Aukšto slėgio plovimo įrenginys 260BAR su automobilio priedų rinkiniu

Trumpai apie prekę

Prekė: Aukšto slėgio plovimo įrenginys 260BAR su automobilio priedų rinkiniu. Kategorija: Aukšto slėgio plovimo įrenginiai.

• Gamintojas: Abrams
• Modelis: MYJKA CIŚNIENIOWA ZESTAW WĄŻ ZWIJACZ + PIANOWNICA
• Įtampa: 230 V

POWERFUL PRESSURE THAT RESTORES SURFACES TO A SECOND LIFE – FROM THE FACADE TO THE ROOF!

• Maximum pressure 260B
• Pressing capacity 480l/h
• Aluminium Corded Pump
• Cavitation protectionsil
• Plungers with ceramic coating
• Nozzle with adjustable stream
• Long 10M hose adapted to High Pressure
• Snake located on the reel with retractor
• Water Filter
• Induction motor
• Aluminium Corded Pump
• Quick Connect
• Max temp. water supplied: 50C
• Water intake system (Self-priming)
• Foaming machine with detergent tank
• Wheels for easy carrying of the washer
• turbo nozzle
• Auto-Stop system

FACADE, CUBE, MACHINES? 260 BAR IS AN INDUSTRIAL POWERHOUSE THAT TURNS HEAVY CLEANING INTO A DAILY ROUTINE!

You look at the facade and instead of a light wall you see dark stains. Paving stones, which was once a showcase of the property, today is gray and subdued.

And you know what that means?

Hours of scrubbing. Returning to the same place a second time. Fatigue... and the effect is still not what you expect.

ordinary water only flushes the surface. There is no force to tear off the dirt that has bitten deep into the structure of the material.

And that’s why 260 BAR makes such a huge difference.

It is the industrial impact force of a stream of water that acts as a water hammer – it breaks down sediment, moss, grease and dried mud at the source, instead of just soaking them.

INDUCTION MOTOR? — POWER AND LIFESPAN THAT SIMPLY PAYS OFF!

The induction motor is a brushless design, without elements that generate excessive friction and with significantly lower heat emission during operation.

This means fewer wear-prone parts, less mechanical load and much higher durability of the entire drive.

Thanks to this, he works:

• more efficiently under heavy load,
• stable even during long cleaning sessions,
• cooler, which directly translates into longer service life,
• smooth and quieter — with a higher work culture.

This is a difference that feels not only in parameters, but above all in time.

Power remains stable. Performance does not decrease. Equipment does not "tire" with intensive use. And that is why an induction motor is an investment that really pays off.

CONNECTING ROD CERAMIC PUMP? THIS IS A CONSTRUCTION MADE FOR HARD WORK!

In a pressure washer, the pump is the most loaded element. It operates under high pressure, in continuous cycles, transferring the full energy of the engine to the water stream.

• The use of connecting rod system means more stable transmission and even operation of pistons under load. This type of construction minimizes mechanical overload and allows you to maintain constant operating parameters even during long cleaning sessions.

The key element is also pistons with ceramic coating.

Ceramics are characterized by:

• very high resistance to abrasion,
• lower coefficient of friction,
• better stability at high pressure and temperature.

In practice, this translates into slower wear of working elements and longer service life of the entire pump system.

This is a solution used in higher-end devices – where not only instantaneous power but long-term reliability counts. The ceramic boiler pump is the foundation of the equipment, which is to work intensively and maintain its parameters for years.

CONNECTING ROD CERAMIC PUMP? THIS IS A CONSTRUCTION MADE FOR HARD WORK!

In a pressure washer, the pump is the most loaded element. It operates under high pressure, in continuous cycles, transferring the full energy of the engine to the water stream.

• The use of connecting rod system means more stable transmission and even operation of pistons under load. This type of construction minimizes mechanical overload and allows you to maintain constant operating parameters even during long cleaning sessions.

The key element is also pistons with ceramic coating.

Ceramics are characterized by:

• very high resistance to abrasion,
• lower coefficient of friction,
• better stability at high pressure and temperature.

In practice, this translates into slower wear of working elements and longer service life of the entire pump system.

This is a solution used in higher-end devices – where not only instantaneous power but long-term reliability counts. The ceramic boiler pump is the foundation of the equipment, which is to work intensively and maintain its parameters for years.

LARGE AREA TO WASH? 480 L/H GUARANTEES CONSTANT FLOW RATE – FAST PACE WITHOUT DROPS AND WITHOUT FRUSTRATION

You start washing and after a few minutes you feel one thing – it will take time.

• Because even if the pressure is high, too little flow makes cleaning go slow. Water cannot keep up with the leaching of dirt, you have to go back to the same place, and the pace of work drops.

And this is where 480 l/h makes the difference.

• This is the real amount of water that passes through the pump every hour, creating a wide, intense stream capable of not only breaking up dirt, but also effectively flushing it out.

Instead of a whole day of cleaning – specific effects in a much shorter time, instead of frustration – full control over the pace of work.

DO YOU WANT THE PUMP TO LAST FOR YEARS? CAVITATION PROTECTION PROTECTS IT FROM QUIET SELF-DESTRUCTION FROM THE INSIDE!

Most pump failures do not start with a spectacular crack. It starts quietly. Invisibly. You have high pressure, high efficiency, everything works... until one day the pump starts to lose power, work louder, unevenly.

Why? Cavitation is often the culprit. What is it?

• When too low pressure or temporary water deficiency appears in the system, microscopic bubbles form powietrza.Pod by the influence of high pressure, these bubbles collapse rapidly. And their collapse is nothing more than microbuches.

