Trijų fazių įtampos stabilizatorius oro kondicionieriui, šilumos siurbliui AVR 10000VA

Trumpai apie prekę

Prekė: Trijų fazių įtampos stabilizatorius oro kondicionieriui, šilumos siurbliui AVR 10000VA. Kategorija: Elektros generatoriai.

• Gamintojas: Volt Polska
• Modelis: AVR PRO 10000VA
• Įtampa: 230 V

three-phase automatic voltage stabilizer 10000W (10kW) 3% SERVO

Three-phase mains voltage stabilizer AVR PRO 10000VA 3% 3F combines the features of 2 devices: voltage regulator and surge protector.

The main function is to automatically adjust the voltage fed at the stabilizer input. The device improves the parameters of the voltage fed to m.in. from a local network or generator. It also suppresses interference introduced into the electrical network by other devices.

The stabilizer operates in three-phase mode, i.e. it equalizes too high or too low input voltage and gives the output voltage after stabilization

• Computer sets, servers, routers, modems, network components

• Electronic equipment, e.g. amplifiers and audio mixers, loudspeakers, music equipment, TV sets, stereo towers, CD-DVD players, receivers, etc.

• Generator sets

• Office equipment (computers, monitors, printers)

• Household appliances (refrigerators, microwaves, dishwashers, stoves, freezers)

• Engines, compressors, windmills

• Incandescent, LED and fluorescent lighting

• Printers and cash registers

• Lawn mowers, vacuum cleaners

• Power tools (drills, saws, grinders, machine tools, etc. )

• CO furnaces and pumps

VOLT AVR PRO 3-F 10000 3% SERVO - automatic voltage stabilizer 380VAC:

• three-phase
• power 10000VA
• combines the functionality of a voltage stabilizer with an anti-overvoltage device
• precision 3% - built-in servo
• efficiency >98%
• improves the parameters of the voltage fed, e.g. from the local network or from the generator
• suppresses some of the interference entering the electrical network by connected interference
• automatically raises or lowers power supply to 380V AC
• Input voltage: 225-450V
• mode change switch: 1 phase / 3 phase
• overvoltage overload protection, temperature protection
• equipped with 4 transport wheels (front with lock)
• polish manual.

The stabilizer operates in three-phase mode, i.e. it equalizes too high or too low input voltage and gives the output voltage after stabilization.

AVR PRO 3-F is an advanced automatic voltage stabilizer with servomechanism controlling the operation of the autotransformer.

The result is a very low output voltage tolerance (3%).

AVR PRO 3-F 3% SERVO stabilizer - application:

• computer sets, servers, routers, modems, network components
• RTV equipment, e.g. amplifiers and audio mixers, loudspeakers, music equipment, TV sets, stereo towers, CD-DVD players, receivers, etc.

Some devices with too large voltage fluctuations stop working - then AVR should be used.

Automatic voltage stabilizer VOLT PRO AVR 3-F 10000 3% SERVO combines the features of 2 devices: voltage regulator and surge protector.

The main function is to automatically adjust the voltage fed at the stabilizer input.

The device improves the parameters of the voltage fed to m.in. from a local network or generator. It also suppresses interference introduced into the electrical network by other devices.

A typical application is to maintain a constant supply voltage, regardless of the load and the fluctuations in the supply voltage, between the generator and the receiver.

The stabilizer automatically lowers too high and raises too low voltage to the correct level of 380 AVC.

High precision 3% (tolerance) deserves attention - for most devices it is 8-10%.

If the voltage is constantly increasing until the safe value is exceeded, the stabilizer disconnects the device from the network, thus protecting the receiver from damage.

The built-in controls in AVR indicate:

• normal working condition
• overvoltage protection
• undervoltage protection
• temperature protection
• Delay time indicator

Specification:

• Rated Power: 10000 VA
• Input voltage: 225÷450V
• Output voltage: 380V
• minimum starting voltage: 225V (+/- 5V)
• Output voltage frequency: 50Hz
• tolerance / precision: 3%
• Delay time: 6s/180s
• Efficiency: >98%
• cooling start: at 30% rated power
• cooling off: at 20% rated power
• Operating mode change switch: 1 phase / 3 phase
• overload protection (fuse)
• short-circuit protection
• thermal protection
• Lower voltage protection
• upper voltage protection
• Operating temperature: 0-45 degrees Celsius
• dimensions: 545x230x47 mm
• Weight: 35kg

• Automatic voltage stabilizer VOLT AVR PRO 10000 3% SERVO
• instruction manual in Polish

Important information about the use of voltage stabilizer:

• avoid overloading the stabilizer above its maximum power
• Some devices equipped with motors or compressors need very high starting power. Make sure that the total nominal and overload (start-up) power of the devices connected to the stabilizer does not exceed its maximum power
• check that the receiver voltage is the same as the stabilizer
• make sure that the input voltage (e.g. mains) is within the input voltage range of the stabilizer and the output voltage is appropriate for the voltage range of the connected receiver
• store the stabilizer in appropriate conditions (m.in.: well ventilated room, device not exposed to direct sunlight, protected from contact with children, away from water, moisture, oils or other wet substances, away from flammable substances)
• first connect the load to the stabilizer, start the AVR, and then start the device connected to it
• connection of the device should be made after reading the instructions or by a person with appropriate permissions, e.g. electrics.

Before using it, be sure to read the entire user manual of the device.

Specifications