Suvirinimo aparatas SYNER 220A, MIG/MAG, MMA, TIG, FLUX, 2 vnt.

Trumpai apie prekę

Prekė: Suvirinimo aparatas SYNER 220A, MIG/MAG, MMA, TIG, FLUX, 2 vnt.. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: RED TECHNIC
• Modelis: RTMSTF0002
• Ilgis: 440 mm
• Plotis: 210 mm
• Aukštis: 380 mm

Brand: RED Technic

Model: RTMSTF0002

As a result of our cooperation with modern factories investing in new forms of technology, for the future global needs of the twenty-first century, a new brand RED TECHNIC was created, not only with modern design, but also minimalism and strong quality in relation to price.

• Model: RTMSTF0002
• Power Supply: 230 V / 50 Hz
• Power Consumption MIG / MAG: 6.6 kVA
• Power Consumption TIG: 5.0 kVA
• Power Consumption MMA: 6.5 kVA
• Welding Methods: MIG-MAG FLUX / MMA / LIFT-TIG
• Welding Current Range MIG-MAG: 30 - 220 [A] (depends on wire thickness)
• Welding Current Range SYN-MIG: 30 - 220 [A] (depends on wire thickness)
• Welding Current Range MMA: 25 - 220 [A]
• Welding Current Range TIG: 15 - 220 [A]
• Welding Current Duty Cycle 100%: (MIG-MAG - 193A)
• Welding Current Duty Cycle 60%: (MIG-MAG - 220 A)
• Welding Current Duty Cycle 100%: (MMA - 174 A)
• Welding Current Duty Cycle 60%: (MMA - 230 A)
• Welding Current Duty Cycle 100%: (TIG-LIFT - 193 A)
• Welding Current Duty Cycle 60%: (TIG-LIFT - 220 A)
• Supported Wire Diameters: 0.6 / 0.8 / 0.9 / 1.0 [mm]
• Supported Electrode Diameters: 1.6 mm - 5 mm
• Welding Voltage MIG-MAG: 15.5 - 24 [V]
• Welding Voltage MMA / TIG: 20.8 - 28 [V]
• Operating Modes: Manual / Semi-Automatic / Synergic
• Supported Wire Spools: Max. up to 5 kg
• Insulation Class: F
• Mains Protection: 25 A (MIG), 32 A (MMA), 25 A (TIG)
• Protection Rating: IP21S
• Dimensions: 44 x 21 x 38 [cm] (L / W / H)
• Net Weight: 9.75 kg

• mass handle (-): 200 cm
• MMA electrode holder (+): 215 cm / plug diameter 13 mm 35-50
• EURO MIG / MAG handle: 250 cm
• Current terminals: 2x 0,8; 1x 1,0 [mm]
• wire-operating roll (double-sided): 0,8 mm and 1,0 mm; type U
• welding mask
• brush with hammer
• instruction manual in Polish and English
• universal key

Semi-automatic welding machine brand RED Technic RTMSTF0002 has a very wide range of use. It enables efficient welding of various types of material groups in a wide range of material thicknesses. The IGBT transistors used have a beneficial effect on lower electricity consumption, greater resistance to interference and voltage drops, and good arc characteristics.

The control panel is now even easier to operate, and the operator has quick access to all functions. This has a positive effect on ergonomics and work efficiency in the plant.

The device has a synergic welding function, thanks to which it is possible to obtain the highest quality weld when welding any weldable materials - especially those made of stainless steel and aluminum.

The electronics of the device are based on IGBT transistors combining the advantages of two types of transistors, the ease of control of field transistors and high breakdown voltage and the switching speed of bipolar transistors. The welding current is very stable, which guarantees a perfect weld. Thanks to IGBT technology, the device is lighter and more energy-efficient.

The RTMSTF0002 is a welding machine based on high-performance IGBT transistors. Migomat is equipped with a cooling fan, electronic systems and other components, as well as a thermal sensor to protect the device from overheating.

High efficiency and efficient cooling

Thanks to the use of IGBT transistor technology the efficiency of the device is up to 60%.

Feeding wire fully automatic.

Built-in features for easy work

• HOT START (0 - 10), popularly known as hot start, allows by temporarily increasing the welding current above the value set by the welder. HOT START works at the moment of arcing and is designed to prevent the electrode from sticking to the material. It is a great convenience when lighting the electrode.
• ANTI STICK (automatically) cuts off/minimizes welding voltage and current in case of short circuit of the electrode with the welded material. ANTI STICK allows the welder to detach the electrode more easily.
• ARC FORCE (0 - 10) stabilizes the arc regardless of its length. By reducing the value of the function, it gives a soft arc and a smaller depth of melt, while increasing the value of the function causes deeper melting and the possibility of welding with a short arc. At the highest value for the ARC FORCE function, it is possible to "press the electrode into a lake of molten metal and burn the material through.

