{"product_id":"suvirinimo-aparatas-aliuminiui-mig-mag-mma-tig-215a","title":"Suvirinimo aparatas aliuminiui MIG\/MAG\/MMA\/TIG 215A","description":"\u003ch2\u003eTrumpai apie prekę\u003c\/h2\u003e\u003cp\u003ePrekė: Suvirinimo aparatas aliuminiui MIG\/MAG\/MMA\/TIG 215A. Kategorija: Pusiau automatiniai suvirinimo aparatai.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGamintojas:\u003c\/strong\u003e Powermat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModelis:\u003c\/strong\u003e PM-PAS-215L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIlgis:\u003c\/strong\u003e 460 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlotis:\u003c\/strong\u003e 220 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAukštis:\u003c\/strong\u003e 360 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eINVERTER WELDING MACHINE\u003c\/h2\u003e \u003ch2\u003eALUMINIUM WELDING | MIG\/MAG SYNERGY | MIG PULSE | MMA | LIFT TIG | FLUX | IGBT\u003c\/h2\u003e \u003ch2\u003eModel: PM-PAS-215L\u003c\/h2\u003e\u003ch2\u003eEnsure comfortable and precise welding in the workshop, during repairs and assembly work. Electronically controlled semi-automatic welding machine with IGBT technology supports MIG\/MAG, MIG PULSE, MMA, LIFT TIG and FLUX, so you can easily adjust the method to the type of material and task at hand.\u003c\/h2\u003e\u003ch2\u003eLESS SETTING, MORE WELDING\u003c\/h2\u003e \u003cp\u003eWhen you want to start working efficiently, synergistic mode helps you choose the right parameters after choosing the material, gas and wire diameter.\u003c\/p\u003e \u003cp\u003eYou gain support for five welding methods, an LCD panel and the ability to work with both full and FLUX wire.\u003c\/p\u003e\u003ch2\u003eMULTIFUNCTIONAL WELDING IN ONE DEVICE\u003c\/h2\u003e \u003cp\u003eYou don’t have to invest in several different devices. You use MIG\/MAG manual, MIG\/MAG synergistic, MIG PULSE, MMA, LIFT TIG and FLUX methods, choosing the welding method for the material and the work performed.\u003c\/p\u003e \u003ch2\u003eREADY FOR WELDING ALUMINIUM AND STEEL\u003c\/h2\u003e \u003cp\u003eAL MG and AL SI programs enable MIG welding of aluminium alloys. There are also programs for carbon steel, stainless steel, copper and materials intended for soldering.\u003c\/p\u003e \u003ch2\u003eINTUITIVE OPERATION OF PARAMETERS\u003c\/h2\u003e \u003cp\u003eLCD panel, electronic control and synergistic mode make it easy to select settings. With the knob, you can quickly change the parameter values, and the display presents the most important information about the operation of the device on an ongoing basis.\u003c\/p\u003e\u003ch2\u003eWHAT SETS OUR WELDING MACHINE APART?\u003c\/h2\u003e \u003ch2\u003eIGBT TECHNOLOGY\u003c\/h2\u003e \u003cp\u003eIGBT transistors are responsible for electronic control of the welding process. The device uses DC current during all supported methods.\u003c\/p\u003e \u003ch2\u003ePRECISE ADJUSTMENT OF PARAMETERS\u003c\/h2\u003e \u003cp\u003eInductance settings, BURNBACK, HOT START, ARC FORCE and VRD are available. This allows you to adjust the nature of the work to the task at hand.\u003c\/p\u003e \u003ch2\u003eWIRE FEEDER WITH ADJUSTABLE PRESSURE\u003c\/h2\u003e \u003cp\u003eThe adjustable wire feeding mechanism allows you to adjust the pressure to the type of binder. The manual wire feed feature makes it easy to prepare the device before welding.\u003c\/p\u003e\u003ch2\u003eCLEAR LCD CONTROL PANEL\u003c\/h2\u003e \u003cp\u003eElectronic control panel with LCD display provides convenient access to all the most important welding parameters. Two digital display fields present, among others, current, voltage, wire feed speed and additional functions settings.