Akumuliatorių taisymo įrenginys su automatine atkūrimo funkcija

Trumpai apie prekę

Prekė: Akumuliatorių taisymo įrenginys su automatine atkūrimo funkcija. Kategorija: Baterijų įkrovikliai.

• Gamintojas: ADGO
• Modelis: I-H185

High-quality automatic and precise rectifier microprocessor works great in professional car services and workshops as well as in home garages. The device can charge with a voltage of 12V.

✔ COMPACT SIZE

✔ 12V BATTERY REPAIR FUNCTION

✔ EASY TO READ LCD DISPLAY

✔ FITS 12V BATTERIES from 4Ah to 100Ah

1. BATTERY REPAIR MODE
2. FAST CHARGING 12V
3. BUILT-IN LCD DISPLAY
4. FOR START & STOP SYSTEMS
5. AUTOMATIC WINTER AND SUMMER MODE
6. BATTERY DIAGNOSTICS
7. ISOLATED CROCODILES (CLAMPS)

1. BATTERY CHARGE STATUS
2. WINTER ACTIVE MODE - rectifier automatically turns on this mode when the ambient temperature drops below 10°C
3. SUMMER ACTIVE MODE - the rectifier automatically turns on this mode when the ambient temperature is above 26°C
4. REPAIR - repair mode is active
5. INCORRECT CONNECTION

With the touch of a button, select the mode that will fit your battery perfectly. The 4 modes are:

✔ CAR/TRUCK - battery charging controlled by microprocessor (max. load 12V - 6A)

✔ AGM/GEL - charging AGM/GEL batteries

✔ MOTORCYCLE - for charging small batteries, the current load will not exceed 1,5A

✔ PULSE REPAIR - battery repair mode

The rectifier has a special function "repairing batteries discharged to zero" . The device uses high and low frequency pulse technology in this mode, it has a good effect of repairing and activating a very heavily discharged battery. We use this function when charging batteries that are completely discharged or have been idle for a long time and cannot be charged with other rectifiers.

• ✔ Provides protection against reverse polarity, short circuit, overvoltage, low voltage, overcurrent and overheating, feedback, electric shock (fully wrapped crocodile clamps are robust and safe to use).

• ✔ It has the function of maintaining a constant pulse current, stops when fully charged and prevents overcharging and discharge.

• ✔ The device has a fireproof coating

• ✔ equipment has an aluminum heat sink, and a silent fan for heat dissipation, which significantly extends the life of the charger and protects the equipment from overheating, from electrical shock (fully wrapped crocodile clamps are solid and safe to use).

• ✔ The device has very thick copper wire

✔ Product size: 150 x 85 x 62 mm.

✔ Net weight: 400 g.

✔ Output cable length: 62 cm,

✔ Input cable length: 52 cm.

✔ Input voltage: AC 110 - 220 V (50 - 60 Hz).

✔ Output voltage: DC 13,8 - 15,5 V.

✔ Output current: 6 A (max. ).

1. CONNECT THE RED CHARGING CLAMP TO THE CLAMP + POSITIVE ON THE BATTERY
2. CONNECT THE BLACK CLAMP TO THE CHASSIS OF THE CAR OR ENGINE BLOCK. (It should not be connected directly to the battery, do not connect it to fuel lines and tin or varnished body parts)
3. Connect the device to electricity.
4. With the MODE button, select the type of rectifier operation.
5. When the charging is finished, the display will indicate that the battery is full (100%)
6. You can leave the rectifier for another hour to charge better.
7. Then we turn off the equipment from the contact and disconnect the clamps in order: first black and finally red.

Specifications