Suvirinimo aparatas WELDMAN MIG 200A 230V, MMA, TIG Lift, 3 in 1

Trumpai apie prekę

Prekė: Suvirinimo aparatas WELDMAN MIG 200A 230V, MMA, TIG Lift, 3 in 1. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Weldman
• Modelis: 103 102
• Ilgis: 581 mm
• Plotis: 281 mm
• Aukštis: 421 mm

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

The Weldman MISTRAL MIG 200 welding machine is an inverter semi-automatic welding machine designed for welding by:

• MIG/MAG - arc hot melt electrode in the shield of inert or active gases
• MMA - welding with wrapped electrodes
• TIG LIFT - welding with a special handle with a valve, arcing is then carried out by lightly rubbing the non-melting electrode against the welded material.
• FLUX / FCAW - welding with self-shielding wire.

The Weldman MISTRAL MIG 200 welding machine is used for welding:

✔ low alloy steel

✔ low carbon steel

✔ alloy steel

The device has been designed for all kinds of welding work in automotive, locksmith, repair, industrial, factories, etc.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

The welding machine has a simple and user-friendly control panel.

Setting parameters is carried out by means of a panel on which welding current displays and control knobs are placed, among others:

• Wire feed rate,
• Regulation of current voltage.
• Diodes indicating the operation of the device

This allows for easy and quick setting and reading of all welding parameters.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

ADVANTAGES AND FUNCTIONS OF THE WELDING MACHINE:

⭐PROFESSIONAL WIRE FEEDER - enables precise extension of the welding wire excluding its slippage, guarantees stability and continuity of operation of the device.

⭐ EUROCONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

⭐SOCKET - output 5-pin control for TIG handle

⭐ TWO GAS CONNECTIONS - The welding machine as one of the few on the market has 2 gas connections on the rear panel, allowing simultaneous connection of two cylinders

✅ OVERLOAD SWITCH - protection against overheating of the device. general protections were applied such as protection against excessive voltage, excessive current, overheating of the device

✅ CHANGE OF POLARITY MIG/MAG WELDING IN THE MIDDLE OF THE DEVICE - The device has the ability to change the polarity of welding inside the device through specially dedicated screw connections. The connection is durable and reliable

✅ AUTOMATIC COOLING SYSTEM WITH FAN

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

⭐ WORK IN INDUSTRY - thanks to its high quality and multifunctionality, the device can be used in professional and industrial work.

⭐ EASY TO USE - The welding machine is equipped with an easy-to-use control panel and LCD display, so it can be used even by amateurs.

⭐ INVERTER TECHNOLOGY IGBT - is a modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology has the effect of significantly extending the reliable operation of welding equipment.

⭐The device is designed for both Semi-professional and Professional users

➡ The device is equipped with overload protection, which increases its reliability.

❄ The device has a fan cooling system which significantly increases its efficiency.

✔ REPAIR WORKSHOP

✔ LOCKSMITH WORKSHOP

✔ OF ALL BODYWORK REPAIRS

✔ ASSEMBLY SERVICES

✔ FARMS

✔ HOMEWORK

AND WHEREVER RELIABILITY MATTERS!

The welder is equipped with a professional wire feeder, which guarantees stability and continuity of operation of the device.

The 2-roll feeder allows precise extension of the welding wire excluding its slippage.

Above the wire feeder is placed the EXTEND WIRE button, which allows you to quickly insert the wire into the holder without letting go of gas before welding.

HANDLE WITH EURO CONNECTOR

The welder has a EURO socket for MIG welding wire. The socket allows you to quickly change the handle to the same standard and, most importantly, allows you to change the polarity for welding with FLUX self-shielding wire.

The warranty service is carried out in the door-to-door system without transport costs on the part of the user.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

Fits MMA welding machines, or any other one with a suitable connector.

Universal, robust welding torch / torch with valve TIG-17V-30 Type (WP-17-V or under another name SR17V) fits most welding equipment available on the market.

It gives the possibility of TIG welding (in argon shield), when connected to an ordinary MMA inverter welding machine (for buffer electrodes).

He is completely armed and ready to go. Ergonomic handle provides high comfort of work. The handle has a high-quality cover, protecting the wires from abrasion.

