Pristatymo terminas kiekvienai prekei nurodomas prie kainos bloko.
Pristatymas visoje Lietuvoje: nemokamas.
Trumpai apie prekę
Prekė: Belaidis Victron SMART 12V 13A lygintuvas. Kategorija: Baterijų įkrovikliai.
- Gamintojas: no brand
RECTIFIER CHARGER VICTRON SMART IP67 12V 13A
- Commercial No.: Blue Smart 12V 13A
- Voltage: 12V
- Charging voltage: 14.4V
- Charging current: 13A
- Min. battery voltage: 2V
- Supported capacities: 26-150Ah
- Maintenance: to 200Ah
- Sealing: IP67 (dipping resistance 1m and dust)
- Charging process: Fully automatic 4 - stage
- Supported technologies: Liquid electrolyte, Maintenance-free,CA/CA, EFB, AGM, GEL,
- Dimensions: 211 mm (Length) 85 mm (Width) 60 mm (Height)
- Included: Charger, M8 eye tip end
Fully enclosed Blue Power IP67 charger: waterproof, shockproof and ignition protected - Blue Power IP67 charger is resistant to damage due to water, oil or pollution. The housing was made of cast aluminum, and electronic systems were embedded in resin.
Four-stage adaptive loading algorithm
With an efficiency of up to 92%, Blue Power chargers emit four times less heat compared to competing devices. Additionally, when the battery is charged, power consumption drops due to a power drop of up to 0,5W, which is five to ten times better than competing devices.
Two LEDs indicating charging status and charger status
LED yellow (fast flashing): charging in BULK phase
LED yellow (slow flashing): charging in the absorption phase.
LED yellow (fixed): charging in FLOAT phase.
LED green: charger on
Completely protected: waterproof, shockproof and ignition protection
Water, oil, and sand cannot damage your Blue Power charger. The housing is cast from aluminum, and the electronics are flooded in resin.
Overheating protection
When the temperature reaches 60 °C, the output current is reduced while maintaining proper operation and thus protects the charger from damage.
Interruption of start-up
Models marked with the prefix (1+Si) include a second output with a current limitation, which is powered whenever the input voltage is connected. This function is useful for e.g. prevent the vehicle from starting before disconnecting the charger.
Reduced battery consumption with reduced operation: Storage mode
Storage mode is activated whenever the battery is not used for 24 hours. In this mode, the voltage is reduced to 13,2 V to minimize gassing and corrosion at the positive poles. Once a week, the voltage is raised to the absorption voltage to recharge the battery. This prevents electrolyte delamination and sulfurization - the main causes of premature battery consumption.
Victron products are characterized by several features that make them unique on the market:
- safe for people: easy to install, resistant to sparking and short circuit and reverse polarity, no need to remove the battery for charging.
- safe for vehicles: regulate charging parameters, so they do not pose a risk of damage to the electrical and electronic equipment of the vehicle
- fully automatic: the microcomputer controls the entire charging process, so that the user does not have to supervise anything or be an expert on batteries
- good for the battery: equipped with a unique desulphurisation function that allows you to restore the life of discharged batteries. The charging voltage and current are computer stabilized, which allows you to extend the battery life (the fluctuations in charging parameters are less than 2%, while in traditional rectifiers they reach up to 400%).
- efficient: the control system can charge the battery 100%, so there is no effect of gradual loss of capacity by the battery
- durable: adapted for outdoor use (IP65), work in temperatures -20 to +40 degrees Celsius.
- high-quality products: devices that work reliably for many years.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Brand | no brand |
| Parametry | Maximum amperage | 13 A |
| Parametry | EAN (GTIN) | 5907920522054 |
| Parametry | Batteries included | no |


