Automobilinis stiprintuvas EDS3000.1, 1 kanalo, su 53 mm² CCA-20 laidais ir HCM6 kondensatoriumi

Trumpai apie prekę

Prekė: Automobilinis stiprintuvas EDS3000.1, 1 kanalo, su 53 mm² CCA-20 laidais ir HCM6 kondensatoriumi. Kategorija: Stiprintuvai.

• Gamintojas: Edge
• Modelis: EDS3000.1+CCA-20+HCM6

✅ READY-MADE ASSEMBLY KIT – AMPLIFIER + CABLES + CAPACITOR

The construction of a very powerful Car Audio system requires not only an efficient amplifier, but also properly selected wiring and stable power supply. Only the combination of these elements allows you to use the full potential of the audio system.

That is why we have prepared a ready-made set consisting of:

✔ Amplifier EDGE EDS3000.1FD-E3

✔ CCA-20 cable set

✔ Hollywood Energetic HCM6 Capacitor – 6 Farad

When buying a set, you do not have to complete elements from several different offers. You get all the basic components you need to mount an amplifier and build an efficient Car Audio system.

🔊 EDGE AMPLIFIER EDS3000.1FD-E3 – 3300 W RMS FOR THE MOST DEMANDING INSTALLATIONS

EDGE EDS3000.1FD-E3 is a class D monoblock using modern Full Bridge technology, thanks to which it achieves very high efficiency while maintaining compact dimensions. It is designed for powerful Car Audio systems and subwoofers that require a lot of stable power.

The specially designed heat sink effectively dissipates heat, while active crossovers and Bass Boost adjustment allow you to precisely adjust the sound to your preferences. The set also includes a remote control that allows you to adjust the bass level from the driver's seat.

Technical specification

• Model: EDGE EDS3000.1FD-E3
• Type: Monoblock
• Number of Channels: 1
• Amplifier Class: D (Full Bridge)
• RMS power at 4 Ω: 1 × 1100 W
• RMS power at 2 Ω: 1 × 2050 W
• RMS power at 1 Ω: 1 × 3300 W
• Maximum power: 6600 W
• Minimum Impedance: 1 Ω
• Frequency Response: 15 Hz – 20 kHz
• LP/HP filter
• Crossover adjustment range: 15 Hz – 20 kHz
• Bass Boost Adjustment
• Remote control for bass level adjustment
• Recommended fuse: 250 A
• Dimensions: 63 × 184 × 232 mm

🔌 SET OF CCA-20 CABLES – SET FOR MOUNTING THE AMPLIFIER

Even the best amplifier will not work at full capacity if it is connected with too thin or poorly selected wires.

Properly selected cables have a huge impact on the operation of the amplifier. The greater its power, the greater the current it draws from the battery. Too thin wires cause voltage drops, limit the power achieved and can lead to overheating of the installation.

Therefore, we choose the right cross-section of wires for each set, so that the amplifier can work stably, safely and use its full capabilities.

Content of the set

• Power cord CCA – 53mm², length 5 m
• CCA mass cable – 53 mm², length 0,8 m
• Double shielded RCA cable with REM cable – 5 m
• REM cable – integrated with RCA cable
• Mini ANL fuse holder
• Fuse 60 A
• Eyelet tips
• Fork tips
• Mounting elements

⚙ What are the individual cables used for?

✔ Power cord – supplies energy from the battery to the amplifier.

✔ Bulk cable – ensures proper closure of the electrical circuit.

✔ RCA cable – transmits the audio signal from the radio to the amplifier.

✔ REM cable – automatically starts the amplifier when the radio is turned on.

✔ Fuse – protects the electrical system from the effects of short circuit and overload.

⚡ HOLLYWOOD ENERGY CAPACITOR HCM6 – STABLE POWER SUPPLY DURING STRONG BASS

During strong bass beats, the amplifier can temporarily draw a very large current from the car’s electrical system. This causes temporary voltage drops, which can affect the stability of the entire system.

Hollywood Energetic HCM6 with a capacity of 6 Farads stores electricity and quickly returns it when the amplifier needs it most. Thanks to this, it helps stabilize the supply voltage, reduces temporary voltage drops and relieves the electrical system of the car.

The most important advantages

• Capacity of 6 Farads
• Stabilization of supply voltage
• Energy storage
• Reducing temporary voltage drops
• Better working conditions of the amplifier
• Recommended for powerful Car Audio systems

Note: The capacitor does not increase the power of the amplifier. Its task is to stabilize the power supply and improve the operating conditions of the entire system.

⭐ WHY CHOOSE THIS SET?

✔ Complete set ready for assembly.

✔ One purchase instead of completing products from multiple offers.

✔ Amplifier, wiring and capacitor in one set.

✔ Safe and simpler installation.

✔ Save time and shipping costs.

✔ Ability to start assembly quickly

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Edge
Parametry	Model	EDS3000.1+CCA-20+HCM6
Parametry	Number of channels	1-channel
Parametry	Amplifier class	D
Parametry	Manufacturer code	EDS3000.1+CCA-20+HCM6
Parametry	Rated RMS power	3000 W
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE