{"product_id":"vartu-ritineliu-vezimelis-stumdomiems-vartams-80x80-sustiprinti-guoliai","title":"Vartų ritinėlių vežimėlis stumdomiems vartams 80x80, sustiprinti guoliai","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Vartų ritinėlių vežimėlis stumdomiems vartams 80x80, sustiprinti guoliai. Kategorija: Vežimėliai ir ritinėliai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e BS Stamet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e ZL.WBR.5B.80x5.S52\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTrolley with 25% larger bearing 6304.\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cb\u003ebearing 6304 in place of commonly used 6204\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eBearing 6304 has 25% higher load capacity\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eComparative parameters of bearings\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cb\u003e6304 - (dynamic load capacity) - 16,9 kN\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e6204 - (dynamic load capacity) - 13,4 kN\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e🔔PLUS + roll rolled into \"so-called\u003c\/b\u003e \u003cb\u003ehundred\" tight fit + precision seated bearing with Seger (as in classic machines - car parts ) ...\u003c\/b\u003e\u003cb\u003e This is NOT a bearing falling loosely and crimped on the edges of the roller\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e🔔PLUS + Sealier for dirt bearings 2RS\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e⏳ Details for those interested in technical parameters below , requires patient reading 2-3 minutes 😀\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e1.\u003c\/b\u003e \u003cb\u003eRoll made super-precisely on \"so-called.\u003c\/b\u003e \u003cb\u003e\" a hundred according to the old classic method of planting bearings.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCNC boring in the standard \"under bearing\" (0,01 mm accuracy).\u003c\/p\u003e\u003cp\u003eBearing precisely planted (we press them with a press, on the so-called. 'hundred') and fastened to Seger's settlement ring. \u003cb\u003eThis solution eliminates the unfavorable phenomenon of the bearing turning in the roller when it is fitted loosely and crimped.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe bearing in our roller adheres over the entire width of 15 mm of the outer ring of the bearing to the inner surface of the roller\u003c\/b\u003e, not only with a crease on the surface of 1-1,5 mm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrom our roller you can detach the Seger and remove the bearing\u003c\/b\u003e, from the crimped no.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e2.\u003c\/b\u003e \u003cb\u003eOur roller has an enlarged width of 22 mm\u003c\/b\u003e, which gives a larger contact area between the roller and the gate rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e3.\u003c\/b\u003e \u003cb\u003eWe designed and rolled the roller to accommodate a bearing with a larger size of 6304 and a 25% higher than standard load capacity.\u003c\/b\u003e \u003cb\u003eOnly available with us.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003e6 .\u003c\/b\u003e \u003cb\u003eBearing in roll with 2RS seal - black butyl seal rubber - elastomer as in Simmering, not type ZZ - bearing ball cover plate .\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAdditional features in the EXTRA trolley:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cb\u003eenlarged 250 mm platform for greater stability\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ewashers under the nuts - seems like a small detail, but others don't use them even though it's basic for fasteners\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003esocket with additional guide rollers\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eend cap for the gate\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eTrolleys designed using CAD\/CAM software with a calculation module for acting forces and loads\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e.... details below\u003c\/b\u003e\u003c\/p\u003e\u003ch2\u003e5-Roller Trolley Set for Sliding Gate on 80x80x5 mm Profile\u003c\/h2\u003e\u003cp\u003eSymbol: ZL.WBR.5B.80x5.S52\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSet weight: 20.6 kg\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSet intended for:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGate weight:\u003cb\u003e up to 800 kg\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eEntrance opening:\u003cb\u003e 4-7 m\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eEnlarged platform 250, for more stable - wider mounting,\u003c\/b\u003e not basic 180 mm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFor those interested, the European platform standard 10 years ago was a dimension of 210 or 250 mm in larger trolleys\u003c\/b\u003e, the size of 180 mm was \"imposed after cheapness\" by Chinese products from Chinese importers.\u003c\/p\u003e\u003cp\u003eOn explicit request, described in the Notes to Order, we can assemble on platforms 180 if the trolley is to fit the already existing pin spacing (replacement of the old set).\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePlatform with washer under nuts\u003c\/b\u003e - like a trifle, and we give washers only us, only with us.\u003c\/p\u003e\n\u003cp\u003eThe washer under the nut is the standard of fastening products technique - the washer is obvious to everyone under the screw nut, ensures proper pressure and no loosening.