\u003c\/p\u003e \u003cp\u003eThe central knob and function buttons allow you to quickly change parameters and approve them without complicated operation. Thanks to this, the configuration of the device runs smoothly both when changing the welding method and the material.\u003c\/p\u003e\u003ch2\u003eWELDING CAPACITY UP TO 215 A\u003c\/h2\u003e \u003cp\u003eThe maximum welding current of 215 A in MIG\/MAG and LIFT TIG methods allows you to perform a wide range of workshop, assembly and repair work.\u003c\/p\u003e \u003cp\u003eThe 60% duty cycle allows welding at full current of 215 A, while at 100% duty cycle the device reaches 166,5 A.\u003c\/p\u003e \u003cp\u003eIGBT technology is responsible for the stable operation of the power source, and the 230 V power supply allows you to use the device in many workplaces.\u003c\/p\u003e\u003ch2\u003eFOCUS ON WELDING, NOT SETTINGS\u003c\/h2\u003e \u003cp\u003eSynergistic mode helps you get your device up and running faster, and you can focus on making the weld. You spend more time working instead of looking for the right settings.\u003c\/p\u003e\u003ch2\u003eTECHNICAL DATA\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePower supply: 230 V \/ 50 Hz\u003c\/li\u003e \u003cli\u003eTechnology: IGBT\u003c\/li\u003e \u003cli\u003eWelding Current: DC\u003c\/li\u003e \u003cli\u003eProtection Class: IP21S\u003c\/li\u003e \u003cli\u003eIdle Voltage: 62 V\u003c\/li\u003e \u003cli\u003eWelding methods: MIG\/MAG Manual, MIG\/MAG Synergistic, MIG PULSE, MMA, LIFT TIG, FLUX\u003c\/li\u003e \u003cli\u003eMaterials: Steel, stainless steel, aluminum and alloys, copper and alloys, soldering materials\u003c\/li\u003e \u003cli\u003eWire diameters: 0,8 \/ 0,9 \/ 1,0 \/ 1,2 mm\u003c\/li\u003e \u003cli\u003eMMA electrode diameters: 1,6 to 5 mm\u003c\/li\u003e \u003cli\u003eOperating Modes: 2T\/4T\/SPOT\u003c\/li\u003e \u003cli\u003eMIG\/MAG: 30 – 215 A | 15,5 – 24,8 V | 9 kVA | 60%: 215 A | 100%: 166,5 A\u003c\/li\u003e \u003cli\u003eMMA: 25 – 190 A | 21 – 27,6 V | 8,8 kVA | 60%: 190 A | 100%: 147,2 A\u003c\/li\u003e \u003cli\u003eTIG LIFT: 15 – 215 A | 10,6 – 18,8 V | 6,7 kVA | 60%: 215 A | 100%: 166,5 A\u003c\/li\u003e \u003cli\u003eAdjustment: Inductance (-10 to +10), BURNBACK (0–1), SPOT (0–3), HOT START (0–10), ARC FORCE (0–10), VRD (ON\/OFF)\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eCONTENTS OF THE SET\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePowermat PM-PAS-215L inverter welder\u003c\/li\u003e \u003cli\u003eEURO MIG\/MAG welding torch – 395 cm\u003c\/li\u003e \u003cli\u003eMMA electrode holder – 215 cm\u003c\/li\u003e \u003cli\u003eBulk holder – 205 cm\u003c\/li\u003e \u003cli\u003eWelding mask\u003c\/li\u003e \u003cli\u003eBrush with hammer\u003c\/li\u003e \u003cli\u003eCurrent terminal 0,8 mm – 1 pc.\u003c\/li\u003e \u003cli\u003eCurrent terminal 1,0 mm – 1 pc.\u003c\/li\u003e \u003cli\u003eWire feeder roller 1,0\/1,2 mm type U\u003c\/li\u003e \u003cli\u003eUniversal key\u003c\/li\u003e \u003cli\u003eFlexible Teflon cable\u003c\/li\u003e \u003cli\u003eUser manual\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eREADY FOR VARIOUS CHALLENGES IN THE WORKSHOP\u003c\/h2\u003e \u003cp\u003eFrom structural steel to aluminum and stainless steel, one device allows you to perform a wide variety of jobs. You gain more freedom without having to change equipment.\u003c\/p\u003e\u003ch2\u003eWELDING OF ALUMINIUM\u003c\/h2\u003e \u003cp\u003eThe device enables welding of aluminum and its alloys using MIG\/MAG method using dedicated AL MG and AL SI programs. MIG PULSE mode provides better control over the welding lake, which makes it easier to make welds in aluminum materials.