be remembered that no MULTIPLEXER and no universal tester will be able to handle all drivers in all cars manufactured in the world (there are no such diagnostic interfaces).

It has a full POLISH menu (including full Polish descriptions of fault codes and diagnostic procedures with the possibility of choosing other languages).

Text and video installation instructions also in Polish!

You can connect your device to your computer via USB cable or wireless Bluetooth.

⭐The kit contains everything you need to start - the device is fully ready to work. You will need a Windows computer to communicate with your car.

The interface works with all popular car diagnostics programs - free access to current drivers / programs.

⭐DIAGCOM Q-Next is characterized by very good workmanship as well as durability in its use.

⭐The interface is equipped with the most reliable and valued TCS MAIN V4.3 motherboard with the latest NEC 5V relays and CHIP 2.9241A, a modified CAN line - this is an improvement of older versions of testers, thanks to which it connects with drivers with which cheaper versions do not stand a chance.

⭐The device is adapted to operate cars with a voltage of 12V and 24V. When the interface is connected to the car, it will check the battery voltage in the vehicle itself and automatically adjust it.

⭐The OBDII cable used to communicate the tester with the car is equipped with an LED light in the plug.

⭐The presented diagnostic device is also equipped with a slot for a MICRO SD memory card.

1. Read and delete errors.
2. Preview of current parameters during car operation.
3. Coding, Adaptations, Calibrations, Execution Tests.
4. Burning/regeneration of DPF particulate filter.
5. Programming of injectors and correction of ignition angle.
6. Reversing terminals electric parking brake
7. Reset service and oil inspection.
8. Key encoding.
9. and much more depending on the brand you choose.

- Reading CAN bus errors

- Reading DTC/ fault codes

- Reading real-time parameters/Live DATA/Graphically

- Reading VIN numbers

- Reading numbers and driver versions

- Reading the stored waveform in memory of various components

- Adaptation of components

- Adaptation of drivers

- Component training

- Forced start of components

- Resumption of operation of Pumps,windmills,mechanisms

- Support for EGR exhaust gas reciculation systems

- Operation/burning/adaptation of DPF particulate filters

- Support for ADBLUE and the entire EKO infrastructure in vehicles

- Support for service modes i.e.:

- service control reset,

- service control reset- In kilometers and time

- brake pad service settings

- setting of electric handbrake

- venting mode of pump and ABS system

- calibration of steering wheel position sensor

- calibration of steering angle sensor

- programming of Injectors

- battery programming

- key programming (list available_)

- NIVO programming, Airmatic/pneumatic suspension

- gearbox calibration

- calibration of pneumatic components

- Activation of hidden functions (highlighting of corners, tempomat, etc. )

- reset mode after accident

Specification

Electronic components:

Single Board!

TCS MAIN V4.3 A+++

2.9241A (corrected version of CHIP)

relays 21 pieces 5V NEC

FT232RL (USB)

BLUETOOTH 4.3 (bluetooth module)

GEZ Transil (protects against surges)

To operate the interface, you will need a pc/laptop/tablet with Win system. 7, 8 ,10,11 32/64bit. Minimum - 2gb ram , 10gb free disk space.

The set includes all the elements that are needed to start / work tester.

In addition :

• Free access to several of the latest programs that are not subject to sale! (you decide which one you choose).
• No launch limit.
• No subscriptions.
• Support for more than 80 car brands
• The tester does not lock after time.
• Connect to your computer via USB or Bluetooth cable
• Support drivers 2021 , 2021.11 , 2021.10 , 2017.3 and newest 2022
• Slot for memory cards to write data .
• Help with commissioning and installation of the device, also remotely.
• LED at the plug
• Pendrive

⭐On our other auctions s available ready-made diagnostic kits with laptop notebook tablet - just go to the tab all items of the seller.

Languages supported:

Polish, English, German, Czech, and others.

OPERATED VEHICLES - PASSENGER CARS, VANS AND TRUCK SERVICES

⭐MORE THAN 80 CAR BRANDS

The device before shipment is tested to confirm the correct operation.

Specifications