Diagnostinis kompiuteris OBD2 LAUNCH CRP919E BT

Trumpai apie prekę

Prekė: Diagnostinis kompiuteris OBD2 LAUNCH CRP919E BT. Kategorija: Diagnostikos testeriai ir sąsajos.

• Gamintojas: Launch
• Modelis: CRP 919E BT Bluetooth Skaner Interfejs Tester

LAUNCH CRP919E BT, OBD2 scanner with two-way scanning tool with 31 service functions.

Wireless communication via: DBScar VII VCI

Fully functional diagnostic instrument for cars

New DoIP & CAN FD protocols

Extension for more than 100 makes of cars (1996-2023)

Powerful Android 10.0 system, 4+64 GB of extended memory and durable 6300mAh battery. Screen 7'' inch.

Tester works in Polish, with an additional WiFi translator option

2-year free updates and OE-level ECU encoding for the same price.

This is the equivalent of the models:

• Launch x431 PRO Mini v3.0
• Launch x431 PROS Mini v3.0

only without adapters for older vehicle models!

ECU coding. The advanced coding function is used to reprogram the vehicle control modules, which allows you to update the vehicle computer software to the latest version, as well as to reprogram the adaptive data for some components after repair or replacement. It provides solutions to problems related to driving smoothness, fuel efficiency, power loss, fault codes, durability of mechanical parts, etc. However, please note that ECU encoding is NOT universal for all vehicles. Please check your VIN number compatibility before purchasing.

Two-way control (active test). Starts coils and actuators for active tests, sends commands to systems/components to check their operating status without using vehicle controls.

CANFD/DIOP. It works for Can FD compatible vehicles, mainly for license plate detection of CAN FD communication protocols such as GM, Jaguar and Land Rover (reading fault codes, data streams and other special features).

EGR adoption. This function is used to teach the EGR (exhaust gas recirculation) valve after it has been cleaned or replaced.

Particulate filter regeneration (DPF). This function is used to carry out DPF replacement or regeneration after increasing fuel consumption and reducing engine power as a result of long-term DPF operation.

Reset the intelligent speed control system. This function is used to adjust the intelligent speed control module after its replacement or repair.

Version comparison: Launch CRP919E BT vs Launch CRP919E.

The CRP919E BT has additional features such as:

• Wireless communication: DBScar VII VCI
• Memory increased to 4GB
• Disk memory increased to 64GB
• Battery capacity increased to 6300mAh
• Added guide function for AUDI and BMW.

31+ commonly used service and maintenance functions, constantly growing number of:

1. ABS venting. When there is air in the ABS system, the ABS venting function must be performed to remove the air from the braking system and restore the ABS braking sensitivity.
2. TPMS reset. When the tire pressure is too low, there is air leakage, tire pressure sensor is replaced or damaged, the tire pressure reset function should be performed to reset the pressure and turn off the tire pressure indicator.
3. Reset the oil gauge. Allows you to perform a reset for a new calculation of engine oil life after oil change.
4. Reset throttle sensor. To use a car decoder to initiate the throttle actuator so that the learning value of the ECU returns to its initial state.
5. Coding of injectors. After replacing the ECU or injector, the injector code for each cylinder must be confirmed or re-encoded so that the cylinder can better identify the injectors for accurate fuel injection control.
6. Reset SAS. It helps to clean faulty steering angle sensor memory and reset the steering angle, playing an important role in the calibration of the steering angle sensor.
7. Resetting brake pads. To deactivate and activate brake systems, help control brake fluid, open and close brake pads, and set brakes after replacing discs or pads.
8. Transmission learning. Perform transmission learning for the car when the ECU engine controller, crankshaft position sensor or crankshaft flywheel is replaced.
9. Support IMMO. To prevent unauthorized use of the car by the keys, perform the function of matching the anti-theft keys so that the immobilizer system in the car identifies and authorizes the remote control keys for normal use of the car.
10. Battery fit. It allows you to perform a reset operation of the battery monitoring unit, as a result of which the original information about the low state of charge of the battery will be removed.
11. Regeneration of DPF. It is used to remove PM (particulate matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel particulate filter system with DPF.
12. EGR adoption. This function is used to teach the EGR (Exhaust Gas Recirculation) valve after it has been cleaned or replaced.
13. Suspension adjustment. When the body height sensor in the air suspension system, the control module or when the vehicle level is incorrect is replaced, this function can adjust the body height sensor for level calibration.
14. Resetting the NOx sensor. If the NOx fault is reinitiated and the NOx catalyst is replaced, reset the catalyst learning value stored in the ECU engine driver.
15. Reset tires. This function is used to set the size parameters of the modified or replaced tire.
16. Calibration of glass. This feature allows you to adjust the door panes to restore the initial ECU memory.
17. Reset Start-Stop function. This function allows you to open or close the automatic Start/Stop function by setting the hidden function in the ECU (provided that the vehicle is equipped with a hidden function and hardware operation)
18. Initialization of air conditioning. The initialisation of the air conditioning system must be carried out when the air conditioning ECU is replaced or when the ECU memory is lost.
19. Reset AdBlue. After replacing or replenishing the diesel exhaust cleaner (car urea), an AdBlue reset operation is required.
20. Reset AFS. This feature allows you to initiate a system of adaptive headlights.
21. Reset the air/fuel ratio (A/F). This function is used to set or learn the parameters of the air/fuel ratio.
22. Reset the gearbox. This feature allows you to complete the self-learning of the gearbox to improve the quality of the gear shift.
23. Cooler venting. Use this feature to activate the electronic water pump before venting the cooling system.
24. Reset transport mode. To reduce the energy consumption of the vehicle, the user can perform the following operations: limiting the speed of the vehicle, not excitating the network when opening the door and turning off the remote key, etc. In this case, it is necessary to deactivate the transport mode to restore the normal operation of the vehicle.
25. Calibration of seats. This feature is used to match seats with a memory function that have been replaced or repaired.
26. Detection of high-voltage batteries. This feature is used to diagnose high-voltage batteries and detect information about their condition.
27. Initialization of sliding roofs. This feature allows you to set sliding roofs: unlocking, closing in case of rain, sliding / tilting the roof, temperature threshold outside the vehicle, etc.
28. Monitoring the balance of engine power. This function is used to monitor the acceleration of the crankshaft during the working stroke of each cylinder to determine the relative power provided by each cylinder.
29. Change of language. This function is used to change the language of the vehicle central console system. Note: You need a language pack to change the language.
30. Regeneration of petrol particulate filter (GPF). This feature is used to perform GPF regeneration or replacement when fuel consumption increases and engine power decreases as a result of long-term GPF use.
31. Reset the intelligent speed control system. This function is used to match the intelligent speed control module after its replacement or repair.