\u003c\/p\u003e \u003cp\u003eThe AL MG program is designed for welding aluminum-magnesium alloys, while AL SI supports aluminum-silicon alloys. The device works with wires with a diameter of 0,8, 0,9, 1,0 and 1,2 mm, allowing the selection of the appropriate welding material.\u003c\/p\u003e \u003cp\u003eFor working with aluminum, it is recommended to use a feeder roller with a U-groove, which ensures the correct handling of soft wire. Thanks to the combination of synergistic programs, MIG PULSE and properly selected settings, the device works well when welding aluminum elements of different thicknesses.\u003c\/p\u003e\u003ch2\u003eMIG\/MAG WELDING AND TIG LIFT WELDING\u003c\/h2\u003e \u003cp\u003eMIG\/MAG provides efficient welding of carbon steel, stainless steel, aluminium and its alloys, copper and soldering materials. There is a manual or synergistic mode to choose from, which makes it easier to select parameters after selecting the material, gas and wire diameter.\u003c\/p\u003e \u003cp\u003eThe MIG\/MAG current range from 30 to 215 A enables welding of both thin sheets and thicker structural elements. The device supports wires with a diameter of 0,8, 0,9, 1,0 and 1,2 mm, and AL MG, AL SI and MIG PULSE programs facilitate welding of aluminum and stainless steel.\u003c\/p\u003e \u003cp\u003eThe LIFT TIG method allows you to make precise and aesthetic welds using a TIG handle with a gas valve. Arching is done by touching the material with a tungsten electrode and its slight elevation, without the use of high frequency ignition.\u003c\/p\u003e \u003cp\u003eThe TIG current range from 15 to 215 A allows you to adjust the parameters to different material thicknesses, providing great control over the welding process during workshop, assembly and repair work.\u003c\/p\u003e\u003ch2\u003eMMA WELDING\u003c\/h2\u003e \u003cp\u003eThe MMA method allows welding with wrapped electrodes with a diameter of 1,6 to 5 mm, making it suitable for workshop, assembly, repair and field work. The welding current range from 25 to 190 A allows you to adjust the parameters to different material thicknesses and types of welds.\u003c\/p\u003e \u003cp\u003eThe HOT START function temporarily increases the current during arc ignition, making it easier to start welding and reducing the risk of sticking the electrode. ARC FORCE dynamically stabilizes the arc during short circuit of the electrode with the welding lake, improving the smoothness of the weld.\u003c\/p\u003e \u003cp\u003eThe VRD function reduces the output voltage in the unloaded state to about 20 V, increasing safety during interruptions. All settings are available directly from the control panel, which allows you to quickly adjust the device to the current welding conditions.\u003c\/p\u003e\u003ch2\u003eIGBT TECHNOLOGY\u003c\/h2\u003e \u003cp\u003eModern IGBT technology is responsible for electronic control of the welding process and stable operation of the device in every supported method. The use of IGBT transistors enables precise control of welding parameters and quick response of the system to load changes.\u003c\/p\u003e \u003cp\u003eThe power source operates using DC current, providing a stable arc during MIG\/MAG, MMA, LIFT TIG and FLUX welding. This translates into greater repeatability of settings and more convenient control over the welding process.\u003c\/p\u003e\u003ch2\u003eWIRE FEEDING SYSTEM\u003c\/h2\u003e \u003cp\u003eThe internal wire feeding mechanism allows convenient installation of the spool and setting the appropriate resistance of its unwinding. Thanks to this, the wire is fed evenly to the welding torch during MIG\/MAG or FLUX operation.