{"product_id":"vartu-vezimelis-stumdomiems-vartams-80x80-6-ratukai-6-asis-nemokamai","title":"Vartų vežimėlis stumdomiems vartams 80x80, 6 ratukai + 6-asis nemokamai","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Vartų vežimėlis stumdomiems vartams 80x80, 6 ratukai + 6-asis nemokamai. Kategorija: Vežimėliai ir ritinėliai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Gp-System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e ZL.WBR.6BE.80x5.S\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVertical rollers of the trolley and their bearings are responsible for transferring the weight of the gate vertically, due to the characteristics of the construction of bearings are much less resistant to pressure \" on the side - not the top \" on the side of the gate \" to horizontal e.g. wind pressure .\u003c\/p\u003e\u003cp\u003eHorizontal rollers 2 pcs eliminate pressure on vertical rollers - carrying the weight of the gate \" on the side \"\u003c\/p\u003e\u003cp\u003eThe wear of bearings in the horizontal rollers of the trolley after years occurs faster due to the pressure \"on the side\" as from the weight from the \"top\". This is due to the construction and load-carrying capacity - ball bearing.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMore tight bearings - 2RS which gives longer operation of the trolley\u003c\/b\u003e - bearings without dirt between the bearing balls.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRS. - BUTYL bearing side gasket (black) not tin ZZ (silver) - less tight plate in the ZZ type.\u003c\/li\u003e\n\u003cli\u003ebutyl synthetic elastomer (the same material as in Simering seals) characterized by high gas and water tightness, good chemical resistance and flexibility in a wide temperature range, has a better contact or tightness with both bearing rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRS and ZZ bearing images\u003c\/p\u003e\u003cp\u003eOnly with us\u003cb\u003e 3 sizes of guide rollers are with bearing\u003c\/b\u003e and not sliding roller without bearing size:\u003c\/p\u003e\u003cp\u003e-33mm for 40\/40\/3 catheter\u003c\/p\u003e\u003cp\u003e-35mm for 40\/40\/2 catheter\u003c\/p\u003e\u003cp\u003e-43mm to 50\/50\/3 catheter which ensures much better rotation of the roller as in a roll without bearing.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOnly with us each roll as standard with angle\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFULL set - absolutely everything you need for the gate :\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e1) 2x 80x80x5 rail trolleys, self-aligning with adjustment.\u003c\/p\u003e\u003cp\u003e2) gate overrun roller with cap - 1 pc\u003c\/p\u003e\u003cp\u003e3) overrun socket to relieve trolleys in the state - closed gate - 1 pc\u003c\/p\u003e\u003cp\u003e4) free guide roller for your choice - 1 pc\u003c\/p\u003e\u003cp\u003eAll rollers always with angle for convenient installation:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e25 mm with angle (for catheter 30x30x2)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e33 mm bearing with angle (for catheter 40x40x3)\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e35 mm bearing with angle(for catheter 40x40x2)\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e43 mm bearing with angle (for catheter 50x50x3)\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease indicate in the notes to order the selected roll. In the absence of information, we send a 33 mm roll to the 40x40x3 catheter\u003c\/p\u003e\u003cp\u003e5 ) \u003cb\u003etop gripper Free 40 or 60 mm\u003c\/b\u003e - 1 pc\u003c\/p\u003e\u003cp\u003e6) instructions for installing the gate with the trolley spacing table in relation to the length and weight of the gate - we send by e-mail.\u003c\/p\u003e\u003cp\u003eWe use\u003cb\u003e wider version of the upper sheet of the bottom of the trolley - 120 mm \u003c\/b\u003e (upper horizontal sheet of the trolley)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e'large beans' for adjustment\u003c\/b\u003e, both in the bottom platform and the top plate of the trolley, which gives \u003cb\u003ethe largest adjustment range during assembly\u003c\/b\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ewidth 120 mm\u003c\/b\u003e not 100 mm .\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDESCRIPTION OF THE ELEMENTS:\u003c\/p\u003e\u003cp\u003e\u003cb\u003e- you have a gate with dense filling - wide profiles or wood, 6 is a good choice.