Automobilio rampos 8 tonų, 2 vnt., sudedamos

Trumpai apie prekę

Prekė: Automobilio rampos 8 tonų, 2 vnt., sudedamos. Kategorija: Rampos.

• Gamintojas: TECHTOOL
• Modelis: TTCR01 NAJAZD SAMOCHODOWY

📢Buy from the product set - we add something useful for every DIYer! 🆓🎁

Technological advantage of TECHTOOL

4 solutions developed to maximize the safety, stability and functionality of raids.

► Patented STACKING SYSTEM

► Patented RUBBER INRUN STABILIZATION SYSTEM

► StabiFlex – dynamic stable raid zone

► Wheel stabilization socket

Technical data:

• Brand: TECHTOOL
• Model: TTCR01
• Max lifting capacity: 8 tons
• Patented systems: stacking, rubber overrun stabilization system
• Original solutions: StabiFlex - dynamic stable overrun zone, Wheel stabilization socket
• Height of the front wall: 21.5 cm
• Overrun working height: 16 cm
• Overrun working width: 24 cm
• Overall length of overrun: 90.5 cm + 10.5 cm overrun rubber
• Set weight: 9.01 kg

✅ The raids have been tested under the front axle of the tractor unit

► Every TECHTOOL product undergoes practical endurance tests in real conditions before being put on sale.

► As part of the test, we drove the front axle of an 8-tonne Renault Trucks T tractor unit onto the TECHTOOL raids. The test was carried out in conditions similar to everyday use, and all the pressure of the front axle was transferred directly to the ramps.

► Effect? TECHTOOL raids easily withstand the load, showing no cracks, deformations or damage. The test confirmed the high strength, stability and robustness of the structure, even under heavy loads.

✅Patented stacking system for car driveways TECHTOOL

We have equipped TECHTOOL raids with a patented STACKING SYSTEM enabling STABLE STACKING OF SUBSEQUENT OVERRUNS ON TOP OF EACH OTHER.

Properly designed construction profile allows for precise positioning of elements without the use of additional protection.

The solution LIMITS THE SPACE NEEDED FOR STORAGE and INCREASES THE TRANSPORT EFFICIENCY of more raids.

In practice, this means:

✔ less space needed to store raids

✔ easier transport of more raids at the same time

✔ better organization of warehouse and workshop space

✔ faster loading and unloading during daily operation

✅ Patented rubber overrun stabilization system

In the lower part of the entrance zone, a patented rubber element with a HIGH FRICTION COEFFICIENT was used.

When the vehicle enters, the rubber is pressed against the ground, increasing the grip of the overrun and reducing the risk of its displacement.

The result is a STABLE ENTRY ON THE INRUN, without sliding.

✅ StabiFlex – dynamic stable raid zone

StabiFlex technology is based on the reinforced front inrun, which has been additionally stiffened with a system of internal harmonica reinforcements.

Properly designed profile means that the wall DOES NOT ADHERE TO THE GROUND WITH THE ENTIRE SURFACE, which allows you to more effectively take over the loads generated during entry.

The specially designed design of the front wall allows for a more even transfer of loads arising during the entry of the vehicle.

THANKS TO THIS, THE inrun WORKS MORE STABLE, ELIMINATING THE "JUMPING" EFFECT AND REDUCING THE LOAD ACTING ON THE MOST EXPOSED ELEMENTS OF THE STRUCTURE.

✅ Wheel Chock Socket for Car Ramps TECHTOOL

Specially shaped wheel chock socket makes it easier to correctly position your vehicle on the ramps and provides more secure wheel support after driving up.

The appropriately designed shape helps keep the wheel in the optimal position, increasing vehicle stability during use.

This makes driving onto the ramps more intuitive, and the car remains more securely positioned on the structure.

For full safety after positioning your vehicle on the ramps, we always recommend engaging the parking brake and leaving the vehicle in gear.

