Televizoriaus laikiklis 26–65" universalus reguliuojamas nuo viršaus žemyn

Trumpai apie prekę

Prekė: Televizoriaus laikiklis 26–65" universalus reguliuojamas nuo viršaus žemyn. Kategorija: Rankenos.

• Gamintojas: TAMDEL
• Modelis: ETX65

40 kg lifting capacity, 10°/10° tilt, distance from the wall 5 cm — simple and durable, without unnecessary

✅ Will it Fit Your TV?

TV Size: 26-65" | Max. Load Capacity: 40 kg | Max. VESA: 400x400 mm

How to Check Your VESA?

Look at the back of your TV and measure the distance between the mounting holes — horizontally (width) x vertically (height) in millimeters. This is your VESA standard.

📐 Example: holes 400 mm apart horizontally and 300 mm apart vertically = VESA 400x300 ✅

Supported VESA Standards:

100x100 - 200x100 - 200x200 - 200x300 - 200x400 - 300x200 - 300x300 - 300x400 - 400x200 - 400x300 - 400x400

🔩 WIDE AND REINFORCED WALL PLATE

The handle can hold a weight of up to 40 kg! That’s more than 4 full packs of mineral water at a time!

The handle is made of cold rolled steel, powder coated with a reinforced, wide wall plate.

The mechanical lock will prevent the screen from accidentally knocking off the handle.

📐 TILT ADJUSTMENT - WATCH WITHOUT GLARE

Slope 10° down and up – one movement and no more glare from the window and lamp. Screws with butterflies will lock the screen in the desired position.

Adjustment without tools!

🔧 ASSEMBLE YOURSELF IN 30 MINUTES

Short and clear instructions, a set of pins and screws - assembly is quick and without complicated steps. Drill, screw and you're done.

The included level makes you hang straight the first time. In the set you will find all the screws and pegs — just a drill and 30 minutes.

📦 INCLUDED

✔ Handle TAMDEL, model ETX65

✔ Set of screws and dowels:

• 4x M10x50 dowel + M6x50 screws

✔ Screws for mounting TV - the most popular sizes:

• M5x20
• M6x20
• M8x30

✔ Assembly instructions in Polish

⚠ Note: The kit includes standard M5/M6/M8 screws. For unusual TV models (e.g. some Samsungs) may require a different screw size — available at any metal store or construction market.

📊 TECHNICAL PARAMETERS

• Supports TV sizes: 26-65"
• Max. load: 40 kg
• Max. VESA: 400 x 400 mm
• Tilt: top 10°, bottom 10°
• TV distance from the wall: fixed 50 mm
• Construction: Cold rolled steel

❓ FAQ – QUICK ANSWERS

Does this fit my TV?

Check the VESA on the back panel — measure the distance between the mounting holes. If it is in the range of 100x100 to 400x400 mm and the TV weighs up to 40 kg — it fits.

Can I install this myself?

Yes. Drill, 30 minutes, instructions included. You don’t need a team or expertise.

What screws are needed for TV?

The set includes standard M5/M6/M8 screws, which are suitable for most TVs. For some Samsung, Philips or Sharp models, you may need a different size. You can buy them for a few dollars at any construction market.

Will the TV fall by itself over time?

No. The tilt angle is tightened with a butterfly screw and is permanently locked. No self-falling.

Is it suitable for cardboard-gypsum (GK) wall?

Mounting on the GK possible only in the frame / profile or with certified anchors for the GK with appropriate load capacity, and with heavier TV recommended installation in the supporting wall.

Specifications