Vandens minkštinimo stotis HYDRO PLUS 22 Monosfera, Lenkijos gamintojas

Trumpai apie prekę

Prekė: Vandens minkštinimo stotis HYDRO PLUS 22 Monosfera, Lenkijos gamintojas. Kategorija: Vandens filtrai ir minkštikliai.

• Gamintojas: Hydro
• Modelis: Hydro Plus 22
• Talpa: 22 l

⭐⭐⭐⭐⭐

WATER SOFTENER HYDRO PLUS 22 PREMIUM MONOSPHERIC STATION

⭐⭐⭐⭐⭐

Hydro Plus is Technika Wody's proprietary line of water softeners and filters. They are manufactured by us in Poland according to strictly defined specifications, of which we are truly proud. It is located on the control head.

Very long warranty periods: 5 years for the head/electronics, 8 years for the bed and 10 years for the housing and pressure cylinder!

The devices are equipped with a special monospheric resin (from the renowned American manufacturer Dow or the German Lewatit S1567 produced without the use of solvents by Bayer) and a modern, fully automatic control head with a menu in Polish and a low salt level alarm.

All solutions offered in Hydro Plus softeners have been repeatedly tested and are certified by the most important hygiene and industry organizations. Durability, efficiency, safety and savings – these are the priorities of Hydro Plus softeners.

The lifespan of the resin bed, when used correctly, is up to several years. Service throughout Poland!

✅ Application:

• Water softening in houses and apartments, especially for 3- and 4-person households
• Protection of installations, household appliances, fittings and heat exchangers

✅ Advantages:

• Reduction of salt and water consumption during regeneration by up to 30%
• Extended lifespan of the deposit thanks to perfectly even monospheric grains
• Protection of fittings, CO installations, household appliances and pipes against stone
• Lower heating bills by maintaining installation efficiency
• Less detergent consumption (approx. 50% less)
• Better condition of the skin and hair – no dryness or irritation
• Improving the taste of food
• No need for descaling agents
• Possibility of space-saving management thanks to the connection adapter
• Stable operation even with very hard water
• Very long term of protection - check in the GUARANTEES tab

✅ Hydro Plus water softeners can handle any, even extremely hard water. They use a special ion exchange resin – monospheric with perfectly even grains (a renowned American manufacturer Dow or the German Lewatit S1567 produced without the use of solvents by Bayer – resins especially recommended for households). Thanks to this, Hydro Plus devices are characterized by the highest softening efficiency, extended life of the deposit and lower by about 30%. demand for water and salt during regeneration in relation to softeners with traditional bed (polyphoric – resin grains of various sizes).

✅ Hydro Plus softeners are also larger deposits than in the case of standard solutions and better resin rinsing thanks to the use of the highest possible pressure cylinders.

✅The Hydro Plus devices are equipped with a modern and fully automatic Hydro Plus volumetric controller with a large backlit screen, built-in low salt alarm, internal water meter (pulse calibration possible) and in Polish support. The possibility of choosing one of as many as 6 types of deposit regeneration and manual adjustment of the duration of its individual cycles.

✅ The head counts the water intake and starts the regeneration process of the deposit at the right time. The standard also includes a by-pass with the possibility of mixing raw water with softened water and additional anti-flood protection in the form of a float brine valve.

✅In the standard by-pass with connections (angle or straight), mixing raw water with softened (Smart Soft) and two anti-flood protection. Additionally, the Easy Start function (quick start) and Top Hygienic, guaranteeing rinsing of the deposit even during a longer lack of water intake.

In addition, each Hydro Plus control head is marked with the PZH CERT symbol, which certifies the recommendation of the National Institute of Hygiene.

Soft water means higher comfort of life, real savings, protection of health and the environment. With water softeners:

• bathroom fixtures, sinks, bathtubs and showers are clean and well-groomed effortlessly
• ovens, washing machines, dishwashers, kettles and coffee makers are protected and work seamlessly
• CO installation and radiators retain their original efficiency, thanks to which we pay less for gas
• diameter of pipes in the house does not decrease due to sediments of boiler stone
• We use much less cleaning and washing agents (approx. 50%. )
• save on means intended for removing tarnish from stone
• clothes stretch faster and are nice touch
• hair and skin are moisturized, there are no irritations and allergies
• dishes release a deeper taste

✔ Use parameters – amount of soft water between regenerations:

• 12 dH – 6,0 m³
• 15 dH – 4,8 m³
• 18 dH – 4,0 m³
• 21 dH – 3,6 m³
• 24 dH – 3,0 m³
• 27 dH – 2,7 m³
• 30 dH – 2,4 m³
• 33 dH – 2,2 m³
• 36 dH – 2,0 m³
• 39 dH – 1,8 m³

✔ Driver and functions

• 6 types of deposit regeneration
• Internal water meter (pulse calibration)
• Low salt alarm
• Smart Soft function – water hardness adjustment
• Top Hygienic function – rinsing the deposit during a longer break in collection
• Easy Start
• Screen with backlight
• Support for in Polish

