Belaidis Wi-Fi stiprintuvas 300 Mb/s, 2.4 GHz, WPS, RJ-45, 100 m

Trumpai apie prekę

Prekė: Belaidis Wi-Fi stiprintuvas 300 Mb/s, 2.4 GHz, WPS, RJ-45, 100 m. Kategorija: WiFi maršrutizatoriai ir prieigos taškai.

• Gamintojas: Prolech
• Modelis: RP-2 WIFI
• Plotis: 10 mm
• Aukštis: 20 mm

Ensure a stable and fast connection throughout your home or office. The RP-2 BLOW extends the wireless range to 100 m, supports up to 10 users simultaneously and offers transmission speeds of up to 300 Mb/s. With 6 antennas, Repeater/AP operating modes and WPA/WPA2 security, you can be sure of reliable network operation and security.

✅The most important features of the product:

• Fast data transmission – speeds up to 300 Mbps in IEEE 802.11 b/g/n standard.
• Stable Wi-Fi connection – frequency 2,4 GHz and up to 6 antennas for a strong signal.
• Secure network – support for WEP, WPA/WPA2 and WPS (64/128 bit).
• Multi-user support – connect up to 10 devices simultaneously.
• Large range – up to 100 m (depending on environmental conditions).
• Functionality – Repeater and AP operating modes in one device.
• Easy installation – simple Plug & Play setup, no additional drivers required.
• RJ45 port + Cat5E cable – possibility of connecting wired equipment.
• Universal power supply – AC 110 – 240V 50/60Hz, energy-saving operation.

✅ What makes our signal amplifier so great?

• Powerful and stable signal – up to 6 antennas and speeds up to 300 Mb/s.
• Comprehensive operation – Repeater and AP modes + support for up to 10 devices.
• Simple setup – quick Plug & Play installation, RJ45 port and Cat5E cable included.

✅Enhance your network signal

Are you tired of poor Wi-Fi coverage? The BLOW RP-2 signal amplifier with speeds up to 300 Mbps is a simple and effective solution that will extend the range of your wireless network. With it, you can enjoy a fast and stable connection in every corner of your home or office.

✅Practical, removable outlet

With its integrated and removable plug, the device can be easily adjusted to fit different locations in your home or office. Installation is extremely simple – just plug in the plug and change its position if necessary. This convenient solution allows you to set the repeater where the Wi-Fi signal needs amplification, without unnecessary cables and complicated installation.

✅Ethernet connection

The built-in RJ45 port in the BLOW RP-2 amplifier allows you to connect wired devices such as Smart TVs, game consoles or set-top boxes, and use the wireless network as a classic network card.

What’s more, the repeater can simultaneously share a Wi-Fi signal with other devices, extending the network coverage throughout your home or office.

✅Signal amplifier – operating modes:

⭐Repeater – extends Wi-Fi reception range, eliminating the need for cable.

⭐AP (Access Point) – when you connect the amplifier to the router with a LAN cable, you create an additional Wi-Fi access point, improving signal quality and transmission stability.

✅Banally simple installation – step by step

BLOW RP-2 Wi-Fi Repeater is designed so that everyone can start it in a few minutes – without specialized knowledge and without additional drivers. Just follow a few simple steps:

1. Connect the device to a power outlet and wait 1 to 2 minutes for a full startup.
2. Connect to the amplifier – use your smartphone, tablet or laptop by selecting the Wi-Fi repeater (SSID: XXXXX).
3. Go to browser and enter the address: 192.168.71.1 to open the configuration panel.
4. Log in with the default password and select the "Repeater Mode" mode.
5. Indicate your Wi-Fi network, enter its password and approve the configuration.
6. Ready! After a while, the repeater will start amplifying the signal, and you can use faster and more stable internet throughout your home.

❗ Starter password for device configuration: 12345678 ❗

✅ Specification

• Power supply: AC 110-240V 50/60Hz 0,3A
• Support up to 10 users at the same time
• Operating Modes: Repeater/AP
• Standards: IEEE 802.11 b/g/n
• Frequency: 2,4 GHz
• Security: WEP, WPA/WPA2, WPS (64/128 bit)
• Antenna: 6 antennas
• Data transmission: up to 300 Mbps
• Port: RJ45
• Cat5E Patch Cord
• Wireless range: up to 100m (depending on environmental conditions)

✅Contents of the set:

• repeater
• cable 40cm
• User Manual (PL)

CE and RoHS certified

BLOW brand products are CE and RoHS certified. These certificates confirm compliance with fully stringent European Union standards regarding, among others, health safety and environmental protection.

Specifications