Additional comfort and advantages are provided by:

• Synergic mode (SYN MIG)- a function that allows you to set automatic parameter selection
• No need for shielding gases with FLUX function - convenient when using self-shielding wires
• Manual selection of wire thickness for relevant parameters and automatic ranges
• Manual selection of welding control (two-bar - 2T / four-bar - 4T / spot welding - SPT)
• Selection of automatic welding parameters for gas type, no shielding gas and for welding aluminum
• CO2 function - when welding in a FeC/Co2 carbon dioxide gas shield
• MIX function - for welding in FeC/ArCo2E308 Ar98 sheath
• FLUX function - for welding with self-shielding wires E308 Ar98
• AL function - for welding aluminum alloys with magnesium in argon sheath
• Inductance adjustment (-10 - (+10) allows you to optimize the arc characteristics depending on the thickness of the welded sheet metal and welding methods and conditions. The function is useful when welding thin steel sheets, preventing them from burning out and when soldering galvanized sheets. Changing the inductance value also reduces the amount of welding chips
• Burnback function (0 - 10) - wire burn height adjustment. This adjustment controls the short period of time for which the wire feeder will continue to work after stopping the main button of the welding torch.
• SPOT function allowing spot welding with adjustment from 0 - 3 seconds

The 2-roll feeder allows for precise extension of the welding wire, excluding its slippage.

Mobility of the device

The lightweight design along with the stable aluminum handle allows for easy movement of the entire device.

MIG/MAG welding

MIG/MAG welding is one of the most widely used welding processes. But what exactly is behind it? It all depends on the choice of matching shielding gases and binders, up to the properties of different types of welding arcs.

MIG/MAG welding is also known as arc welding of metals.

Where is this welding method used?

MIG/MAG welding processes can be used extremely universally. They are used, among others, in the metalworking industry, in the construction of steel structures and tanks, shipbuilding and in the automotive industry. MIG/MAG processes allow welding of elements from different materials, with different thicknesses and geometries. MIG welding is particularly suitable for non-ferrous metals: aluminum, magnesium, copper and titanium. The MAG method is mainly used for welding non-alloy, low-alloy and high-alloy steels.

Advantages of MIG/MAG welding:

• high melting efficiency,
• lack of slag,
• easy ignition of the welding arc,
• good suitability for mechanized and automated welding,
• high welding speed with good weld quality,
• good suitability for use in forced and difficult positions,
• low cost of binders.

MMA welding

Arc welding with a wrapped electrode is also called the MMA (Manual Arc Welding) method and it is the oldest and most universal method of arc welding.

In the MMA method, a wrapped electrode is used, which consists of a metal core covered with a compressed sheath. An electric arc is produced between the end of the electrode and the welded material. The arc glow is contact by touching the end of the electrode to the welded material. The electrode melts and drops of molten metal electrodes are transferred through the arc to a liquid lake of welded metal forming a weld after cooling. The welder pushes the electrode as it melts into the welded object to maintain a constant-length arc and at the same time moves its melting end along the welding line. The melting sheath of the electrode emits gases that protect the liquid metal from the influence of the atmosphere and then solidifies and forms a slag on the surface of the lake, which protects the solidifying metal of the weld from the influence of the environment. After moving the electrode away from the welded object, the electric arc stops and the welding process is interrupted. After laying one stitch, the slag should be mechanically removed.

The main difference from other welding methods is that in the MMA method the electrode is shortened. In the TIG and MIG/MAG method, the length of the electrode remains unchanged at all times and the distance between the handle and the welded element is constant at all times. In the MMA method, in order to maintain a constant distance between the electrode and the welding lake, the electrode holder must be moved towards the welded element at all times, which means that the welder's skills play a special role.

TIG welding

TIG welding is a method that allows to obtain the highest quality welds. The welding arc glows between a high temperature resistant, non-melting tungsten electrode and a welded element. The inert gas from which the method is named produces an anaerobic atmosphere and prevents the chemical reactions of the liquid welding lake. As a result, smooth, even and non-porous welds are created. The binder is supplied manually or from a wire feeder.

TIG welding is possible for all weldable metals. The largest range of applications are stainless steels and non-ferrous metals, such as aluminium, copper and brass. TIG is primarily used to make the weld ridge layer, because the welds are clean and pore-free, and thus tolerate dynamic loads well.

Thanks to the massive bearing fan, the machine will be cooled very quickly in case of thermal overload.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	RED TECHNIC
Parametry	Power consumption	6.6 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Maximum electrode diameter	5 mm
Parametry	Wire diameter (mm)	0,6-1,0
Parametry	Device weight	9.75 kg
Parametry	Welding range	30–220 A
Parametry	Height	380 mm
Parametry	Length	440 mm
Parametry	Width	210 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	390 cm
Parametry	Product weight with unit packaging	14.15 kg
Parametry	Manufacturer code	RTMSTF0002
Parametry	EAN (GTIN)	5904067441767
Parametry	Model	RTMSTF0002
Parametry	Welding methods	MIG/MAG,MMA,TIG
Parametry	Additional features	welding mask included,infinitely adjustable welding current,EURO handle,LCD display