TIG handle may vary slightly from the picture shown depending on delivery.

The graphic shows the difference in gas outflow between a handle armed with a current connector and a gas lens.

At our other auctions you can buy TIG weapon components such as: lens and current connector

Migomat company WELDMAN is a device with a wide range of applications, designed as an inverter power source enabling welding with hot melt wire in a gas shield MIG/MAG or FCAW self-shielding wire (after changing polarity), welding with a buffer electrode MMA, as well as the TIG Lift method.

✔ MIG/MAG welding

Arc welding in gas shields is one of the most commonly used processes for the manufacture of welded structures. The semi-automatic welding process involves melting the edges of the welded object and the material of the hot melt electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire and the welded detail, in an inert or active gas shield.

✔ Welding MMA

In the MMA method, a wrapped electrode is used, consisting of a metal core covered with a sheath. An electric arc is produced between the end of the electrode and the welded material. Arching is created by touching the end of the electrode to the welded material.

✔ Welding TIG DC

In the TIG (Tungsten Inert Gas) method, the electric arc is ignitioned in an inert gas (argon) shield between the welded element and the non-melting electrode, made of pure tungsten or tungsten with additives. In TIG DC Lift mode, the arc glow occurs when the electrode comes into contact with the welded element. In TIG DC mode, the current is constant.

✔ Self-shielding wire welding FCAW

Thanks to the polarity change function, it is possible to weld without shielding gas, with FCAW self-shielding wire. The wire is designed for general production work, also in field conditions, and for welding structures that are not subject to impact requirements. Welding current DC(-).

Self-shielding powder wire fi 0,8mm/1kg E71T-GS is designed for welding ordinary carbon steels and increased strength not exceeding 510 MPa.

It is used in prefabrication, construction, tank production, agricultural equipment, etc. Used in both production and repair of equipment.

SELF-SHIELDED WIRE IS AVAILABLE SEPARATELY AT OUR AUCTIONS AND IN OTHER SETS.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

TO MEET CUSTOMERS, BASED ON OUR MANY YEARS OF EXPERIENCE, WE HAVE CREATED PROFESSIONAL SETS FOR YOU, THANKS TO WHICH WE PROVIDE YOU WITH EQUIPMENT READY FOR USE IMMEDIATELY AFTER CONNECTING TO ELECTRICITY.

⌚ SAVE YOUR TIME ⌚

BUY INCLUDED AND WE'LL TAKE CARE OF THE REST!

JOIN THE BEST - START YOUR WELDING ADVENTURE WITH US!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖

TECHNICAL DATA:

PHYSICAL PARAMETERS

• Wire spool size: 5 kg
• Degree of protection: IP 21S
• Isolation class : F
• Weight of the device: 16 kg
• Overall dimensions L x W x H: 58x28x42 cm

TECHNICAL PARAMETERS

• Idle voltage: 56 V
• Power at work 100%: 155 A
• Power at work 60%: 200 A
• Wire diameter: 0.8 - 1.2

Welding parameters MIG

• Power at work 100%: 155 A
• Power at work 60%: 200 A
• Welding current voltage 100% 24V
• Welding current voltage 60% 21,8V

MMA welding parameters

• Power at work 100%: 155 A
• Power at work 60%: 200 A
• Welding current voltage 100% - 28V
• Welding current voltage 60% - 26,2V

Welding parameters TIG DC LIFT

• Power at work 100%: 155 A
• Power at work 60%: 200 A
• Welding current voltage 100% - 18V
• Welding current voltage 60% - 16,2V

POWER SUPPLY PARAMETERS

• Power supply network protection: 20 A
• Rated supply voltage: 230 V; 50Hz (1ph)

ADDITIONAL FUNCTIONS

• FLUX: YES
• TIG Lift: YES
• ARC FORCE TAK

• Welder WELDMAN MISTRAL MIG 200 - 1pc.
• Welding torch MB15/3m - 1pc
• TIG LIFT SR-17V holder - 4 m - 1pcs
• Electrode holder - 2 m - 1 pcs.
• Bulk cable - 2 m - 1 pcs.
• Instruction manual in Polish
• Guarantee card

(Set of 1)

Specifications