Automobilio rampos STIX RAID 6T, 2 vnt.

Trumpai apie prekę

Prekė: Automobilio rampos STIX RAID 6T, 2 vnt.. Kategorija: Rampos.

• Gamintojas: Stix
• Modelis: 38-03-78591

The PNS-01 car ramps allow you to lift the wheels of one axle to a height of 155 mm, facilitating access to the vehicle chassis. The set consists of two ramps made of durable plastic and its maximum load is 6000 kg.

Catalog number: 38-03-78591

Model: PNS-01

Manufacturer: Stix Tool

Number of raids included: 2 pcs.

⚙ Technical specification:

• Maximum set load: 6000 kg
• Wheel support height: 155 mm
• Length of one inrun: 905 mm
• One overrun width: 305 mm
• Total height with limiter: 205 mm
• Material: plastic
• Color: graphite
• Non-slip feet: 6 on each inrun
• Transport handles: side and rear

Easier access to the chassis

Overruns PNS-01 allow you to set the wheels of one axle at a height of 155 mm. Increased space under the vehicle makes it easier to carry out inspections, maintenance and minor maintenance work. The ramps can be used in the garage, workshop, or vehicle service point.

The set includes two ramps designed for simultaneous positioning in front of the wheels of one axle. The maximum load capacity of the whole set is 6000 kg, thanks to which the ramps can be used for passenger cars and selected light commercial vehicles, provided that the permissible load is not exceeded.

Wheel stop design

At the end of each inrun there is an elevated stop that helps stop the wheel on the upper surface. It reduces the risk of accidentally driving off the ramp during entry.

The total height of the overrun with the limiter is 205 mm.

The ramps are made of durable plastic. Reinforced, openwork construction provides adequate rigidity while reducing the weight of overruns.

The profiled entry surface improves tread contact with the ramp, and the gentle angle allows the wheel to be smoothly positioned on the riser.

Rubberized non-slip feet

On the bottom of each inrun there are six rubberized anti-slip feet. They are located in the front and rear of the structure, increasing the adhesion of the ramp to the ground and helping to limit its movement when entering the vehicle.

Raids should be placed on an even, hard and stable ground.

The surface should be free of oil, sand and other impurities that can reduce the adhesion of the feet.

The ramps should be placed in parallel and precisely adjusted to the position of the wheels.

Handles for easy carrying

Each inrun has profiled handles located on the sides and in the back of the structure. They make it easier to move, set up and put down ramps when the job is done. The ramps do not require assembly and are ready to use when properly positioned on the ground.

After driving the wheels on the upper surface of the ramps, pull the parking brake. The vehicle shall also be geared or the automatic transmission shall be set to the ‘P’ position.

Wheels remaining on the ground should be secured with appropriate wedges.

What sets this product apart?

• maximum set load of 6000 kg,
• lifting the wheels of one axle to a height of 155 mm,
• high stop to help stop the wheel,
• reinforced, openwork construction,
• profiled surface improving contact with the tire,
• gentle angle of entry,
• six rubberized feet on each inrun,
• handles placed on the sides and back,
• no need for assembly,
• set containing two ramps.

Why is it worth it?

The PNS-01 inruns make it easy to get extra space under the vehicle without having to mount ramps before starting work. Two separate ramps allow you to lift the wheels of one axle at the same time, and the support height of 155 mm increases access to the elements under the car.

Profiled surface, rubberized feet and raised stops support the correct positioning of the vehicle on ramps. Transport handles, on the other hand, make it easier to carry and store inruns between subsequent applications.

FAQ

1. How many raids are included?

• The set includes two ramps designed to be positioned under the wheels of one axle of the vehicle.

2. What is the maximum load on the set?

• The maximum load of the whole set is 6000 kg.

3. To what height are the wheels raised?

• The wheel support surface is located at a height of 155 mm. The total height of the overrun with the limiter is 205 mm.

4. Do raids have protection against sliding?

• Yes. There are six rubberized anti-slip feet on the bottom of each inrun, which help to limit the movement of the ramp on the ground.

5. Do ramps require assembly?

• No. Raids do not require assembly and are ready for use when properly positioned on an even, hard and stable ground.

6. Do raids have wheel stops?

• Yes. At the end of each ramp there is an elevated stop that helps stop the wheel on the top surface.

7. How should I secure my vehicle when I enter the ramps?

• Pull the parking brake, turn on the gear or “P” position and secure the wheels remaining on the ground with appropriate wedges.

Photo gallery

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Stix
Parametry	Product weight with unit packaging	9.375 kg
Parametry	Manufacturer code	38-03-78591
Parametry	EAN (GTIN)	5903636082493