Diagnostikos įrenginys Opel T2+ OBD2, ASO 96-04

Trumpai apie prekę

Prekė: Diagnostikos įrenginys Opel T2+ OBD2, ASO 96-04. Kategorija: Diagnostikos testeriai ir sąsajos.

• Gamintojas: GERANTZ Technik
• Modelis: 1aeLXOBDOPEL

The product comes from the official distribution of the GERANTZ Technik brand in Poland

Completely in Polish

(instructions, locations of diagnostic connectors in individual cars, diagnostic advice, including: deletion of service and oil inspection controls, error codes. ) and our proprietary program: Device Installation and Configuration Assistant version 2.47, with Click&Easy™

Diagnostic interface Opel T2+ with manual multiplexer, dedicated to Opel vehicles from 1996-2004. It enables quick connection to car systems, allowing immediate diagnostics of engine technical condition, ABS systems, airbags (AIR-BAG) and all other electronic equipment modules. An indispensable tool for locating faults and checking the correct operation of key vehicle systems.

Thanks to this interface, it is possible to comprehensively operate all electronic systems of the vehicle. It allows you to test actuators and carry out adaptations, which is necessary after engine repairs or disconnection of the battery.

Using this interface allows you to diagnose faults yourself, which not only saves time, but also money. A self-identified fault often turns out to be easy to remove, which could involve high costs on the site. With this device, you can perform diagnostics at a level comparable to professional services, while avoiding unnecessary expenses.

The diagnostic interface allows you to read and delete fault codes, delete service controls, as well as inspections and preview operating parameters (so-called. LiveData) in the following modules:

• ABS 415 / 430 / 2E / 2SE (+TC) / 5 / 5 (+TC) / 5.3 / 5.4 (+TC) / 6
• Airbag / AC4 / S / SAB6
• Alarm
• Central Castle
• Additional heating
• Electronic window lifters
• Electronic mirror control
• Electronic sunroof
• ESP
• GPS System
• Immobiliser
• Immobiliser II
• Electronic air conditioning
• On-board computer
• MID On-Board Computer
• Traction Control (TC)
• Counter
• Ascension Control Module
• Engine cooling module
• Abandoned roof
• PAS (Parkpilot)
• Heating / Memory of seats
• Radio 420 / 435 / 520 / 620 / 635 / 635J / 2020 / 2620
• Radio CAR 300 / 400 / 500 / 600 / 800 / 2004
• Radio CART 700 / 2007
• Radio CCR 2006
• Radio CCRT 2008
• Radio CDR 2005
• Radio NCDR 1100 / 1500 / 2011 / 2013 / 2015
• Transmission (AT)
• Engine
• Headlamp levelling system
• Cruise control
• Electronic assistance
• TID three-function display
• CART/CCRT Display
• Graphic-color display
• GID/CID display
• Air suspension
• CD changer

The Opel T2+ interface has minimum hardware requirements:

• processor: Pentium 133 MHz
• memory: 8 MB
• free disk space: 5 MB
• USB port: 1
• operating system: Windows 95 / 98 / 98 SE / ME / 2000 / XP / Vista / 7 (32 and 64-bit) / 8 (32 and 64-bit) / 8.1 / 10 (32 and 64-bit) / 11 (32 and 64-bit) / Linux

SAFETY - the interface has a number of protections to protect electronics and stabilize the connection:

• galvanic separation of systems - protects electronics and eliminates interference
• overvoltage protection
• overload protection
• protection against reverse connection

Additional information:

• Producer: GERANTZ Technik
• Manufacturer part number: GT1080c.2
• Free technical support: 2 years
• Free updates: 2 years

Using the diagnostic interface is extremely simple. On the one hand, the device is connected to the diagnostic connector in the car, and on the other hand to any PC equipped with a USB connector (the first time you connect to the computer, you need to install the drivers provided on the CD). After proper connection, turn on the ignition, then start the appropriate diagnostic program.

DEVICE INSTALLATION - Click&Easy™ TECHNOLOGY

We were the only ones to develop a special installation program "Device Installation and Configuration Assistant" (now in the new version 2.47 - Click&Easy™). Simply insert the disc into the drive and our proprietary installation program will appear after automatic start-up.

Steps 1, 2 and 3 (following the assistant’s instructions) should now be followed accordingly to seamlessly navigate through the device installation and configuration process (in case of problems, quick assistance is available with every step within a single click).

Click&Easy™ TECHNOLOGY - you no longer have to be a computer engineer with higher education to learn the secrets of automotive diagnostics. Now you only need to know the basics of computer operation, and our Assistant will guide you step-by-step through the process of installing and configuring the device in the system, as well as help you with the first, own diagnostics of the vehicle.

WE ANNOUNCE THE END OF TEDIOUS INSTRUCTIONAL STUDY!!!

The most popular program that works with the interface is Opel TECH2 . In addition, the interface also works with programs:

• AB-COM
• GM Tool and similar

(does not work with OP-COM)

After starting the program, we choose the module with which we want to connect (it can be the engine controller, abs, air-bag, immobiliser or any other of the dozens available). When we choose the right module, we wait for the driver to come forward.

Choosing the "Diagnostics" option, a window will appear with the choice of the year of the car we want to diagnose, then we will be asked to choose the model and driver with which we want to connect. The drawings show an example of the choice of Air-Bag driver for the Opel Astra G - 2000.

Once we have selected the driver we are interested in, we will be asked to switch the data line pin to the appropriate contact (in the example - no. 12). In this case, it will be necessary to use an additional cable included in the set (so-called. manual Multiplexer).

