Daugiafunkcinė vandens paruošimo stotis Ecomix A 37L Clack CI 10×54″

Trumpai apie prekę

Prekė: Daugiafunkcinė vandens paruošimo stotis Ecomix A 37L Clack CI 10×54″. Kategorija: Filtrai ir vandens minkštikliai.

• Gamintojas: no brand
• Modelis: Mutli C CI 37
• Talpa: 37 l

⭐ ECOMIX A 37L CLACK WS1 CI MULTIFUNCTION STATION

✅ Multifunctional water treatment plant Ecomix A 37L is an automatic system designed for comprehensive improvement of water parameters in domestic, utility and small service facilities.

✅ The device uses 37 liters of Ecomix A multifunctional bed, which in one system is responsible for softening water and reducing iron, manganese and organic compounds.

⭐ The most important advantages of the station

✅ 37 liters of Ecomix A deposit – a multifunctional medium designed for comprehensive water treatment.

✅ Water softening – reduction of calcium and magnesium ions helps reduce the formation of boiler stone.

✅ Iron reduction – helps to reduce yellow and brown discoloration and deposits appearing on fittings and ceramics.

✅ Reduction of manganese – reduces the formation of dark deposits and improves the performance of water.

✅ Restriction of organic compounds – one of the functions of the multilayer deposit Ecomix A.

✅ Improvement of clarity, colour and taste of water – the system works comprehensively on the most common quality problems.

✅ Automatic Clack head WS1 CI – controls the operation of the device and the regeneration process.

✅ Volume-time control – regeneration can be started after treatment of a certain amount of water or according to the set time.

✅ 70 L brine tank – provides the right amount of regenerative solution for the deposit.

✅ Service bypass included – allows you to quickly disconnect the device from the installation during service work.

✅ Pressure cylinder 10x54″ – adapted to the use of 37 liters of Ecomix A deposit.

✅ Device delivered backfilled and configured – prepared to perform the installation after proper selection of operating parameters.

⭐ Ecomix A multifunctional bed

✔ The heart of the device is 37 liters of Ecomix A deposit, which combines several specialized filter layers.

✔ The individual components of the deposit are responsible for removing different groups of contaminants, so the system can carry out several treatment processes at the same time.

✔ The deposit reduces ions of calcium and magnesium, which are responsible for water hardness and the formation of boiler stone.

✔ At the same time, it helps to reduce the content of iron and manganese, which can cause discoloration, deposits and metallic taste of water.

✔ Ecomix A is also responsible for limiting organic compounds present in water.

✔ The multifunctional design of the bed allows you to use one column instead of several independent filtration devices.

✔ After the working capacity is exhausted, the deposit is automatically regenerated using a brine solution.

⭐ Effective water softening

✔ Hard water contains an increased amount of calcium and magnesium ions.

✔ Their presence can lead to the formation of stone on installation elements, fittings, heaters and water-using devices.

✔ Ecomix A reduces water hardness through the ion exchange process.

✔ Hardness reduction helps to reduce the amount of deposits formed, among others, in boilers, washing machines, dishwashers, coffee machines and heating systems.

✔ Soft water also facilitates foaming of detergents, thanks to which it is possible to reduce their consumption during everyday use.

⭐ Reduction of iron and manganese

✔ Elevated iron content may cause yellow or brown water coloration, metallic aftertaste and rusty deposits.

✔ Sediments may appear on faucets, sinks, bathtubs, shower cabins, sanitary ceramics and inside the installation.

✔ Manganese may be responsible for dark discoloration and deposits and deterioration of water performance.

✔ The multifunctional Ecomix A bed allows you to reduce hardness, iron and manganese at the same time.

✔ The condition for proper operation in the field of iron reduction is its occurrence in the dissolved, non-precipitated form.

⭐ Automatic Clack head WS1 CI

✔ The station is equipped with an automatic Clack WS1 CI control head.

✔ The controller works in the volume-time system.

✔ The head controls the amount of treated water and on this basis can automatically start the regeneration of the deposit.

✔ The system also allows regeneration after a certain period of time.

✔ Thanks to automatic operation, the user does not have to manually start individual regeneration cycles.

✔ The head has an readable display and intuitive programming menu.

✔ The system also retains settings in case of power failure.

✔ The set includes a service bypass, allowing you to disconnect the device or direct water bypassing the station.

✔ The head works with 1″ angular connections.

⭐ Automatic regeneration of deposits

✔ During operation, the deposit gradually retains substances removed from the water and loses its working capacity.

✔ After treating a certain amount of water, the device automatically starts the recovery process.

✔ For regeneration, a solution prepared in a brine tank is used.

✔ Approximate salt consumption during one regeneration cycle is approximately 3,8 kg.