\u003c\/p\u003e \u003cp\u003eThe adjustable roller pressure allows you to adjust the feeding force to the type and diameter of the wire used. Correct positioning reduces the risk of roller slipping, wire deformation and increased handling resistance.\u003c\/p\u003e \u003cp\u003eThe device works with V-groove rollers for steel wire and U-groove rollers for soft aluminum wire. This makes it easier to prepare the welding machine to work with different materials and improves feed stability.\u003c\/p\u003e \u003cp\u003eThe manual wire feed function allows you to run the wire through the EURO handle without starting welding. Just hold down the wire diameter selection button on the panel to efficiently prepare the device for operation.\u003c\/p\u003e\u003ch2\u003eEURO CONNECTOR\u003c\/h2\u003e \u003cp\u003eThe device is equipped with a EURO connector, which allows you to quickly connect and disconnect the welding torch without stripping the housing.\u003c\/p\u003e \u003cp\u003eThis solution facilitates the replacement of the cable and reduces the time of preparing the equipment for work.\u003c\/p\u003e \u003cp\u003eThe EURO standard is widely used, so it is easier to choose compatible handles and accessories. You gain more comfortable handling and more freedom during everyday use of the welding machine.\u003c\/p\u003e\u003ch2\u003ePOSSIBILITIES OF THE DEVICE\u003c\/h2\u003e \u003cp\u003e\u003cb\u003eMATERIALS PROGRAMS\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCO₂ – welding of carbon steels in carbon dioxide shield.\u003c\/li\u003e \u003cli\u003eMIX – welding of carbon steels and stainless steels in gas mixtures.\u003c\/li\u003e \u003cli\u003eAL MG – a program for welding aluminum-magnesium alloys.\u003c\/li\u003e \u003cli\u003eAL SI – a program for welding aluminum-silicon alloys.\u003c\/li\u003e \u003cli\u003eFLUX – a program for welding with self-shielding wire without gas.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eSPECIAL FUNCTIONS\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHOT START – temporarily increases the current during arcing using the MMA method.\u003c\/li\u003e \u003cli\u003eARC FORCE – stabilizes the arc and reduces its extinguishing during MMA welding.\u003c\/li\u003e \u003cli\u003eVRD (ON\/OFF) – lowers the output voltage without load to about 20 V.\u003c\/li\u003e \u003cli\u003eInductance regulation – changes the nature of the arc and the number of chippings during MIG\/MAG welding.\u003c\/li\u003e \u003cli\u003eBURNBACK – regulates the length of wire burning after welding.\u003c\/li\u003e \u003cli\u003eSPOT – allows you to make spot welds with adjustable welding time.\u003c\/li\u003e \u003cli\u003e2T\/4T – choosing how to control the welding torch button.\u003c\/li\u003e \u003cli\u003eManual wire feed – makes it easy to guide the wire through the handle without starting welding.\u003c\/li\u003e \u003cli\u003ePolarity change – fast switching between MIG\/MAG welding with gas and FLUX.\u003c\/li\u003e \u003c\/ul\u003e\u003ch2\u003eREADY FOR VARIOUS WELDING TASKS\u003c\/h2\u003e \u003cp\u003eOne device provides MIG\/MAG, MMA, LIFT TIG, FLUX and MIG PULSE, so you do not have to limit yourself to one method.\u003c\/p\u003e \u003cp\u003eSupport for aluminum, stainless steel and carbon steel allows you to use the welding machine during many workshop and assembly works.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e \u003ch2\u003eDOES THE WELDING MACHINE ALLOW WELDING ALUMINUM?\u003c\/h2\u003e \u003cp\u003eYes. The device has AL MG and AL SI programs designed for MIG\/MAG welding of aluminum alloys. In addition, MIG PULSE mode facilitates control over the welding process of aluminum.