✅ Raids made of high quality HDPE plastic

► HDPE stands for High-Density Polyethylene, or high-density polyethylene, one of the most widely used plastics in the world, produced in the process of polymerization of ethylene.

► The specific technology of its production, the use of an appropriate catalyst and the conditions of the reaction lead to the formation of a polymer with extremely HIGH molecular density and crystallinity.

► This structure makes HDPE highly RESISTANT TO MECHANICAL AND CHEMICAL RESISTANCE.

► Products made of this material are extremely DURABLE AND RESISTANT TO mechanical DAMAGE.

✅ Non-slip surface

The specially designed profile of the working surface supports the wheel during entry and improves the contact of the tyre with the structure.

Thanks to this, the vehicle can be precisely positioned on raids before work begins.

✅ A set of two raids

Two raids allow you to lift the vehicle quickly and comfortably without the need for a lift.

It is a practical solution for chassis control, service work, oil change, exhaust system inspections and ongoing car service in the backyard garage.

The set includes:

• Car raids 2 pcs.
• Instructions for using in Polish
• Original manufacturer's packaging

Frequently Asked Questions (FAQ)

Are the raids suitable for wheel changes?

No. Raids are designed for inspection and service work that does not require removing wheels or relieving suspension. They will work well for chassis inspection, oil change, cleaning or maintenance.

Are raids safe when entering the car?

Yes. TECHTOOL inruns are equipped with a patented rubber inrun stabilization system, non-slip surface and wheel stabilization socket, which increases stability during entry and use.

What is the maximum load capacity of the raids?

The maximum lifting capacity of the set is 8 tons, which allows for safe use with most passenger cars, SUVs, vans and commercial vehicles within the permissible load range.

Are inruns suitable for cars with low suspension?

The overrun profile is designed in a way that allows most passenger cars to enter comfortably. Before buying, however, it is worth comparing the ground clearance of the vehicle with the dimensions given in the technical specification.

Can raids be used on paving stones or concrete?

Raids should be used on an even, stable and hardened ground. The best working conditions are provided by concrete surfaces and workshop floors.

What material were the raids made of?

The ramps are made of high quality HDPE (high density polyethylene), which is characterized by high mechanical resistance, durability and resistance to many chemicals.

Are the raids weatherproof?

Yes. HDPE plastic is characterized by high resistance to moisture, corrosion and many external factors, thanks to which inruns can be used both indoors and outdoors.

Are raids resistant to cracking?

Yes. The structure is equipped with StabiFlex technology using a specially designed front wall with internal folding reinforcements, which more effectively distributes the loads generated during the vehicle entry.

Are raids suitable for electric cars?

Yes, provided that the mass of the vehicle does not exceed the permissible raid capacity.

Is the wheel stable on raids?

Yes. The specially profiled wheel stabilization socket helps to keep the wheel in the correct position when the entry is complete, increasing the stability of the vehicle during use.

Do raids take up a lot of space during storage?

No. Thanks to the patented stacking system, the ramps can be stably stacked on top of each other, limiting the space needed for storage.

Can raids replace a car lift?

In many basic service work yes. The ramps provide quick access to the chassis without the need for a lift, making them perfect for oil changes, technical inspections, and inspections of the components under the vehicle. However, they are not designed for work that requires dismantling wheels or fully lifting the car.

Are raids suitable for car repair shops?

Yes. High load capacity, durable construction and proprietary TECHTOOL solutions make the ramps work well both in the backyard garage and during professional use.

What working height do raids provide?

The working height of the inruns is 16.5 cm. It provides convenient access to the chassis and many consumables of the vehicle without the need for a lift.

Do raids require assembly?

No. The product is ready to use immediately after unpacking and does not require additional assembly.

Why choose TECHTOOL raids?

TECHTOOL raids are equipped with two patented solutions and proprietary technologies that increase stability, functionality and comfort of use. It is a combination of practical construction solutions with high load capacity and durability of HDPE material.

Specifications