\u003c\/p\u003e\u003ch2\u003e2x trolley WBR.5B.80x5.S52\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGate weight: \u003cb\u003eup to 800 kg\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eEntry light: \u003cb\u003e4-7 m\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eRollers: \u003cb\u003e68,5 mm × 22 mm, steel, in the shape of a perfect arc\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlatform: \u003cb\u003eadjustable,\u003c\/b\u003e \u003cb\u003e250 × 120\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eRoller bearing: \u003cb\u003e6304 2RS, fastened with Seger ring\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eCoating: \u003cb\u003egalvanized zinc\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOverrun socket with rollers.\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003egate leaf guidance rollers\u003c\/li\u003e\n\u003cli\u003ewater drainage holes\u003c\/li\u003e\n\u003cli\u003egalvanic coating\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eRemember! \u003c\/b\u003e Mount the socket and roller so that the roller clearly enters the socket (slightly lifting the gate). Thanks to this, the trolleys are relieved when the gate is closed. We know from practice that the gates are closed 99% of the time, at 99% of customers. By relieving the trolleys, you extend their life!\u003c\/p\u003e\u003ch2\u003eOverrun roller with cap and fender, mounted in the running rail.\u003c\/h2\u003e\u003cp\u003eIts task is to support the weight of the gate in the \"locked gate\" state.\u003c\/p\u003e\u003cp\u003eThanks to the fender, the gate stops without additional noise, and the force of \"impact\" is reduced.\u003c\/p\u003e\u003cp\u003eThis is our production inrun roller, in which the roller is mounted on a pin fastened with a Seger ring (not crimped, without protection, as in most rollers on the market). This eliminates the risk of the pin breaking. This gives you the ability to disassemble and replace the roll itself in case of problems.\u003c\/p\u003e\u003cp\u003eMounting screws \"enter\" into a rivet nut with a long thread (10 mm, not like the competition thread only in a 3-4 mm plate), which ensures the stability of the mounting connection.\u003c\/p\u003e\u003cp\u003eStrong weld of the end cap protects against its detachment.\u003c\/p\u003e\u003ch2\u003eTop gripper\u003c\/h2\u003e\u003cp\u003eFree, to choose from (indicate in the comments):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e40 mm (we include this one when none is given in the notes)\u003c\/li\u003e\n\u003cli\u003e60 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe gripper stabilizes the gate frame at the top of the post. Especially useful for modern full gates\u003c\/p\u003e\u003ch2\u003eTop roller with angle\u003c\/h2\u003e\n\u003cp\u003eFree to choose from (indicate in the comments)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e33 mm bearing to 40\/40\/3 catheter (we attach this one when no other is given in the notes)\u003c\/li\u003e\n\u003cli\u003e43 mm bearing for 50\/50\/3 catheter\u003c\/li\u003e\n\u003cli\u003e25 mm every 30\/30\/2 catheter\u003c\/li\u003e\n\u003cli\u003e35 mm for 40\/40\/2 catheter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlastic cap\u003c\/h2\u003e\u003cp\u003eTo be mounted on the other end of the rail - from the lawn side. It protects against dirt and snow, which after getting into the rail and freezing, can adversely affect the smooth operation of the gate.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eReal Polish product\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003emade in Poland from the level of a piece of rod and sheet metal\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e... we are a Polish manufacturer not \"polish brand\" of imported products.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIMPORTANT NOTE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePROFILE IS MEASURED ON THE OUTSIDE\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTHIS IS A RAIL TYPE 80mm x 80mm ... THICKNESS OF THE CUTTER WILL PASS 5mm, RARELY OTHER NP 4 mm\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ePlease check exactly what are the dimensions of your rail (profile). These dimensions are determined by specifying the \u003cb\u003e width of the profile on the outside and the wall thickness (\u003c\/b\u003ethe best caliper)\u003c\/p\u003e\u003cp\u003e\u003cb\u003eThe set includes:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x 5-Roll Adjustable Swing Cart\u003c\/li\u003e\n\u003cli\u003e1 x Overrun socket \u003cb\u003ewith rollers\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Overrun Roller\u003c\/li\u003e\n\u003cli\u003e1 x guide roller with angle (to choose from. All options at the end of the advertisement)\u003c\/li\u003e\n\u003cli\u003etop handle (to choose)\u003c\/li\u003e\n\u003cli\u003eplastic cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWeight of the set 20,6 kg\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePurpose of the set:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGate weight:\u003cb\u003e up to 800 kg\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eEntry light: \u003cb\u003e4-7 m\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBS Stamet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003eZL.WBR.5B.80x5.S52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCustoms tariff code\u003c\/td\u003e\n\u003ctd\u003e87168000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"STAMET","offers":[{"title":"Default Title","offer_id":45742727921724,"sku":"14643848965","price":103.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/2161\/6188\/files\/Set-trolley-roller-for-sliding-gate-80x80-25-Stronger-Bearing.jpg?v=1782894437","url":"https:\/\/market365.lt\/products\/vartu-ritineliu-vezimelis-stumdomiems-vartams-80x80-sustiprinti-guoliai","provider":"Market365","version":"1.0","type":"link"}