Automobilių diagnostikos įrenginys LAUNCH x431 CRP 919x BT CanFD, 24 mėn. atnaujinimai

Trumpai apie prekę

Prekė: Automobilių diagnostikos įrenginys LAUNCH x431 CRP 919x BT CanFD, 24 mėn. atnaujinimai. Kategorija: Diagnostiniai testeriai ir sąsajos.

• Gamintojas: Launch
• Modelis: CRP 919E BT Bluetooth Skaner Interfejs Tester

The subject of the offer is the latest model Launch CRP 919 BT 2025

Launch 919X BT with 2 year x version update with piirswions battery

Head v5.0 supporting CAN FD and DoiP protocols

-The diagnostic device is designed to work in the workshop.

The equipment is equipped with a 7 inch touch screen. The main unit has a durable housing made of plastic and rubber. It provides above-average mechanical resistance to damage during operation.

The devices come from the polish distribution of the company Launch. We have license documents for each device.

Information:

Tablet guiding software: ANDROID

working language: Polish

Hardware version: 2026 Professional EUROPE

software version: Latest available software in Polish

update period: 24 months from the date of device activation.

Connectivity: Bluetooth

scope of service: Passenger vehicles, commercial vehicles (up to 3.5tonnes)

wiring: OBD connector V5.0 CAN FD

The device does NOT lock after the update period is complete. Only Online functions are restricted. Update after 24 months can be extended with an authorized dealer

Device functions:

The tester is used for comprehensive operation of vehicle electronics, provides the possibility of full diagnostics, coding, personalization of controllers and performing the main service functions of the so-called. executive functions.

Due to the enormity of inquiries and discussions on the subject. range of precise service, I will allow you to list basic, verified capabilities. However, please note that with each software update, the functionality of the tester changes and various functions can be activated. We will also list confirmed problems that the user of a particular vehicle model may face.

• General system scanning: All passenger and commercial vehicles.
• Smart scanning (reading by VIN): vehicles with OBD II after 2001. The model base is constantly growing, of course, please remember that not every model will be able to verify without incorrectly after VIN
• Online coding: not available
• Personalization: BMW/VAG/MB Group until 2022.
• Driver programming: Most EU and Japan brands and Ford USA and GM until 2019 (April) then full online service. USA other brands for detailed verification.
• Modification in vehicle soft number: Mainly VAG Group models
• Configuration/ parameterization PROXY: FCA, Stelantis( PSA,Opel,FCA)/Nissan
• Offline programming read. (programming, adaptation of new drivers and components) NEW, not used from another car (it is about drivers, e.g. motorrol,continental,siemens); most popular models since 2001-2022

In most vehicles you can come to the same function by different routes, you can use function shortcuts, you can use the direct function so-called. the way through the controller. You can also perform general parameterization after a VIN scan.

Please remember that these are advanced devices and their operation requires at least a little knowledge of the subject of diagnostics, of course everything is to be learned, but it requires a little time and most importantly willingness.

Main capabilities of the tester used in everyday work

• Reading CAN bus errors
• Reading DTC/fault codes
• Reading real-time parameters/Live DATA/Graphics
• Reading VIN numbers
• Reading driver numbers and versions
• Reading the stored waveform in memory of various components
• Adaptation of components
• Adaptation of controllers
• Component training
• Forced commissioning of components
• Resumption of work Pumps,windmills,mechanisms
• Operation of EGR exhaust gas reciculation systems
• Operation/burning/adaptation of DPF particulate filters
• Support for ADBLUE and the entire EKO infrastructure in vehicles
• Support for service modes, i.e.:
• reset of the service control,
• service control reset- In kilometers and time
• Brake pad service settings
• setting of the electric handbrake
• pump and ABS venting mode
• calibration of the steering wheel position sensor
• Turn angle sensor calibration
• programming of Injectors
• battery programming
• Key programming (list available_)
• NIVO programming, Airmatic/pneumatic suspension
• calibration of the gearbox
• calibration of pneumatic components
• Activation of hidden functions (highlighting of corners, cruise control, etc. )
• Reset mode after an accident

The tester has the so-called. Maintence Funkction, i.e. derived shortcuts to support selected service functions from the device desktop, without having to enter the controller after a full scan of the vehicle

• OIL reset
• DPF regeneration
• ABS/blocks- replacement mode
• BATTERY encoding
• Transmission adaptation reset
• coding of injectors
• steering angle sensor encoding
• encoding of the suspension position/height sensor
• adpathy of front lamps
• adaptation of EGR and throttle
• reset modes transport
• reset imobilizer
• Airbag reset (of course if you do not need to disassemble the controller)
• Window reset/sunroof adaptation
• Reset vehicle personalization settings i.e. locks, lighting(leaving home)
• Navigation memory reset (so-called data cleaning)

Here we will list the functions that THIS MODEL WILL NOT DO LAUNCH

-interference in memory of Eprom state kilometers.

-Flash the driver memory and upload it to the driver you are using from another vehicle. Only the highest PADV and PAD VII models have this feature.

-Increase in vehicle power

-change the main menu language, if there is no choice, then we have the need to code a service device for a specific brand.

-full encoding of lamps from the USA, I note that full, because sometimes it is possible to program lamps front and back not anymore, or vice versa.

-Problem brands, with limited functionality, i.e. we will make the basics but we will not do wide coding: IVECO since 2019, Jaguar,Land Rover (02-11), Adblue system in the PSA group (boxer 2.0 hdi euro6, Jumper) reads but does not program after replacing pumps, tanks. Mercedes SBC until 07r, FCA ignition lock in 1.3 JTD only manually), Replacement of pads (Aston martindo 16r, maserati- only diagnostics until 21r. Unfortunately, there are no perfect devices, let's remember this

SET COMPOSITION

• Protective case
• Main Device/ Tablet
• Interface v BT 5.0OBD 16 pin
• Charger for tablet
• Authorization documents and licensing codes
• Table of contents of the suitcase
• User manual

Each new model of the V5.0 head from Launch has an interface CANFD and DoiP

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Launch
Parametry	Product weight with unit packaging	1 kg
Parametry	EAN (GTIN)	5904954302898
Parametry	Manufacturer code	CRP 919E BT Bluetooth Skaner Interfejs Tester
Parametry	Batteries included	yes