Tinklo jungiklis BCS-IP5/E-S-II, PoE, 5 IP kameroms, 90 W, IP55 apsauga

Trumpai apie prekę

Prekė: Tinklo jungiklis BCS-IP5/E-S-II, PoE, 5 IP kameroms, 90 W, IP55 apsauga. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: BCS
• Modelis: 1473

BCS

5-Port PoE Switch

Series: BCS Power

Model: BCS-IP5/E-S-II

BCS-IP5-E/S-II is a set for powering IP cameras of CCTV, equipped with a 10/100 Mbps PoE switch with 5 PoE ports and 1 uplink port. The device is used to efficiently power and connect IP cameras and other network devices compliant with PoE 802.3at/af and PoE PASSIVE standards. Thanks to the high supply voltage (55 V) after all pairs of UTP cable, it enables stable power supply on long routes with minimal voltage loss.

The most important advantages and features

• Power up to 5 PoE devices compatible with 802.3at/af and PoE PASSIVE
• 55V DC supply voltage transmitted after all 4 pairs of UTP cable
• Maximum power 40W per PoE port, 90W total for the whole set
• Additional screw connector for charging 55 V power to other devices
• Simple installation with no setup required
• Possibility to turn off the power supply on selected PoE ports (using jumper)
• Weatherproof housing, IP55 rating
• High efficiency of the power supply (93%) minimizing heating
• Surge, short-circuit and thermal protection

Detailed technical specification

Ports and standards

• 6 RJ45 ports: 5 PoE ports 10/100 Mbps (LAN 1 to 5), 1 uplink port (LAN 6, without PoE)
• PoE ports support: PoE PASSIVE (up to 40W), 802.3at (up to 30W), 802.3af (up to 15W)
• POE PINS: 1,2 (V-), 3,6 (V+), 4,5 (V+), 7,8 (V-)

Power supply and electrical parameters

• Input supply voltage: 190 – 260 V AC, 50 Hz
• PoE Output Voltage: 55 V DC ± 2%
• Maximum continuous power: 90 W
• Protections: fuse 3,15 A, overload (3 A), thermal (TSD 130°C)
• Electronic surge and short-circuit protection

Network functions and management

• Plug & play, no need for configuration
• PoE on/off capability on LAN ports 1 to 4 (jumper)
• LED signaling for power, link and PoE presence on ports

Physical parameters and assembly

• Housing: durable plastic, RAL7035 grey colour
• Degree of protection: IP55 (dust and water resistance)
• Mounting: Wall-mounted with included mounting brackets
• Dimensions: 160 × 110 × 70 mm
• Weight: 0,43 kg

Other functions and features

• Rubber cable caps (2 × 29 mm) for cable inputs
• Additional screw connector (CON2) for 55 V DC power consumption
• Support for cables terminated with RJ-45 plugs

Explanation of technical abbreviations and terms

• PoE (Power over Ethernet) – technology for transmitting electrical power along with network data over a standard Ethernet network cable, which allows you to power devices without the need for additional power cables.
• 802.3af/at – PoE standards specifying the maximum power transmitted by the cable; 802.3af to 15,4 W, 802.3at (PoE+) to 30 W per port.
• PoE PASSIVE – PoE power supply without protocol negotiations, constant voltage (here 55 V) transmitted over all pairs of wires.
• RJ45 – standard plug and socket used in Ethernet networks.
• Uplink – a port used to connect to a higher network level (e.g. with a router or other switch).
• IP55 – a standard determining the degree of protection of the housing against dust and water (partial dustproof, protection against water jets).
• TSD (Thermal Shutdown) – thermal protection that turns off the device in case of overheating (here above 130°C).
• Fuse – fuse with flux wire reacting to current overload.

BCS-IP5-E/S-II is a reliable and easy-to-install kit for powering and connecting IP cameras in surveillance systems. With high PoE voltage and power transmission over all cable pairs, the device provides stable power over long distances without voltage drops. Robust, weather-resistant housing and advanced protection guarantee durability and safety of work. This solution is ideal for both professional and home use, offering flexibility and convenience without the need for complicated setup.

Specifications