✔ Security and construction

• Double anti-flood protection
• Housing and pressure vessel with long-term warranty
• Possibility of connecting an external chlorinating adapter

✔ Transport and assembly

• Possibility of transport also in a supine position
• Shock and impact resistant housing
• Simple installation according to instructions
• Full telephone support of the service

⭐⭐⭐⭐⭐

Specifications and performance of the Hydro Plus 22: water softener

• connection: 1"
• type of ion exchange resin: Bayer monospheric Dow USA or Lewatit S1567
• quantity of resin in litres: 22
• automatic volumetric control head Hydro Plus
• dimensions: 32 cm (width) x 101 cm (height) x 55 cm (depth)
• Pressure cylinder 10x30" Eurotrol
• Power Consumption: 9 W
• Operating pressure: 1,4 – 8,6 bar
• Operating temperature: 1 – 39 C
• maximum working flow: 1,4 m3/h
• efficiency between regen. at 15 dH: 4,8 m3 of water
• salt consumption for regeneration: about 3 kg
• water consumption for regeneration: about 120 liters
• pressure drop: 0,15 bar
• Salt storage capacity: 60 kg
• height at which the water inlet/outlet is located - 79 cm
• Polish in the driver menu
• driver screen with backlight
• built-in low salt alarm
• water meter with the possibility of pulse calibration
• regulation of water softening by mixing raw water with softened water (Smart Soft function) - angular connections (default) or straight (on request)
• original bypass valve by-pass equipped with a connection lock with the possibility of quick removal from the installation
• connection adapter for connecting the softener without by-pass (to a depth of "save" about 20 cm)
• double anti-flood protection: brine float valve and overflow on the tank housing
• Top Hygienic hygienic protection – guarantees rinsing of the deposit during a long lack of water intake
• Easy Start function - the ability to run the softener on the principle of "plug & play"
• 48-hour maintenance of the controller settings in case of power failure
• Detailed instructions for connecting, starting and using the softener
• full telephone support of our service during the start-up of the device and its use

We have all consumables and spare parts for the offered water softeners in our permanent offer.

1) Hydro Plus water softeners are equipped with a low salt level alarm . We activate it once in the control head menu, and after each salt refill we enter how many kilograms we have added. The softener recalculates the regeneration of the resin and if there are fewer tablets left in the tank than for three rinses, it will display an appropriate message. Thanks to this modern solution, we no longer have to look inside the station for inspection. For Hydro Plus softeners, two bags of tablet salt (50 kg) should be enough for 4 to 6 months of operation.

2) To increase hygiene, Hydro Plus water softeners can be equipped with a head-controlled adapter that gently chlorinates the bed during regeneration . This function is especially recommended if you have your own water supply or if the softener needs to be disconnected from the power supply frequently for longer periods.

3) The set includes a by-pass valve with angle (default) or straight (on request) connections. The device is also factory-equipped with a 1" GZ connection adapter enabling the connection of a softener without the use of a bypass - this will save approximately 20 cm of space in depth.

Each device sold by us is equipped with a set of documents confirming its authenticity and high quality of the components used. Please pay special attention to the hologram along with the unique serial number. It is located on the side wall of the control head or on the inside of the salt throw flap.

Each device in the Hydro Plus series has:

1. Water Technology hologram with unique serial number
2. Warranty card with specified model and serial number of the device compatible with the hologram
3. Detailed, dedicated instructions for connecting, starting and using the softener
4. A special sticker for the housing with the most important usage information, contact details of Technika Wody and a place to save the installation date

Our experienced service technicians are always at your disposal.

WE ADD FREE TO EACH SOFTENER PURCHASED

• very effective, efficient and hygienic 10" filter station (connections 1") for installation at the water softener - it removes all mechanical impurities (first stage of filtration - bacteriostatic foam cartridge) and chlorine, phenols and pesticides (second stage of filtration - carbon cartridge, which additionally clarifies water, improve its taste and aroma)
• stock of replacement cartridges for a double filter station for several years of operation (8 foam cartridges 20 mik. and 4 activated carbon cartridges) - recommended cartridge replacement every 6 months
• Wrench for unscrewing bodies and mounting brackets for triple filter
• accurate, droplet tester for testing water hardness, which is enough for several dozen measurements
• 2 bags of tablet salt for deposit regeneration (total 50 kg)
• original bypass valve by-pass
• 5-meter flexible hose for drainage of regenerative rinses for sewerage with mounting clamp

Only by using two 10-inch carbon filters (or one 20-inch) can we achieve a satisfactory effect of purifying water from the chemicals contained in it.

In addition, thanks to the modular design of the filter station, you can freely install the filter bodies included in its composition. For example, you can install all three filters before the softener or just one in front of the device (with foam pre-insert) and the other two (with carbon cartridges) behind it. This saves space for installation in a place where it is limited.

Specifications