After switching to the appropriate contact in the diagnostic connector and clicking "Next", the program will automatically establish a connection with the selected driver and read any fault codes.

In this simple way, you can check every Opel car produced in 1996-2004. Just get in the car, turn on the program and do a test drive by observing the current operating parameters.

... as the only company on the market we offer free, professional technical support. Do you have a problem with driver installation, program operation, diagnostic connector location? - our consultants will answer any question you ask.

This product does not need to be advertised. Are you still hesitating? The cost of connecting a car to a computer by a specialist is approximately PLN 100 (or even PLN 200 at an authorized service center). All you have to do is diagnose the car to yourself and your neighbor, and the interface will pay off.

SELF-DIAGNOSIS IN THE CAR FOR AN INEXPERIENCED USER WILL NOT EXCEED 5-10 MINUTES!!!

• GERANTZ Technik - a well-known and respected brand on the Polish market. Thanks to the fact that we have become its official distributor, we are able to offer high quality products at a very affordable price.
• Components of the highest quality - only components of the highest quality, only well-known manufacturers, were used for production, which ensures stable and trouble-free operation of the device.
• CE, FC, RoHS certificates - the product meets strict CE, FC and RoHS standards, which makes it completely safe for the user. At the same time, we warn against numerous Chinese counterfeits that do not meet the requirements of technical standards.
• 2 years of free updates - full, free product support for a period of 24 months.
• Free, professional technical support - the product is covered by the "On-Line Technical Support Center" program.

Nothing is lost! You can download the compactness of the disc from our servers On-Line Help Center.

This product is covered by the "On-Line Support Center" program. As the only company in the industry we have launched an innovative support system.

Includes m.in.: user manuals, tips, downloadable discs, or answers to frequently asked questions. You can also use the help of a dedicated consultant.

• Diagnostic interface OPEL T2+ USB (wire length: 130cm)
• Adapter (manual multiplexer)
• CD containing:

- our proprietary program "Device Installation and Configuration Assistant" version 2.47 (Click&Easy™)

- program testing the interface and its correct installation

- latest drivers (drivers)

- User manual (installation, configuration, work with the device)

- full list of fault codes (938 described errors)

- Diagnostic advice

- 55-page guide to deleting the need for service inspection in most European cars

• Written warranty card
• Certificate of authenticity GERANTZ Technik
• Technical support for the purchased device
• Available colors: red-blue or blue

SET IN FULL, POLISH LANGUAGE VERSION!!!

Opel

• Agila - 1.0 / 1.2 / 1.3D CDTi ----------> 2000-04
• Arena - 1.9D / 2.5D ----------> 1998-00
• Astra-F - 1.4 / 1.6 / 1.8 / 2.0 ----------> 1996-02
• Astra-G - 1.2 / 1.4 / 1.6 / 1.7 DT / 1.7 DTL / 1.8 / 2.0 / 2.0 DTH / 2.0 DTL / 2.0 Turbo / 2.2 / 2.2 DTR ----------> 1998-04
• Calibra - 2.0 / 2.5 ----------> 1997
• Campo - 2.5D ----------> 2001-02
• Corsa-B - 1.0 / 1.2 / 1.4 / 1.6 ---------> 1996-01
• Corsa-C - 1.0 / 1.2 / 1.3 DT / 1.4 / 1.6 / 1.7 DT / 1.7 DTH / 1.7 DTL / 1.8 ----------> 2001-04
• Frontera - 2.0 / 2.2 / 2.5 TDS ----------> 1997-98
• Frontera-B - 2.2 / 2.2 DTH ----------> 1999-03
• Meriva - 1.6 / 1.7 DT / 1.7 DTH / 1.8 ----------> 2003-04
• Monterey - 3.0 / 3.5 ----------> 1997-98
• Movano - 1.9D DTI / 2.2D DTI / 2.5D / 2.8D Turbo / 3.0D CDTi ----------> 1999-04
• Omega-B - 2.0 / 2.0 DTH / 2.2 / 2.5 / 2.5 TDS / 2.6 / 3.0 / 3.2 ----------> 1996-03
• Sintra - 2.2 / 2.2 DTH / 3.0 ----------> 1997-99
• Speedster/VX220 - 2.0 Turbo / 2.2 ----------> 2001-04
• Tigra - 1.4 / 1.6 ---------->1997-00
• Vectra-B - 1.6 / 1.8 / 2.0 / 2.0 DTH / 2.0 DTL / 2.2 / 2.2 DTR / 2.5 / 2.6 ----------> 1996-01
• Vivaro - 1.9 DTI / 2.0 / 2.5 CDTi ----------> 2001-04
• Zafira - 1.6 / 1.8 / 2.0 DTL / 2.0 Turbo / 2.2 / 2.2 DTR ----------> 2000-04

• User manuals, installation software and all types of guides belong to our company and are an integral part of the offered product (they cannot be purchased separately).
• All trademarks and company names posted on this website belong to their respective owners. Trademarks or trade names are used for informational purposes only, the product is a replacement part.
• Diagnostic software is free under GNU/GPL or OpenSource license, not included in the price of the product. Due to very frequent updates of such programs, it is recommended to download individual programs directly from the websites of manufacturers and/or their distributors.
• Interface functions may be limited for some models due to the capabilities of the vehicle program or equipment used.
• The use of certain functions of the offered device or available software, due to advanced capabilities, may require additional technical knowledge about the operation of the vehicle's electronic systems. It is recommended to familiarize yourself with it before using the purchased equipment.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With invoice (excluding VAT)
Parametry	Brand	GERANTZ Technik
Parametry	EAN (GTIN)	5905931215590
Parametry	Manufacturer code	1aeLXOBDOPEL