Automobilinis žirklinis keltuvas Kroemer X47, 4,1 t, 1,2 m, 400 V

Trumpai apie prekę

Prekė: Automobilinis žirklinis keltuvas Kroemer X47, 4,1 t, 1,2 m, 400 V. Kategorija: Žirkliniai keltuvai.

• Gamintojas: Krömer
• Modelis: X47

X47 400 V lifter (also available in 230 V version)

• retractable ramps
• total length with extended ramps up to 2.410 mm
• built-in tilting aid for lifting from zero position
• includes a mobile kit/chassis for easy movement of the lift anywhere
• Is low sports cars a challenge? With this lift it is possible - extremely low overrun height (11 cm) despite the 3 mm thicker overrun platform
• low demand for space
• limit switch, beep and CE-Stop when lowering as protection against latching in the foot area (protection against latching)
• electro-magnetic safety hitch
• lifting capacity up to 4.100 kg
• Lifting height up to 1200 mm
• support of lift from zero position
• Mobile kit/chassis included for easy movement
• safety latch: 380 mm
• lifting capacity per ramp: 1000 kg

Special features of the X47 scissor lift

• first quality processing with CE certificate for UDT approval
• production according to ISO 9001
• two-wire system for symmetrical pressure distribution in the system
• low space requirement and absolute freedom of setting
• Powder coated finish with scratch-resistant surface treatment
• powerful electric motor in hydraulic oil with control unit IP 54
• lowering the safety device
• Wear-resistant scissor joint bearings
• mechanical synchronization control
• Overrun ramps with lock, load capacity up to one ton per ramp (4x ramps)
• two strong, hard chrome-plated hydraulic cylinders
• protection of the feet
• electronic limitation of stroke with limit switches

The X47 scissor lift is designed specifically to meet the demands of tire work and bodywork. At the same time, it is an excellent workstation in the workshop for service work and work in the interior of the vehicle. Thanks to a small investment, you can quickly create an additional, universal workstation – without having to make foundations.

With its flat design, the X47 allows for space-saving storage. Compressed air is not required to control the safety locks, and thus no compressor is needed. In the X47 model, locking is done automatically.

Thanks to the efficient electric motor operating in the hydraulic system, quiet operation is possible. Another advantage of the control panel is the factory-installed industrial control. The electrical installation of the Kroemer desktop consists of only three main components: a microcomputer controller, a mechanical plate and an engine contactor.

Only the 400 V variant is suitable for lifting buses, depending on the wheelbase, or similar vehicles.

Note: Before purchasing, it is necessary to check the wheelbase of the vehicle. The producer’s liability is excluded.

For the first startup you need 5 liters of HLP46 hydraulic oil. The instruction manual must be followed - the dimensions of the lift are on the technical drawing.

Hint: To ensure trouble-free operation of the scissor lift and avoid damage to the vehicle, the height of the room must be at least 3,20 m or 3,50 m for short lift scissor lifts, depending on the height of the vehicle and the height of the lift. The dimensions of the lift should be checked on the technical drawing.

Specifications