Automobilinis įtampos keitiklis Polion 2000W, 12V/230V, grynos sinusoidės

Trumpai apie prekę

Prekė: Automobilinis įtampos keitiklis Polion 2000W, 12V/230V, grynos sinusoidės. Kategorija: Įtampos keitikliai.

• Gamintojas: Polion

The original POLION product is uncompromising quality, safety and reliability. The highest quality components and a modern production line allow you to get the final product that meets the expectations of the most demanding user.

A car inverter is a device that converts constant current with a voltage of 12V into alternating current with a voltage of 230V which is a standard throughout the European Union and most countries in the world. Designed for use in passenger cars, motorhomes and other places where there is no access to the electrical network.

⭐ Purpose:

✅ Powering devices in a wide range of power consumption such as: laptops, chargers (e.g. for phones, drones, power tools), TVs, monitors, power tools, household appliances, etc.

✅ Compatible with all electrical and electronic equipment due to pure sinusoidal output waveform.

✅ The converter easily supports power tools such as angle grinder, angle grinder or drill, lawn mower, refrigerator, ice maker, air conditioner, pumps, coffee maker.

✅ The converter has been checked by m.in. to power the pressure coffee maker 1450W - works properly.

⚙ Technical parameters:

• Status: new
• Usable power (continuous): 2000W
• Instantaneous power: 4000W (< 0,1s)
• Nominal input voltage: 12V
• Operating voltage range: 9,5-16V
• Efficiency: ≥90%
• Output voltage: 230V AC 50Hz
• Voltage waveform: pure sine wave
• Power consumption of the switched on converter in idle mode: < 15W
• Stand-by power consumption: ≤2mA
• USB ports: USB-A 5V/3,1A, USB-C (30W)
• Communication port for remote control: yes
• AC output socket: 1x type E (used in Poland)
• Display: yes (indicates battery status, input/output voltage, power, voltage frequency, error information)
• Remote control: yes, wired, remote on/off device, has a display showing the same as the display on the converter
• Voltage stability: +/- 3%
• Recommended batteries: Lead / AGM / Li-ion / LiFePO4
• Protections: too low DC voltage, too high DC voltage, thermal, short-circuit, overload
• Dimensions: 34 x 17,8 x 8,5 [cm] (L /width. /h. ) However, when installing, keep the safe distance required for effective cooling.
• Product weight: 2,8 kg
• Product weight with packaging: 3,5 kg
• Stock code: PLNINV034

✅ Output waveform shape - pure sine wave.

The shape of the output waveform of the converters is either pure sine wave or modified. The choice of type of converter depends on the devices it is supposed to power.

Pure sine wave is the same as in the power grid. Thus, it will be correct to work with all devices, even those very sensitive to the shape of voltage, or having AC motors.

Modified sine wave is a cheaper and simpler solution. It allows for the correct operation of most electronic devices. However, it will be not recommended or harmful to cooperate with devices with alternating current electric motors, such as fridges with aggregate, power tools. It is true that you can connect such tools, they will work, but it is harmful to them. There are also other devices that are very sensitive to the shape of voltage, but they are rare.

All our inverters are safe for equipment and produce pure sine wave.

✅ Full protection for connected devices

The intelligent control system and two fans ensuring proper cooling are responsible for the proper operation of the equipment and safety. The fans are controlled automatically depending on the temperature of the components. The converter is equipped with a number of specially designed protections guaranteeing full protection of connected m.in devices:

UVP - protection against too low supply voltage,

OVP - protection against too high supply voltage,

OTP - protection against overheating

SCP - short-circuit protection

OPP - overload protection

✅ Thoughtful design

The device is designed for convenient use regardless of where you are. The converter housing is made of high-quality aluminum, which is lightweight, durable and dissipates heat well.

The front of the converter has a type E power socket, used by m.in. in Poland, USB-A connector for charging 5V/3,1A, USB-C socket with a power of 30W and a communication port for the remote control. In the back of the converter, two fans have been installed to ensure adequate cooling (fans are controlled automatically depending on the temperature of the components) and plus and minus connectors, under which the battery is connected.

A convenient solution is the remote control panel, which can be mounted e.g. in the cabin of the car and turn on the converter.

➡ Set includes:

• Inverter
• Remote control
• Cables for connection to the battery
• Grounding cable
• Remote control cable
• Instructions for use in Polish

General Notes on Power Inverters.

Most power inverters operate on a 12V power supply, which is very common and convenient. However, this has some drawbacks due to basic physics that you should be aware of when using them.

• The current on the 12V side can reach very high values. For example, the nominal current for a 1000W inverter is approximately 90A.

High currents require the use of power cables with large cross-sections for two reasons:

• The first, obvious reason, is cable heating. This is unlikely to cause the cable to burn out, but it can easily melt the insulation and create a fire risk for nearby materials.
• The second reason is voltage drop, which is very significant for a 12V system. Using a cable that is too thin can easily lead to a situation where the battery shows 12V, but with the inverter under load, the voltage drops by, for example, 2V along the cable. This will cause the inverter to shut down due to insufficient supply voltage. Therefore, the length and cross-section of the power cables are very important.

When selecting the power of an inverter, remember:

• An inverter should not continuously operate at its full power. Therefore, select an inverter such that the rated power of the connected devices does not exceed approximately 80% of the inverter's capacity.
• Some devices draw significantly more power for a short time when starting up. This includes anything with a motor. In such cases, the inverter's power should be considerably higher to handle the temporary, significant overload. The additional power reserve depends heavily on the specific type of device being connected, making it difficult to provide an exact ratio.

DC Power Circuit Protection:

• Practically all inverters have DC circuit fuses. These are built-in and soldered to eliminate contact points (due to high currents).
• Internal fuses should never blow during normal operation. They primarily protect the unit in case of device damage.
• When connecting an inverter, **we recommend using external fuses** on the DC line. We offer these, and they should be available for purchase at the top of the listing. They should be installed close to the power source, i.e., the battery. This protects the system from, for example, accidental short circuits occurring somewhere along the power line running to the inverter, such as a wire chafing against ground or accidental shorting near the inverter's DC terminals.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Effective power	2000 W
Parametry	Input voltage	12 V
Parametry	Product weight with unit packaging	3.5 kg
Parametry	Brand	Polion
Parametry	EAN (GTIN)	5907090801065
Parametry	Packaging status	original