✔ Approximate water consumption during one regeneration cycle is approximately 220 – 240 litres.

✔ Rinses formed during regeneration must be discharged into the sewage system.

✔ The appropriate setting of the regeneration frequency depends on the water parameters, its consumption and the required quality at the output.

⭐ Brine tank 70 L

✔ The set includes a brine tank with a capacity of 70 liters.

✔ The tank is used to prepare the solution needed for the regeneration of the Ecomix A deposit.

✔ Adequate capacity limits the frequency of salt replenishment.

✔ The user should periodically check the salt level and replenish it according to the needs of the device.

✔ The process of regeneration and collection of brine is carried out automatically by the control head.

⭐ Application of multifunction station

✔ Single-family houses – comprehensive treatment of water used throughout the building.

✔ Apartments and segments – the possibility of central limitation of hardness and selected impurities.

✔ Well water – especially in the case of simultaneous occurrence of hardness, dissolved iron and manganese.

✔ Pensions and accommodation facilities – protection of installations and equipment with higher water consumption.

✔ Restaurants and catering facilities – reduction of scale and sediments in installations and equipment.

✔ Boilers and heating systems – preparation of water with limited hardness.

✔ Small industrial installations – applications requiring more stable water parameters.

⭐ Scheme of correct installation

✔ The station is mounted on the main cold water connection.

✔ Before the device, it is recommended to use an appropriate pre-filter, which limits the entry of larger mechanical impurities into the head and bed.

✔ The device requires access to sewage, to which rinses formed during regeneration are discharged.

✔ It is also necessary to connect the device to the power supply 230 V / 50 Hz.

✔ Built-in bypass allows you to direct water bypassing the device during service work.

✔ The system should be set according to the results of water analysis and actual consumption.

⭐ Complete set prepared for assembly

✔ The device is delivered as a flooded and configured set.

✔ The set includes a pressure cylinder 10x54″.

✔ The column contains 37 litres of Ecomix A multifunctional bed.

✔ The system is equipped with an automatic Clack WS1 CI head.

✔ The set includes a 70 L brine tank.

✔ The head is equipped with service bypass.

✔ angle connections 1″ were used.

✔ The device is sent on a half-pallet.

⭐ Technical specification

✔ Type: automatic multifunctional water treatment plant

✔ Deposit: Ecomix A

✔ Bed volume: 37 L

✔ Pressure cylinder: 10x54″

✔ Control head: Clack WS1 CI

✔ Control: volume-time

✔ Connections: 1″ angular

✔ Bypass: included

✔ Brine tank: 70 L

✔ Approximate salt consumption for regeneration: about 3,8 kg

✔ Approximate water consumption for regeneration: approximately 220 – 240 L

✔ Operating temperature: 2 – 38°C

✔ Operating pressure: 1,4 – 8,6 bar

✔ Power supply: 230 V / 50 Hz

✔ Power consumption: about 20 W

✔ Driver menu: English

✔ Reduced parameters: hardness, iron, manganese and organic compounds

✔ Regeneration: automatic with brine

⭐ FAQ – Frequently Asked Questions

❓ What is Ecomix A 37L for?

✅ The device is designed for comprehensive water treatment. At the same time, it reduces hardness, iron, manganese and organic compounds.

❓ What deposit is in the device?

✅ The station contains 37 liters of Ecomix A multifunctional deposit, consisting of several layers responsible for various treatment processes.

❓ Does the device soften water?

✅ Yes. Ecomix A reduces calcium and magnesium ions responsible for water hardness and boiler stone formation.

❓ Does the device remove iron and manganese?

✅ The deposit allows the reduction of iron and manganese. In the case of iron, it is important that it occurs in dissolved, unprecipitated water.

❓ Does the station require salt?

✅ Yes. The Ecomix A deposit is regenerated using a solution of brine prepared in a 70 L tank.

❓ How much salt does one regeneration consume?

✅ Approximate consumption is approximately 3,8 kg of salt per regeneration cycle.

❓ How much water is used during regeneration?

✅ Approximate consumption is approximately 220 to 240 litres of water per cycle.

❓ Does regeneration need to be started manually?

✅ No. The Clack WS1 CI head automatically controls the system operation and starts regeneration according to the set parameters.

❓ Does the device have bypass?

✅ Yes. The set includes a service bypass, which allows you to disconnect the station from the installation or direct water bypassing the device.

❓ Do I need a water test before buying?

✅ Yes. Water analysis is very important because it allows you to correctly select the configuration of the device and assess whether the Ecomix A deposit will be suitable for the existing parameters.

❓ Where is the station installed?

✅ The device is mounted on the main cold water connection, with access to sewerage and electrical power supply.

Specifications