\u003c\/b\u003e \u003cb\u003eAdditional horizontal roller stabilizes the gate operation.\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRollers: \u003cb\u003eØ68,5 mm × 19 mm, steel, \u003c\/b\u003erolled by us from grade steel C45 on CNC machine tools, \u003cb\u003eprecisely adjacent to the profile\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003equiet bearings 6204 with a high load capacity of tight type 2RS\u003cp\u003e\u003cb\u003eRolls mounted on bolts-nuts allow us to embed them more precisely as on welded pins.\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003e\u003cb\u003eNut screwed with technical glue to eliminate the possibility of unscrewing.\u003c\/b\u003e \u003cb\u003eThe rolls have never started in 15 years of our production of trolleys.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOverrun roller with cap and fender, mounted in the running rail.\u003c\/h2\u003e\u003cp\u003e\u003cb\u003eRemember!\u003c\/b\u003e \u003cb\u003eAssembly the socket and roller so that the roller clearly enters the socket (slightly lifting the gate). \u003c\/b\u003e \u003cb\u003eIt is designed to support the weight of the gate in the \"gate closed\" state.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThanks to the fender, the gate stops without additional noise, and the force of \"impact\" is reduced.\u003c\/p\u003e\u003cp\u003eThis is our production inrun roller, in which the roller is mounted on a pin fastened with a Seger ring (not crimped, without protection, as in most rollers on the market). This eliminates the risk of the pin breaking. This gives you the ability to disassemble and replace the roll itself in case of problems.\u003c\/p\u003e\u003cp\u003eMounting screws \"enter\" into a rivet nut with a long thread (10 mm, not like the competition thread only in a 3-4 mm plate), which ensures the stability of the mounting connection.\u003c\/p\u003e\u003cp\u003eStrong weld of the end cap protects against its detachment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eInrun socket.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRemember!\u003c\/b\u003e \u003cb\u003eAssembly the socket and roller so that the roller clearly enters the socket (slightly lifting the gate). \u003c\/b\u003e \u003cb\u003eIt is designed to support the weight of the gate in the \"gate closed\" state.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThis relieves the trolleys when the gate is closed.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eWe know from practice that the gates are closed 99% of the time, at 99% of customers. By relieving the trolleys, you extend their service life!\u003c\/p\u003e\u003cp\u003eThe socket has water drainage holes\u003c\/p\u003e\u003cp\u003e\u003cb\u003eRolls with thick rigid angle\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAll rollers are always with an angle for convenient installation:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e25 mm with angle (for catheter 30x30x2)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e33 mm bearing with angle (for catheter 40x40x3)\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e35 mm bearing with angle(for catheter 40x40x2)\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e43 mm bearing with angle (for catheter 50x50x3)\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease indicate in the notes to order the selected roll. In the absence of information, we send a 33 mm roll to the 40x40x3 catheter\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePRODUCED PRODUCT in Poland\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e- from scratch, from the level of the bar and sheet\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e- by buying from us you support poland productions .\u003c\/b\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGp-System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eZL.WBR.6BE.80x5.S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003efor sliding gates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eKind\u003c\/td\u003e\n\u003ctd\u003etrolley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"gpsystem_pl","offers":[{"title":"Default Title","offer_id":45742581940284,"sku":"13052307579","price":123.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/2161\/6188\/files\/Set-trolley-roller-for-sliding-gate-gates-80x80-6-rolls-6th-FREEBIE.jpg?v=1782893907","url":"https:\/\/market365.lt\/products\/vartu-vezimelis-stumdomiems-vartams-80x80-6-ratukai-6-asis-nemokamai","provider":"Market365","version":"1.0","type":"link"}