Vandens minkštinimo filtras 10" su jonų mainų derva ST10 iw235

Trumpai apie prekę

Prekė: Vandens minkštinimo filtras 10" su jonų mainų derva ST10 iw235. Kategorija: Filtrai ir vandens minkštikliai.

• Gamintojas: Klarwod
• Modelis: ST
• Talpa: 1 l

Are you fed up with white residue on your faucets, limescale in your kettle and stains on your ceramics ? The cause is very often hard water containing large amounts of calcium and magnesium ions.

KLARWOD ST10 is a 10" softening cartridge with ion exchange resin that reduces the minerals responsible for water hardness and helps limit scale formation.

This is a simple solution for a standard 10" filter housing that can improve the comfort of everyday water use and reduce scale build-up on fittings and devices.

WHY IS IT WORTH IT?

✓ Reduces water hardness – the ion exchange resin removes calcium and magnesium ions from water, which are responsible for limescale formation.

✓ Reduces scale build-up – helps protect fittings, appliances and components in contact with water.

✓ Fewer white stains – softened water reduces the characteristic deposits visible on faucets, ceramics and dishes.

✓ Flow rate up to 6 l/min – suitable for point water treatment systems.

✓ Standard 10" size – fits into appropriate bodies designed for standard 10" inserts.

✓ Operating temperature 1–30°C – the cartridge is designed for cold water filtration.

✓ Simple replacement without rebuilding the installation – when worn out, the insert is removed from the body and replaced with a new one.

When you buy from a-term – the best seller on Allegro , you choose proven water treatment products and professional service.

MOST IMPORTANT PARAMETERS

• Manufacturer: KLARWOD
• Model: ST10
• Type: softening insert
• Technology: ion exchange
• Bed: ion exchange resin – cation exchanger
• Reduced components: calcium and magnesium ions
• Insert size: 10"
• Height: 251 ±1.5 mm
• Diameter: 60 ±1 mm
• Maximum flow: 6 l/min
• Operating temperature: 1–30°C
• Maximum pressure: 6 bar
• Medium: cold water
• Purpose: reducing water hardness and limiting limescale formation

IMPORTANT ABOUT PERFORMANCE

The actual capacity of the softener cartridge is not a fixed number of liters .

It depends primarily on:

• hardness of the inlet water,
• the amount of water consumed,
• flow speed,
• operating conditions.

The harder the water and the greater the consumption, the faster the ion exchange capacity of the bed is exhausted.

HOW DOES ST10 WORK?

Inside the cartridge there is an ion exchange resin – cation exchanger .

As water flows through the bed, ion exchange occurs: calcium and magnesium ions, which are responsible for water hardness and scale formation, are retained by the resin.

The effect is a reduction in water hardness and therefore a lower tendency to form white deposits and scale.

APPLICATION

KLARWOD ST10 can be used in point cold water treatment systems, m.in : In:

• standard 10" filter housings
• under-sink systems equipped with a 10" body
• appropriate multi-stage filtration sets,
• selected reverse osmosis systems using standard 10" housings.

The insert is especially useful where the problem is:

• hard water,
• stone in the kettle,
• white deposits on batteries,
• stains on ceramics,
• deposits on dishes,
• scale deposited on elements in contact with water.

CONTENT OF THE OFFER

The offer includes:

• 1 × KLARWOD ST10 softening insert
• size 10"
• cartridge filled with ion exchange resin

IMPORTANT BEFORE INSTALLATION

Before purchasing, check whether your body is designed for standard 10" inserts with a diameter of approximately 60 mm .

The insert should only be used for cold water in the range of 1–30°C .

During the exchange:

• close the water supply to the filter,
• reduce the pressure in the body,
• unscrew the filter housing,
• remove the used cartridge,
• clean the inside of the body,
• check the condition of the housing seal,
• insert the new cartridge in the correct position,
• turn the body,
• slowly open the water supply,
• check the tightness of the connections,
• Rinse a fresh cartridge before normal use.

Do not exceed 6 bar pressure or 30°C water temperature .

In multi-stage systems, it is worth using mechanical filtration before the ST10 cartridge to limit the inflow of sand, rust and sediments into the softening bed.

a-term guarantees the highest quality and fast shipping , so the new cartridge can quickly go directly to your filtration system.

You do not need to immediately install a large central softening station if the problem is confined to one water intake point.

KLARWOD ST10 is a simple solution for a standard 10" filter, which, thanks to ion exchange resin, reduces calcium and magnesium responsible for water hardness.

10", up to 6 l/min, temperature 1–30°C – a small contribution that can noticeably reduce the problem of limescale in everyday water use.

The softening cartridge is filled with a cationite resin with a capacity of 0,7 liters.

The purpose of this cartridge is to remove calcium and magnet from the water.

Total capacity is 3000 liters of water with a hardness of 1,5st F peak 4 liters/min,

Its life is 6 months.

The cartridge prevents stains on kitchen and bathroom ceramics.

Very high filter performance.

The product has a PZH hygienic certificate.

Product specifications

- Dimensions of the filter 10" (width 60mm x height 250mm)

Thickness 6,cm

Lifetime up to 2.000 Liters

- Durability approx. 1-6 months - depending on the quality and degree of water pollution. -

Recommended by the manufacturer replacement every 1 - 2 months.

- Performance 6 liters per min.

manufacturer: klarwod

.

Mounting with a gasket up

Specifications