Automobilio martenų baidyklė Kemo M176 MEGA POWER 2in1 ultragarsas + įtampa

Trumpai apie prekę

Prekė: Automobilio martenų baidyklė Kemo M176 MEGA POWER 2in1 ultragarsas + įtampa. Kategorija: Gyvūnų atbaidikliai.

• Gamintojas: Kemo
• Modelis: 857140

🟦 Kemo M176 expels martens emitting high ultrasonic tones and electric shock in the engine compartment caused by touching tiles located under a voltage of approx. 200 - 300 V/DC (weak current pulses that do not harm the animal, but only flush it out)

Particularly low power consumption (< 0,005 A) and automatic shutdown at a battery voltage < 11,5 V (will not discharge it at a longer vehicle stop).

Before installing the kun deterrent, please thoroughly clean the engine compartment of the vehicle, as well as the ground on which you usually park your car (e.g. garage). Kunas mark their territory with scent marks and can become very aggressive if they smell another marten in their territory.

🟦 Launch:

The fuse, which was removed from the fuse base before installation, must be reinstalled there. If everything is properly connected and the car is parked and the engine is turned off, the plates begin to conduct high voltage and a small LED light of the module begins to flash (every 5 - 12 seconds). During the first start, wait about five minutes for the LED to light up.

🟦 Technical specification:

◼ operating voltage: 12 - 15 V/DC (car battery)

◼ average current consumption: < 5 mA

◼ automatic shutdown: if the battery voltage drops below 11,5 V(± 5%)

◼ output voltage: approx. 200- 300 V/DC

◼ ultrasound frequency: approx. 22 kHz ± 10%

◼ sound pressure: max. ok. 100 dB ± 20%

◼ ultrasound propagation angle: approx. 160 degrees

◼ speaker: piezoelectric transducer transmitting vibrations to the upper part of the housing (waterproof)

◼ temperature range: approx. - 25 to + 80°C

◼ function optical indicator: blinking LED (every 5 - 12 seconds)

◼ high voltage cable length: 4 meters (± 10%)

◼ fuse in fuse holder: 1 A

◼ high voltage contact plates: 6 pieces, sliding, each approx. 62 x 42 mm, stainless steel

◼ dimensions of the basic device: 40 x 50 x 70 mm (without cable passage and mounting brackets)

The control device is water and dustproof according to IP 65*, high voltage plates and fuse must be mounted in a dry place.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Kemo
Parametry	Kind	repellent
Parametry	Use Against	martens
Parametry	Manufacturer code	857140
Parametry	EAN (GTIN)	4024028031767
Parametry	Batteries included	no