\u003c\/p\u003e \u003ch2\u003eCAN I WELD WITHOUT A GAS CYLINDER?\u003c\/h2\u003e \u003cp\u003eYes. The welding machine supports the FLUX method, i.e. self-shielding wire welding. In this mode, change the polarity according to the device instructions.\u003c\/p\u003e \u003ch2\u003eWHAT WELDING METHODS DOES THE DEVICE SUPPORT?\u003c\/h2\u003e \u003cp\u003eThe PM-PAS-215L supports MIG\/MAG Manual, MIG\/MAG Synergistic, MIG PULSE, MMA, LIFT TIG and FLUX methods.\u003c\/p\u003e \u003ch2\u003eWHAT WIRE AND ELECTRODE DIAMETERS ARE SUPPORTED?\u003c\/h2\u003e \u003cp\u003eThe device works with wires with a diameter of 0,8 mm, 0,9 mm, 1,0 mm and 1,2 mm. In the MMA method electrodes with a diameter of 1,6 to 5 mm are supported.\u003c\/p\u003e \u003ch2\u003eDOES THE WELDING MACHINE HAVE SYNERGISTIC MODE?\u003c\/h2\u003e \u003cp\u003eYes. MIG\/MAG Synergistic mode automatically selects welding parameters after selecting the material, gas and wire diameter, making it easier to prepare the device for operation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eGroup\u003c\/th\u003e\n\u003cth\u003eName\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003enew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eInvoice\u003c\/td\u003e\n\u003ctd\u003eWith VAT invoice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePowermat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e9 kVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eSupply voltage (V)\u003c\/td\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDuty cycle time\u003c\/td\u003e\n\u003ctd\u003e60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eMaximum electrode diameter\u003c\/td\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWire diameter (mm)\u003c\/td\u003e\n\u003ctd\u003e0,8-1,2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eDevice weight\u003c\/td\u003e\n\u003ctd\u003e8.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding range\u003c\/td\u003e\n\u003ctd\u003e15–215 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e360 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e460 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eLength of ground cable\u003c\/td\u003e\n\u003ctd\u003e202 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding cable length\u003c\/td\u003e\n\u003ctd\u003e395 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eProduct weight with unit packaging\u003c\/td\u003e\n\u003ctd\u003e13.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eManufacturer code\u003c\/td\u003e\n\u003ctd\u003ePM1555\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eEAN (GTIN)\u003c\/td\u003e\n\u003ctd\u003e5900748404267\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePM-PAS-215L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eWelding methods\u003c\/td\u003e\n\u003ctd\u003eMIG\/MAG,MMA,TIG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParametry\u003c\/td\u003e\n\u003ctd\u003eAdditional features\u003c\/td\u003e\n\u003ctd\u003ewelding mask included,infinitely adjustable welding current,EURO handle,LCD display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"extremopolska_pl","offers":[{"title":"Default Title","offer_id":46136097013820,"sku":"18763808607","price":273.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/2161\/6188\/files\/MIGOMAT-INVERTER-WELDING-MACHINE-FOR-ALUMINIUM-215A-MIG-MAG-MMA-TIG-LIFT_10cdaebb-8a44-41a0-ad51-21f8f4f97eaa.jpg?v=1788873515","url":"https:\/\/market365.lt\/products\/suvirinimo-aparatas-aliuminiui-mig-mag-mma-tig-215a","provider":"Market365","version":"1.0","type":"link"}