Suvirinimo aparatas SHERMAN DIGIMIG MIG 200 SYNERGIC, TIG, MMA, 200A, rinkinys

Trumpai apie prekę

Prekė: Suvirinimo aparatas SHERMAN DIGIMIG MIG 200 SYNERGIC, TIG, MMA, 200A, rinkinys. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: SET1-7812300
• Ilgis: 480 mm
• Plotis: 210 mm
• Aukštis: 330 mm

SHERMAN DIGIMIG 200 SYNERGIC

Brand: SHERMAN | Welding methods: MIG, MMA, TIG LIFT | Power supply: 230V | Welding current: 200A | Efficiency: 45%

• full free post-purchase support
• You can call us at any time and we will help you set the parameters and operate the device

Synergistic welding machine DIGIMIG 200 SYNERGIC is used for manual welding of steel and non-ferrous metals.

Allows welding by methods

• MMA (wrapped electrode),
• TIG Lift ,
• MIG/MAG .

Thanks to the change of polarity, the device allows welding using the MIG/MAG method using both standard wires in the protective gas shield and self-shielded powder wires.

The welder allows you to connect a Spool Gun (SG) handle with a mini wire feeder mounted in it and a D100 spool of steel or colored wire. Digital control allows for easy adjustment of parameters, characteristics and dynamics of the arc.

The device has memory of the last setting, i.e. after turning it off and re-enabling it, the last set parameters are restored.

The use of synergistic settings for ordinary steel and aluminum alloys in the welding machine significantly simplifies its operation and allows for use by people with less experience and hobbyists.

TECHNICAL DATA

• Power supply voltage: AC 230V 50Hz
• Maximum power consumption: 6,6 kVA
• Rated welding current/work cycle: MIG: 200A / 45%; MMA: 180A / 60%; TIG: 200A / 60%
• Nominal voltage without load 65 V (9V with VRD)
• Spool diameters with wire: 100mm, 200mm
• Maximum power consumption: MIG: 33 A; MMA: 33 A; TIG: 24 A
• Weight: 13 kg
• Dimensions [mm]: 480 x 210 x 330
• Degree of protection: IP21

PARAMETER ADJUSTMENT RANGES

• Welding current: MIG: 30 – 200 A; MMA: 20 – 180 A; TIG:10 – 200 A
• Welding voltage: MIG: 17,5 – 24,7 V
• Wire feed speed: 2 – 15 m/min
• Inductance: -10 – +10%
• Wire burning time 0 – 10
• Commuting speed of feeder 0 – 10
• Welding voltage correction -5 – +5 V
• ARC FORCE (MMA): 0 – 10 A
• HOT START (MMA) 0 – 10 A

DEGREE OF PROTECTION

IP determines the degree to which the device is resistant to the ingress of solid and water contaminants. IP21 means that the device is adapted to work in closed rooms.

IGBT TECHNOLOGY

Modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and the speed of switching bipolar transistors. The use of IGBT technology has an impact on significantly extending the reliable operation of welding equipment.

PROTECTION AGAINST OVERHEATING

The IGBT module is protected from overheating by a protective installation that turns off the welding circuit of the device. After a few minutes, the welding machine is cooled to a temperature allowing it to be switched on again.

WORK CYCLE

The work cycle is based on a 10-minute period. The 45% duty cycle means that after 4,5 minutes of operation of the device, a 6,5-minute break is required. 100% duty cycle means that the device can work continuously, without interruptions

MMA

A method in which a wrapped electrode is used, consisting of a metal core covered with a sheath. The device allows welding with all types of electrodes, e.g. alkaline, cellulose, rutile or acidic.

ARC FORCE

Increasing or decreasing the length of the welding arc depending on the distance of the electrode from the material being welded. Allows you to adjust the dynamics of the welding arc. Shortening the arc length is accompanied by an increase in welding current, which results in stabilisation of the arc.

VRD

The VRD function reduces the voltage in the unloaded state. The correct voltage value is restored only just before the arc is ignited. This minimizes the risk of electric shock, but in some cases it can make it difficult to light the arc.

HOT START

The function is designed to prevent sticking the electrode to the material and is a great convenience when arcing. It works at the moment of arcing, causing a temporary increase in the welding current above the value set by the welder.

SYNERGY

MIG/MAG welding using synergistic settings. The device selects welding parameters depending on the selected type and thickness of the material. These parameters can be changed by the user to adjust the settings to suit their needs. Many programs have been prepared for synergistic welding, including the lutowelding program.

2 ROLLER WIRE FEEDER

Professional feeder made of die-cast aluminum, has a strong motor, which allows for stable wire feeding without jamming. It is equipped with 2 drive rollers.

SMOOTH ADJUSTMENT OF WIRE FEED

Smooth feed speed adjustment of the wire is supported by an additional potentiometer allowing you to set the speed for different wire diameters.

EURO CONNECTOR

Standard welding torch connection that allows you to connect various types of torches (e.g. prepared for welding Aluminum by replacing the Teflon cartridge and current tip).

REGULATION OF INDUCTANCE

It allows you to optimize arch characteristics depending on the thickness of the welded element and the welding method and conditions. The function is useful during MIG/MAG welding of thin elements, preventing them from burning out and soldering galvanized elements.

2T/4T

2T - Pressing the welding torch button will cause the gas to pre-flow, then ignite the arc and start welding. When the button is released, the arc will be extinguished and the gas will flow out.

4T - Pressing and releasing the welding torch button will cause the gas to pre-flow, then ignite the arc and start welding. After pressing and releasing the button again, the arc will be extinguished and the gas will flow out.

POLARITY CHANGE - WELDING WITHOUT GAS

Thanks to the variable polarity, it is possible to weld using the FLUX method with powder wire without shielding gas. The wire is filled with flux producing protective gases during welding.

WELDING OF ALUMINIUM ALLOYS

Aluminum welding is not a simple activity, it requires the welder to have experience, knowledge and preservation of certain practices that will facilitate the performance of welds on aluminum elements.

Depending on the needs, appropriate corrections should be made to voltage and inductance to achieve the desired effect.

EURO CONNECTOR

Standard welding torch connection that allows you to connect various types of torches (e.g. prepared for welding Aluminum or Soldering by replacing the Teflon cartridge and current tip).

TIG DC LIFT

Tungsten electrode welding in an inert gas shield using a handle with a gas valve in the handle. Arching is done by rubbing, just like it is done when it comes to arcing in the MMA method.

The use of this method allows welding of all types of steel, i.e. carbon, alloy, stainless, acid-resistant, as well as copper alloys, e.g. bronze or brass.

ATTENTION! The TIG grip is not standard equipment.

SPOOL-GUN

The device allows you to connect a Spool Gun (SG) type handle with a mini wire feeder mounted in it and a D100 spool of steel or colored wire.

ATTENTION! The SPOOL-GUN holder is not standard equipment.

• Welding machine Sherman DIGIMIG 200 SYNERGIC
• Welding torch MB-15 / 3m
• MMA Electrode Holder
• Bulk cable
• User manual

+ MAG WELDING KIT WITH CYLINDER AR/CO2

• factory new Ar/CO2 cylinder with a capacity of 8l - certified, has all the approvals required by gas sales points,
• Ar/CO2 cylinder reducer with two clocks,
• gas line,
• Steel welding wire SG2 0,8mm x 5kg
• set of spare parts for mig burner

Specifications