Žalvarinis rutulinis vožtuvas 1/4" Gz x 1/4" žarnai vandens filtrui, osmosui

Trumpai apie prekę

Prekė: Žalvarinis rutulinis vožtuvas 1/4" Gz x 1/4" žarnai vandens filtrui, osmosui. Kategorija: Atvirkštinio osmoso sistemos.

• Gamintojas: Green Filter
• Modelis: VM14

Metal ball valve dedicated to chrome water connections Aquafilter series: FT03, FT06 and FT07. The Aquafilter SEWBV1414 valve has a 1/4 inch water connection thread (standard for these connections) and a 1/4 inch flexible hose connection (white and colored KTPE hose series).

The valve allows you to disconnect the water supply to the filter for the duration of its servicing or when there is another need (e.g. longer absence).

The ball internal mechanism ensures long-term durability. Attachment of the hose and its sealing occur by moving it through the unscrewed nut (included), sliding on the connector protruding from the valve and then firmly winding the nut.

Metal ball valve typically used to connect the water supply to the filter.

Standard used together with a water connection of the selected diameter with which it forms a tee that allows you to plug into most water installations. Aquafilter's SEWBV1414 valve fits all water connections, regardless of the manufacturer who uses a 1/4-inch mounting hole.

The valve has an external thread with a diameter of 1/4 inch (approx. 11 mm). On the side of the hose there is a "mushroom" on which the hose is pressed and the whole twist should be turned with the nut included in the set (example installation of the hose on the valve can be found in our installation instructions for the reverse osmosis filter). The connection of the hose with the valve does not require additional sealing, while the connection of the valve with the water connection should be sealed, for example, with Teflon tape.

Metal ball valve typically used to connect the water supply to the filter. Allows direct connection of 1/4 inch (6,35 mm) hose used in domestic water filters with 1/4 inch water system (e.g. with metal water connections).

The valve has an external thread with a diameter of 1/4 inch (about 13 mm). On the side of the 1/4 inch hose there is a "mushroom" on which the hose is pressed and the whole twist should be turned with the nut included in the set (example installation of the hose on the valve can be found in our installation instructions for the reverse osmosis filter).

The connection of the hose to the valve does not require additional sealing, while the connection of the valve to the water connection should be sealed, e.g. Teflon tape.

Specifications