Dažų storio matuoklis automobiliams, aliuminio dangų jutiklis, 1–1800 µm

Trumpai apie prekę

Prekė: Dažų storio matuoklis automobiliams, aliuminio dangų jutiklis, 1–1800 µm. Kategorija: Dažų storio matuokliai.

• Gamintojas: Wintact
• Modelis: WT2110

⭐⭐⭐⭐⭐

Measurement range: 0 - 1500 μm (0 - 1,5 mm)

Coating thickness meter with high resolution color and rotating display and measurement memory and charts.

Professional device for fast and accurate measurement of the thickness of the non-magnetic coating on the surface of the metal magnetic substrate and the non-metallic coating on the non-magnetic metal substrate. The product is widely used in the chemical industry, metallurgy, quality control of goods, especially in the automotive and many other fields. The meter is equipped with a high-resolution (HD) color display.

⭐⭐⭐⭐⭐

• Color HD display.
• Measurement of thickness of non-magnetic coatings (lacquer, paint, zinc. . ) on metallic substrates (e.g. steel)
• Measurement of the thickness of a non-metallic coating on a non-magnetic metal substrate (e.g. aluminium)
• Two measurement methods: single and continuous.
• Three calibration methods: basic (basic), offset (shift calibration), zero calibration (zero).
• Measurement in metric and imperial units.
• Data storage.
• Rotating display (auto-rotation horizontally and vertically),
• Charging the batteries with the included AC adapter.
• Backlit screen.
• Automatic shutdown (Set by default to 2 minutes after the last operational action in the interface).

⭐⭐⭐⭐⭐

• DIF :Difference in value from previous measurement.
• AVG: Average value
• MAX: Maximum value
• MIN: Minimum value
• HIGH: Upper limit
• LOW: Lower limit
• SDEV: Standard deviation
• CV%: Coefficient of variation

• The interface shows 12 previous measurements.
• The bar chart shows the proportions of the measured value relative to the set measurement range.
• The bar chart shows the lower and upper limits.
• The measurement, the value of which is within the set range, will create a green graphic on the chart.
• A measurement whose value does not fall within a set range will create a red graphic on the chart.

⭐⭐⭐⭐⭐

Measurement of thickness on the substrate:

• ferromagnetic (e.g. steel, iron): YES✅
• nonferromagnetic (e.g. aluminium): YES✅

Other:

• Measurement range: 0 - 1500 μm (0 - 1,5 mm)
• Error margin: 0.1μm (< 100μm) / 1μm (≥100μm)
• Minimum diameter of the measured object: 12 mm
• Minimum thickness of metal substrate: 0,5 mm
• Minimum radius of curvature for magnetic convex substrate: 2mm
• Minimum radius of curvature for magnetic concave substrate: 11mm
• Minimum diameter of non-magnetic metal substrate: 50mm
• Minimum thickness of non-magnetic metal substrate: 0.5mm
• Power Supply: 1000mAh rechargeable battery via included USB-C cable
• Dimensions: 70,6 x 38,6 x 149,49 mm
• Weight: 139 gr (including batteries)

✅ THE SCREEN ROTATES DEPENDING ON THE POSITION OF THE DEVICE. THANKS TO THIS, THE OPERATION OF THE DEVICE BECOMES EVEN MORE CONVENIENT.

⭐⭐⭐⭐⭐

⭐⭐⭐⭐⭐

• thickness gauge WT2110,
• calibration plates and metal plates,
• AC adapter,
• usb cable,
• leash,
• suitcase,
• outer packaging,
• instruction manual in Polish.

SCREEN 1 and SCREEN 2: show data saving and cleaning, Lock Data is responsible for displaying the last 100 results, Save Data will allow you to save them, and Clear Data cleaning.

SCREEN 3: A data icon is displayed at the bottom of the histogram. Set alarm values located in its central part. Columns of data outside the limit range are displayed in red. e.The black line at the top of the histogram determines its scope for current data.

SCREEN 1 - Measured values:

• a. The top bar shows the function description and battery level.
• b. The measurement value is displayed in yellow
• c. “Num”: The order number of the measurement.
• d. “SNG” is an indication of the current measurement mode (SNG - single measurement, CTN - continuous measurement).
• e. “Fe” is the designation of the measured magnetic substrate, “nFe” of the non-magnetic substrate.
• f. The green icon on the right is the measurement unit.

SCREEN 2 - Values and chart:

• a. The graph at the bottom of the screen shows the trend for the last 20 measurement records.
• b. Upper and lower limit values of the graph.

SCREEN 3 - Measured values and statistics:

• a. Dif: The difference in value from the previous measurement.
• b. Avg: Average value
• c. Max: Maximum value
• d. Min: Minimum value
• e. High: Upper limit
• f. Low: Lower limit
• g. Sdev: Standard deviation
• h. CV%: Coefficient of variation

SCREENS: 1, 2, 3 - Measured value and preview of previous measurements:

• The interface shows 12 previous measurements.
• The bar chart shows the proportions of the measured value relative to the set measurement range.
• The bar chart shows the lower and upper limits.
• The measurement, the value of which is within the set range, will create a green graphic on the chart.
• A measurement whose value does not fall within a set range will create a red graphic on the chart.

BENETECH is a manufacturer of advanced measuring and control equipment. A specialized supplier of professional digital measuring tools, as well as other electronic devices.

BENETECH POLAND is an authorized and direct distributor of this brand in Poland and Europe.

In the brand catalog you will find m.in:

• pyrometers and thermal imaging cameras,
• anemometers (wind meters),
• humidity meters and hygrometers,
• detectors and meters of gases and air quality,
• sonometers (decibel meters) and lux meters (light meters),
• laser rangefinders and tachometers,
• thermometers and pressure gauges,
• thickness and vibration meters (vibrometers),
• tools for electricians and cable detectors,
• electromagnetic radiation meter,
• home and industrial electronics equipment.

Directive EMC 2014/30/EU and RoHS 2011/65/EU

The product meets European standards and directives, as evidenced by the CE certificate, at the customer's request we send this document.

The Declaration of Conformity (CE) is a free, optional document and therefore is not sold in this offer.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Wintact
Parametry	Product weight with unit packaging	0.14 kg
Parametry	EAN (GTIN)	5903738810550
Parametry	Model	WT2110
Parametry	Measuring range	0–1800 μm
Parametry	Probe type	built-in
Parametry	Read-out history	yes
Parametry	Manufacturer code	WT2110
Parametry	Batteries included	yes
Parametry	Additional information	automatic shutdown,illuminated display,case