• Imagine thousands of microstrokes per minute hitting the metal components of the pump – pistons, valves, working chamber. Each of them is small, but repeated constantly begins to literally “eat” the material.

Because the true quality of equipment is not just about power. It is about whether this power will stand the test of time.

SAND, RUST, SEDIMENT IN WATER? THE FILTER STOPS WHAT YOU CANNOT SEE!

The water you plug into the washer looks clean. Transparent. No smell. No visible contamination.

• But in reality, it often carries fine sand, rust from installations, mineral deposits or microscopic impurities, which you simply will not notice with the naked eye.

• The problem is that for the washer pump, these particles act as an abrasive.

• Once they get inside the system, they begin to circulate along with the water through the pump, valves and seals. Each such particle gradually wipes away the internal elements,

This is a simple solution that makes a huge difference.

The short hose stops working. 10 meters keeps pace and control over the whole area!

You know that feeling when things go smoothly... until suddenly you feel a tug? Another meter and it would be perfect. But no. We gotta get back. Move the washer. Set it up again. Several times during one wash. It is not the lack of power that slows down the work. This is a lack of coverage.

10 meters of hose completely changes the dynamics of operation.

• You walk around the car without interruption. You wash the entire driveway without reversing the equipment. You reach the facade and corners without moving the device every few minutes. The work is no longer interrupted. -It starts to be liquid.

SNAKE ON REEL WITH RETRACTOR – ORDER THAT SAVES TIME

• You don't pull a tangled wire on the ground. You don't fight breakdowns. You don’t waste time manually curling. You develop exactly as much as you need.

After finishing work, you roll the hose back onto the drum in one move.

• Zero tangling
• No mess
• Zero nerves

This is a comfort that you will appreciate after the first use.

QUICK CONNECT SYSTEM – QUICK CONNECTION, SECURE LOCKING AND ZERO WASTE OF TIME!

Do you know that?

• You want to start work, but first you have to twist everything. The thread does not want to catch, the elements need to be corrected, and each change of the tip means another spin and another minutes lost before the water flows again.

It's a trifle... but repeated many times in one wash it starts to get really annoying. That is why the Quick Connect System was used.

• This is a solution that eliminates the whole problem of installation.
• Instead of screwing in and matching elements – just one click.

You insert the tip, hear the characteristic “click” and the connection is immediately ready to work. No threads, no tools, no setting correction.

PLOT, GARAGE, CONSTRUCTION SITE WITHOUT WATER ACCESS? SELF-PRIMING GIVES YOU COMPLETE INDEPENDENCE FROM THE FAUCET!

Washing your car on your plot, cleaning tools, rinsing mud at a construction site? And suddenly a problem arises: no faucet nearby.

• With a traditional pressure washer, this means one thing – work stops, or you have to drag long hoses across half the property. Inconvenient, time-consuming, and often simply impossible.

This is exactly why the self-priming function makes such a huge difference.

• Thanks to it, the pressure washer doesn't need to be directly connected to the water supply. The device can draw water independently from an external source – all you need is a bucket, a rain barrel, a water tank, or even a container placed nearby.

How does it work?

The self-priming system allows the pump to draw water through a hose from any container and then deliver it under high pressure, just like when connected to a faucet.

You don't need a water installation. You don't need a connection. You don't need special adapters. All you need is a water source – the device does the rest.

Washing without drawing varnish? The detergent foamer dissolves dirt before you rinse it off with a strong stream!

At first glance, the car only looks dusty. But there is much more on its surface – sand particles, road dust, salt, dried mud and greasy deposits.

• If you immediately hit it with a strong stream of water or sponge, these particles begin to act like sandpaper.

• It is then that micro-scratches and matte marks appear on the varnish, which over time take away its shine.

Therefore, professional washing always starts with foam.

• The foamer with detergent creates a dense, active layer of foam that thoroughly covers the entire surface of the car. Foam does not drain immediately – it stays on the varnish for a while, thanks to which the detergent has time to penetrate the dirt and dissolve it.

Auto, cube, tools? Water with a temperature of up to 50°C increases the efficiency of washing and reduces the working time!

You know that feeling when you wash the surface with cold water and the dirt just smears?

• Fat on rims, road sediment on varnish, oil on tools or tarnish on paving stones can stick to the surface surprisingly strong.

Not because there is a lack of pressure, Often the problem is water temperature.

• Cold water removes some of the dirt, but grease, oils or dried residue remain glued to the surface. That is why hot water is so important in professional cleaning.

• The possibility of supplying water with a temperature of up to 50°C significantly increases the effectiveness of washing.

Why?

Because the higher temperature causes the dirt to start dissolve and peel off the surface, instead of just being moved by a stream of water.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Abrams
Parametry	Model	MYJKA CIŚNIENIOWA ZESTAW WĄŻ ZWIJACZ + PIANOWNICA
Parametry	Pump type	made of aluminum
Parametry	Operating pressure	155 bar
Parametry	Maximum pressure	260 bar
Parametry	Maximum power	2800 W
Parametry	Maximum input water temperature	50°C
Parametry	Water output	480 l/h
Parametry	Surface efficiency	200 m²/h
Parametry	Supply voltage	230 V
Parametry	Device weight	8 kg
Parametry	Hose length	5 m
Parametry	Product weight with unit packaging	10 kg
Parametry	Manufacturer code	MYJKA INDUKCJA 2800 W POMPA ALUMINIOWA TURBO
Parametry	For	for home use
Parametry	EAN (GTIN)	5906954293862
Parametry	Packaging status	original
Parametry	Certificates of conformity	CE
Parametry	Batteries included	no
Parametry	Power supply	network