Belaidis rankinis pjūklas medžiui NAC SMART 165mm 20V be akumuliatoriaus

Trumpai apie prekę

Prekė: Belaidis rankinis pjūklas medžiui NAC SMART 165mm 20V be akumuliatoriaus. Kategorija: Diskiniai pjūklai.

• Gamintojas: NAC
• Modelis: 5905842532083

NAC SMART NS-CS-20V-B (BODY)

⭐ Unlimited, with maximum precision

Take her to the roof, to the garage and to the construction site. The NAC SMART 20V circular saw gives you freedom without cable and clean, reliable cutting when pace and precision matter.

Handy, well balanced and ready to go⚡

⚡Work without interruptions

Want to work longer? For best results and maximum long run time on a single charge, we recommend choosing the NAC Smart 4Ah battery.

☑ Operate SMART with NAC

✔ 20V wireless freedom: you work where you need to, without extension cords

✔ Clean and fast cutting: 4000 rpm /min and Ø165 mm disc ensure smooth feed and nice edge

✔ Convenient adjustment: depth and angle under control - up to 55 mm at 90° and 36 mm at 45°

✔ Simple setting of the cutting line: guide bar included for easy parallel guidance

✔ Replacing the disc in a few moments: spindle lock and attached hex key

✔ ⭐Safe and convenient operation: shield cover, switch lock against accidental start, rubberized handle fits securely in the hand

✔ Common 20V system: one battery for multiple tools NAC SMART

‼ NOTE‼ The tool is sold without battery and charger

❇️ Clean and Fast Cutting

A speed of 4000 RPM combined with a Ø165 × 1.6 mm blade provides smooth cutting, reduced resistance, and a clean edge without splinters.

It runs smoothly along the guide rail, doesn't burn the material, and leaves a neat finish on wood, plywood, or laminate.

☑️ Ideal when speed and quality of finish are important.

❇ Precisely, just the way you like it

Wing screws and clear scales allow you to instantly set the depth up to 55 mm at 90° and 36 mm at 45°.

For simple, parallel cuts, you will use the included guide bar- stabilizes the track, makes it easier to draw lines and eliminates the "swimming" of the saw, so that each cut is repeatable and even.

❇ Safety in SMART standard

The shield separates the blade outside the cutting line, and the switch lock prevents accidental start-up during handling or adjustment.

Rubberized, non-slip grip lies securely in your hand - you have better control over the cutting path and less fatigue with longer work. The design promotes ambidextrous handling, so the tool behaves stable and predictable.

☑ One battery for multiple tools

⚡The NAC SMART NS-CS-20V-B battery circular saw operates in the NAC SMART 20V system.

Do you have batteries from other NAC SMART tools? They also fit here. Depending on your needs, choose a battery with a capacity of:

• 2.0 Ah,
• 4.0 Ah.

You decide how long you want to work.

Compatible chargers:: NS-WC-20V and NS-FC-20V.

‼ NOTE‼ The tool is sold without battery and charger

☑ A must have in your workshop

• Cutting furniture board, OSB, MDF, plywood, boards and countertops
• Longitudinal and transverse cuts, as well as at an angle when installing shelves, bodies and slats
• Quick finishing work on the construction site and in the home workshop

❇ Best practices for using a circular saw

• Wear glasses, earmuffs and a mask; work in a well-lit area.
• Check the dial (sharpness, cracks, beating) and correct installation.
• Set the depth so that it protrudes under the material approx. one tooth of the disc.
• Immobilize the material (clamps/vise); keep your hands away from the cutting line.
• Stand on the side of the cutting track, not behind the disc - you minimize the risk of recoil.
• Start cutting after reaching full rotation; do not press excessively.

• Do not put the saw down until the disc stops; make adjustments after disconnecting the battery.

❇ Contents of the set

✔ Hand circular saw NS-CS-20V-B

✔ Guide rail

✔ Hex key for disc replacement

✔ Operating manual, warranty card, EC declaration of conformity*

* EC certificate of conformity is a confirmation that the device you purchased meets all the essential health and safety requirements laid down when using the equipment.

✏ Technical data

• Power supply: 20 V DC
• No-load speed: 4000 min⁻¹
• Disc: Ø165 × Ø20 × 1,6 mm
• Max. cutting depth 90°: 55 mm
• Max. cutting depth 45°: 36 mm
• Protection class: III
• Handle: rubberized
• Mass (without battery): 2,6 kg
• Year of manufacture: 2025
• Battery (sold separately): 20V Li-Ion 2,0 Ah (NS-20V-2A) / 4,0 Ah (NS-20V-4A)
• Chargers (sold separately): NS-WC-20V / NS-FC-20V

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	NAC
Parametry	Manufacturer code	5905842532083
Parametry	EAN (GTIN)	5905842532083
Parametry	Series	NAC SMART
Parametry	Packaging status	original
Parametry	Batteries included	no
Parametry	Power supply	rechargeable battery
Parametry	Rotational speed	4000 rpm
Parametry	Disc diameter	165 mm
Parametry	Saw bore diameter	20 mm
Parametry	Working with guide rail	yes
Parametry	Maximum cut depth	55 mm
Parametry	Cutting depth at 45 degrees	36 mm
Parametry	Device weight	2.6 kg