Pristatymo terminas kiekvienai prekei nurodomas prie kainos bloko.
Pristatymas visoje Lietuvoje: nemokamas.
Trumpai apie prekę
Prekė: Belaidis tinklo stiprintuvas AVM FRITZ! Repeater 2400. Kategorija: Wi-Fi signalo stiprintuvai.
- Gamintojas: FRITZ!Box
- Modelis: FRITZ!Repeater 2400
AVM FRITZ!Repeater 2400 is a high-performance Wi-Fi signal amplifier designed to extend the range of your home or office wireless network and create a smart Mesh network. With two standards, AC (2,4 GHz) and N (5 GHz) provide simultaneous data transmission: up to 1733 Mb/s in (5 GHz) and up to 600 Mb/s in (2,4 GHz). The device supports IEEE 802.11ac/n/g/a standards, which guarantees compatibility with most routers.
Thanks to the built-in gigabit LAN port, you can connect equipment without the Wi-Fi module or create a quick access point using your existing cable installation.
FRITZ!Repeater 2400 supports mesh technology – works with FRITZ! routers Box, creating a single network where devices are automatically switched between nodes to optimize coverage and performance.
When connected to the router, it automatically takes over the name and password of the existing network, which enables smooth and unnoticeable switching between access points. use devices without a Wi-Fi module or provide them with access to high-bandwidth networks.
What is Mesh Network?
Mesh network is a modern solution that allows you to create a single, uniform wireless network consisting of several cooperating devices (router and repeaters). This allows all connected devices, such as smartphones, laptops or TVs, to automatically connect to the nearest access point, ensuring the best possible range and stable connection.
Key features of Mesh network:
- One network for the whole house – no need to manually switch between different Wi-Fi networks.
- Automatic motion management – devices are intelligently switched between nodes depending on signal strength and load.
- Easy range extension – just add more Mesh points to cover larger areas.
- Stable and fast connection – Mesh technology minimizes interference and signal loss, even with a large number of connected devices.
Mesh networking is ideal for homes and apartments where a standard router does not provide full Wi-Fi coverage.
FRITZ!Repeater 2400 is a powerful Wi-Fi Mesh Dual Band signal amplifier with speeds up to 2400 Mb/s, ensuring stable network coverage throughout the house, intelligent traffic management and full compatibility with FRITZ!Box routers and the Wi-Fi 5 standard.
To ensure high signal intensity throughout your home and garden, install the FRITZ!Repeater amplifier.
Key features:
- Wi-Fi Signal Amplifier
- Support AC (up to 1733 Mbps) and N (up to 600 Mbps) WLAN standards
- Cross Band Repeating technology for efficient use of both bands
Cross Band Repeating technology enables intelligent switching between bands, allowing the repeater to work at peak performance, offering a fast and stable connection.
The integrated Gigabit LAN port allows you to connect your computer, console, or other network devices that require wired internet access.
The automatic channel selection feature ensures that your device always uses the most optimal frequency, ensuring the best transmission quality.
Why you should buy:
- Increase Wi-Fi coverage throughout your home
- Use wireless and wired devices with LAN port
- You will benefit from Mesh networking and automated device management
- Save energy with low power consumption
Specification:
- Wi-Fi bands: 2,4 GHz + 5 GHz
- Transmission speed: up to 1733 Mbps (5 GHz) + 600 Mbps (2,4 GHz)
- Wi-Fi Standards: IEEE 802.11ac/n/g/a/b
- LAN port: 1 × Gigabit Ethernet (10/100/1000 Mbps)
- Encryption: WPA2, WPA3/2 Transition mode
- Configuration: WPS button, browser interface
- Power supply: 230 V, 50 Hz
- Dimensions: 76,5 × 155 × 62,6 mm; weight approximately 160 g
- Power consumption: average 4,1 W, maximum 8,5 W
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Manufacturer | FRITZ!Box |
| Parametry | Model | FRITZ!Repeater 2400 |
| Parametry | Antenna | built-in |
| Parametry | Number of LAN ports | 1 |
| Parametry | Product weight with unit packaging | 0.4 kg |
| Parametry | EAN (GTIN) | 4023125028557 |
| Parametry | Manufacturer code | 2400 |
| Parametry | Certificates of conformity | CE |
| Parametry | Batteries included | no |
| Parametry | Wireless operation standard | 802.11ac (Wi-Fi 5),802.11n (Wi-Fi 4),802.11g,802.11b,802.11a |
| Parametry | Band | 2,4 GHz,5 GHz |