The set includes:

1. Diagnoscope LAUNCH CRP919E BT in tester after first registration will be automatically unlocked 2 years update
2. Wireless head: DBScar VII VCI
3. Suitcase with compartments
4. Diagnostic cable for diagnostic head
5. USB-C cable
6. Charger plus adapters
7. User manual
8. Quick start instructions.

You buy equipment from the Authorized Distribution of the LAUNCH brand in Polish!

2 years of free updates. After the update access is complete, the tester continues to work.

LAUNCH CRP919E BT supports single-key I/M checking and generation of a single-click vehicle condition diagnostic report

Auto VIN Scan - Professional quick identification of VIN number:

Instead of manually entering VIN codes one by one to read vehicle information, this CRP919E BT diagnostic scanner is equipped with advanced Auto VIN features that allow you to start scanning the VIN in your car control unit with a single click, in this case you can directly access the vehicle diagnostic screen to complete the diagnostic work.

Single-vehicle I/M checking:

Supports single-key I/M checking for all available emission systems. Facilitates the passing of the exhaust emission test.

Generating a diagnostic report on the condition of the vehicle:

With the Launch CRP919E BT you can generate a vehicle diagnostic report with ONE CLICK. The vehicle status report will scan all vehicle modules and give you a list of the status of each module. Also known as "Global Test" or "Full Scan". You no longer have to worry about potential problems in your car.

The tester supports virtually all control modules with which the diagnosed vehicle is equipped:

• engine
• ABS braking system
• airbags
• automatic transmission
• comfort module
• brake electronics
• ESP/ASR/EBD traction control
• TMPS tyre pressure system
• air conditioning
• power steering
• dashboard
• navigation
• audio system
• central lock
• anti-burglary system
• light electronics
• 4x4 drive
• memory of armchairs
• door electronics
• navigation
• Parking assistance
• Lane maintenance assistant
• reversing camera
• cruise control
• and many other systems depending on the vehicle

LAUNCH CRP919E BT supports in-depth car diagnostics with live graphical data graph, recording, playback and sharing.

Live graphical data stream: provides highly detailed data stream data, may include changes in the accelerator pedal position sensor, actual output shaft speed, A clutch motor, vehicle battery, etc. Graphical data allows for clearer and easier analysis of data changes in each module, making it easier to see problems.

Recording a live data stream: allows you to record a live data stream and view data from a specific point in a targeted manner. This allows you to view the data more clearly.

Live data stream playback: after recording the data for some time, if you want to view and analyze the data just recorded, you need to use the data stream playback function, which will help you in this. You can view the data at any time during the recording. Then you can select "Link", "Report" and "Record".

Live data stream sharing: will allow you to share any state of data and content you want to view, anytime, anywhere. You can send them to your friend or mechanic to help you solve complex problems.

Without a doubt, this is the super smart scanning tool you always need!!!

Specifications