Vandens filtras po kriaukle Waterdrop G3P600 su atvirkštinio osmoso sistema

Trumpai apie prekę

Prekė: Vandens filtras po kriaukle Waterdrop G3P600 su atvirkštinio osmoso sistema. Kategorija: Kraniniai ir po kriaukle montuojami vandens filtrai.

• Gamintojas: Waterdrop
• Modelis: G3P600

Waterdrop G3P600 is a reverse osmosis (RO) water filter designed for installation under the sink in a tankless design. The system purifies water at the time of collection and feeds it directly from the home installation, ensuring constant access to filtered water without storage and without performance drops.

Effective water purification

The system uses a filter membrane with an accuracy of 0,0001 μm, which allows the reduction of dissolved solids (TDS), selected heavy metals and chemical impurities. 8-stage filtration combines different stages of purification, which translates into stable water quality for drinking and cooking.

Tankless design

The G3P600 operates without a pressure vessel. The water is filtered on an ongoing basis and fed immediately after cleaning, which allows you to maintain constant water quality parameters and simplifies installation under the sink.

Fast and constant water flow

With a capacity of 600 GPD, or about 2270 liters per day, the system enables efficient filling of glasses, bottles and dishes – the pouring time of one glass is about 8 seconds. The constant flow facilitates the daily use of filtered water in the kitchen.

Faucet with TDS display and filter consumption indicator

The set includes a dedicated tap with a display showing the TDS level and filter status. This allows ongoing control of water parameters and convenient planning of filter cartridge replacement.

Simple replacement of filter cartridges

Filter cartridges are replaced from the front, by rotating the module, without disassembling the device and without disconnecting the water supply. Information about filter consumption helps maintain optimal system performance with minimal handling.

Certified quality and safety of materials

The system meets NSF/ANSI 42, 53, 58 and 372 standards, confirming material compatibility and filtration parameters. Materials in contact with water are BPA-free.

NSF/ANSI 58 and 372 certificates

The Waterdrop reverse osmosis system is NSF/ANSI 58 certified for TDS reduction and NSF/ANSI 372 certified for lead-free.

Based on tests carried out in accordance with NSF/ANSI 53 and 58 standards, the degree of reduction of benzene, methoxychlor and lindane was found to be up to 99%.

The system has been tested and certified by IAPMO R&T in accordance with NSF/ANSI 58 for TDS reduction and NSF/ANSI 372 (≤0,25% lead).

Fast flow 600 GPD

The large capacity of 600 GPD provides faster flow, which is also more stable and durable. Filling a glass of water takes only 8 seconds.

8-degree deep filtration

With 8-stage deep filtration, it can reduce chlorine, taste and smell, chloramine, stone, turbidity, cysts and many heavy metals such as hexavalent chromium while improving the taste of water.

Less spending, better choice

With a 2:1 ratio of clean water to sewage, this tankless reverse osmosis system can produce two glasses of purified water while producing only one glass of wastewater. This helps you save money on your water bills in some way.

Intelligent display

The reverse osmosis system is equipped with an intelligent battery display with TDS monitoring and filter life detection function, so you can assess the water quality and filter life at a glance.

*Please note that TDS levels may vary depending on the quality of the local water.

Treeless design

Thanks to the tankless design, the device effectively prevents secondary contamination with bacteria, while freeing up 70% of the space under the sink.

Easy installation and replacement

The Waterdrop G3P600 reverse osmosis system can be installed in 30 minutes and the filter can be replaced in just 2 seconds.

There is no need to move the system or use tools.

Simple connection

Familiarize yourself with this diagram and remember that you need to drill a hole in the countertop to place a smart battery (no need to do this step if there is already a hole in the countertop). In addition, an adapter will be installed on the home water pipe to connect to the RO system sewage pipe and water inlet pipe.

Electricity is required for the reverse osmosis system to operate.

We do not recommend using well water as a source for our RO systems. We do not recommend connecting without tank RO to a refrigerator, ice maker or salt-based softener.

It is strongly recommended to install our RO system with components provided by Waterdrop. Installing a system with parts or accessories that are not supplied by Waterdrop may result in system malfunction or shorten the life of the system/filters.

A sip of nature doesn't cost much

The remineralization filter can be connected to all types of under-sink water filter systems. By adding one filter, you can enjoy remineralization water with a refreshing taste.

Additional information

Weight: 14,70 kg

Dimensions: 46,00 × 14,40 × 45,03 cm

Series: G

Type: Undercounter

Color: White

Model number: WD-G3P600

Filtration efficiency: 600 GPD / approx. 2270 l per day

The ratio of purified water to waste water: 2:1

Filling time of the glass 250 ml: approx. 8 seconds

Filter life: G3-N1CF – 6 months | G3-N3CB – 12 months | G3P600-RO – 24 months

Rated voltage: 230 V / AC

Rated frequency: 50 Hz

Certificates: NSF/ANSI 42, 58 and 372

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Kind	under-sink
Parametry	Brand	Waterdrop
Parametry	Dominant color	white
Parametry	Model	G3P600
Parametry	Product weight with unit packaging	17 kg
Parametry	Manufacturer code	B0BKP8LNR3-PW
Parametry	EAN (GTIN)	840814187616
Parametry	Packaging status	original