Tinklo jungiklis Atte IPB-5-10A-S4, 5 PoE prievadai, 100 Mbps Fast Ethernet

Trumpai apie prekę

Prekė: Tinklo jungiklis Atte IPB-5-10A-S4, 5 PoE prievadai, 100 Mbps Fast Ethernet. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: Atte
• Modelis: IPB-5-10A-S4

Set for 5 IP cameras, in external housing ABOX-S4, PoE switch 6 port 10/100Mbps (5xPoE + 1xUplink), PoE power supply after 4 pairs, integrated power supply 55V 90W

New, improved version of IPB-5-10-S4!

In the new version with the letter A in the name, the PoE power supply is transmitted over all pairs of UTP cable, which reduces voltage drops. Increased cross-section and increased power supply voltage up to 55VDC allows you to maintain the correct voltage value at the end of longer tracks for higher power PoE receivers. The above properties are directly applicable when extending or branching lines using active PoE IP extenders, e.g. xPoE-3-11A and xPoE-4-11A-HS.

Differences between IPB-5-10-S4 and IPB-5-10A-S4:

• Power Supply Voltage: 55VDC (previously 48VDC)
• Power supply: 90W (previously 75W)
• PoE power supply: transmitted after 4 pairs UTP twisted pair (previously after 2 pairs)

Key features and functions:

• small size
• possibility of powering 5 PoE 802.3at/af or PASSIVE receivers
• possibility of switching off the power supply on selected PoE ports
• clear optical indication of power supply and data transmission status
• up to 40W of power per single PoE port (total 90W of power budget)
• easy and quick start-up without the need to configure parameters
• high efficiency of the integrated power supply (>90%)
• additional screw connector makes it easy to "pick up" 55VDC power to other devices
• easy expansion and scaling of the system by attaching additional xPoE / IP and IPB / IPUPS series switches
• possibility of maintaining the supply of cables inside the housing
• cable entry through rubber cap mounted in the housing: 2x29mm
• possibility of introducing wires with earned plugs (after cutting the end cap)
• included power cable and 2 handles for mounting the housing without violating the degree of protection IP55

The IPB-5-10A-S4 was designed as a complete integrated power solution for small IP CCTV systems. The device is suitable for installation right out of the box, and the housing with IP55 resistance class gives freedom of installation inside or outside the building. High-quality plastic provides resistance to UV radiation and other adverse weather conditions.

PoE switch sets are designed to work with IP cameras and other network devices powered in the PoE 802.3at/af and PoE PASSIVE standards. The "Basic" version (IPB) means that the device belongs to the product line with basic functionality and as simple a design as possible.

Technical data:

Port functions 2/2

Fuse fuse immediate 3,15A

Probably overvoltage

• LAN ports
• 6 RJ45 10/100Mbps ports (auto MDI-MDIX, auto-negotiation)
• 5 x PoE, 1 x UPLINK
• Port functions 1/2
• LAN 1 ... LAN 5:
• PoE OUTPUT (receiver power): PASSIVE (up to 40W), 802.3at (up to 30W), 802.3af (up to 15W)
• PoE PINS: 1,2 (V-) 3,6 (V+) 4,5 (V+) 7,8 (V-)
• LAN 6:
• UPLINK (no PoE power)
• CON2 (+) (-): 55VDC power output
• CON1 AC_IN: 230VAC mains power supply
• Efficiency 93% @90W
• Output voltage 55V +/- 2%, available on CON2 screw connector
• Power supply 90 W - continuous
• Power supply voltage 190 ... 260 VAC, 50 Hz
• Power supply input protection
• Power supply output protection
• Electronic overload protection at level 3A (automatic return after short circuit)
• Surge protection
• Thermal protection of the power supply TSD (thermal shutdown) 130°C - requires restart of the power supply
• Port security
• LAN 1 ... LAN 6: Surge protection
• LAN 1...LAN 5: Short-circuit protection 0,75A @25°C, 0,45A @50°C (requires power restart)
• Work signal
• LED_AC (white) - AC mains voltage
• LED PWR (white) - DC output voltage
• LED LAN 1 ... LAN 6 (green) - link and data transmission
• LED in RJ45 LAN connectors 1 ... LAN 5 (red) - PoE power supply on port
• Power control on ports
• PoE jumpers (LAN 1 ... LAN 4):
• PoE OFF - no jumper (LED inside port does not light up)
• PoE ATTACHED - jumper attached (LED inside port lights up)
• LAN 5 - no power control (PoE always present)
• Housing design
• Housing ABOX-S4
• Halogen-free, UV-resistant material
• Colour grey (RAL7035)
• Mounted rubber caps 2 x 29 mm
• Housing mounting Wall-mounted, mounting brackets
• Protection rating IP55
• Working temperature -25 ... +50°C
• Dimensions (S x W x G) 110 x 160 x 70 mm
• Weight 0,43 kg

Specifications