Suvirinimo aparatas SHERMAN DIGIMIG 205L SYNERGIC LCD, MIG/TIG/MMA, 200A

Trumpai apie prekę

Prekė: Suvirinimo aparatas SHERMAN DIGIMIG 205L SYNERGIC LCD, MIG/TIG/MMA, 200A. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: SET1-7812697

• full free post-purchase support
• You can call us at any time and we will help you set the parameters and operate the device

✅ WELDING CURRENT: MIG: 200A, MMA: 180A, TIG DC: 200A,

✅Readable and easy to use control panel

✅Synergic programmes

✅ EURO handle socket,

✅Manual settings

✅2T/4T

✅Microcontroller (MCU)

✅Fan Stop

✅Regulation of inductance

✅Arc Force

✅Hot Start

✅Recent settings

The DIGIMIG 205 LCD SYNERGIC synergistic welding machine is used for manual welding of steel and non-ferrous metals. It can also be used for soldering thin (up to 3 mm) galvanized sheets. It enables welding using MMA (wrapped electrode), TIG Lift (with arc ignition by rubbing), and MIG methods. The MIG method can be used in manual and synergistic mode, simplifying its operation.

By changing the polarity, the device allows MIG welding using both standard wires in the protective gas shield and self-shielding powder wires.

Digital control allows full adjustment of parameters, arc dynamics and characteristics. The use of synergistic settings for carbon steel and aluminum in the welding machine significantly simplifies its operation and allows for use by people with less experience and hobbyists.

CHANGE OF WELDING POLARITY ON THE MIG HANDLE

Fast and safe change of welding polarity possible from the position of the front panel of the device. Weld with reverse polarity with self-shielding welding wires that do not require shielding gas. A great option when you need to take the machine to work in the field, and you do not necessarily want to take a cylinder with you with accessories.

POSSIBILITY OF CONNECTING THE SPOOL GUN HOLDER

The device allows you to connect a Spool Gun holder with a mini wire feeder mounted in it and a D100 spool of steel or colored wire. The MIG/MAG method can be used in manual and synergistic mode. Synergistic programs are available for steel, Al. alloys and for self-shielding wire welding.

REGULATION OF MIG/MAG WELDING INDUCTANCE

Full control over arc characteristics thanks to MIG/MAG welding inductance adjustment. Control the amount of chipping and the width of the weld face and the depth of melting.

Professional Wire Feeder

Professional 2R feeder - reliable and precise wire feeding, thanks to the use of a professional feeder - ensures smooth wire feeding to the handle and stable welding parameters.

POWER SUPPLY PARAMETERS

• Power Supply: 230V
• Welding methods: MIG, MAG, FCAW, MMA, TIG DC
• Maximum welding current: 200A
• Working cycle: MIG 30% 200A, MMA 30% 180A, TIG 30% 200A.
• Network security: 25 A
• Maximum power consumption: 8,5kVA
• Net weight: 12kg
• Dimensions: 495x210x330mm
• Degree of protection: IP21S

MIG/MAG welding parameters:

• Welding current: 50-200A
• Welding voltage (current): MIG: 16,5 - 24V
• Wire spool weight: 1kg, 5kg
• Wire spool diameter: D100/D200 (100mm/200mm)
• Welding polarity change: YES
• Wire feed speed: 2 – 12,8 m/min
• Access speed of the feeder (Slow start) 3 – 6 m/min
• Inductance: (-10) – (+10)
• Max MIG current consumption: 40A
• Inductance: -10 – +10
• Gas flow: 0,1 – 2.0

TIG welding parameters:

• Welding current: 10-200 A

MMA welding parameters:

• Smooth regulation of welding current: 10-200A
• Voltage without load: 54V
• ARC FORCE (MMA): 0 – 10
• HOT START (MMA): 0 - 10
• VRD (MMA): On. Off.

• MIG/MAG is a popular process both in hobby applications and in industry. It consists in welding with a hot melt electrode (in the form of wire wound on a spool) in a gas shield. The advantages of semi-automatic MIG/MAG welding include: ease of mastering the method at the basic level, high welding efficiency, high quality of the resulting weld.

• FCAW (FLUX) - a popular variant of the MAG method - semi-automatic welding with a hot melt electrode (welding wire on a spool). The main difference is that it is welded with a special self-shielding wire, which does not require the use of shielding gas. Simplifying, we can say that this method combines two processes: MAG welding and MMA electrode welding.

• MMA - this is probably the best known and widespread welding method. The type and diameter of the wrapped electrode is selected depending on the type of material being welded. The MMA method does not require shielding gases. Welding is carried out using an electrode in a special sheath, which under the influence of the heat of the welding arc melts to form a weld. Melting sheath provides protection for the welding lake.

• VRD function - reduces voltage in the unloaded state. The correct voltage value is restored only just before the arc is ignited. This minimizes the risk of electric shock, but in some cases it can make it difficult to light the arc.

• ARC FORCE function - allows you to adjust the dynamics of the welding arc. Shortening the arc length is accompanied by an increase in welding current, which stabilizes the arc. Reducing the value gives a soft arc and a smaller depth of melting, while increasing the value causes deeper melting and the possibility of welding with a short arc. With the high value of ARC FORCE set, you can weld keeping the arc of minimum length and high melting speed of the electrode

• HOT START function - is popularly called hot start. It works at the moment of arcing, causing a temporary increase in the welding current above the value set by the welder. HOT START is designed to prevent the electrode from sticking to the material and is a great convenience when arcing. In the case of welding small elements, it is recommended to disable this function, as it may cause burning of the welded material.

• TIG DC - welding with a non-melting electrode in an inert gas shield, e.g. alloy and non-alloy steels.

• SYNERGY - By setting the appropriate program or entering parameters, the device will independently select most welding settings, such as wire feed speed or appropriate voltage, according to the programmed data.

• IGBT - welding machine is made in modern inverter technology using IGBT transistors. Thanks to this, it has stable welding parameters, enjoys high efficiency and, above all, ensures good welding quality.

• Working with SPOOL GUN handles - is adapted to work with SPOOL GUN handles. You can arm the device simultaneously for welding two different materials, e.g. The device is armed with steel wire, and the SPOOL GUN handle for welding aluminum.

• 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow,

• 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

• LUTOSPELING - is a method that resembles MIG/MAG welding to a fairly large extent, but the energy supplied in this case is much less. This means that soldering is used to join thin sheets covered with a layer of zinc. The described method is a bonding process during which solder melts, not the material we work with.

Solid workmanship

The power source is based on IGBT transistors that provide a minimum of electromagnetic interference, allowing you to increase the efficiency and reliability of the device.

The transport handle makes it easy to carry the device.

• Sherman MIG 205 LCD SYNERGIC welder
• Welding torch MB-15 / 3m
• MMA Electrode Holder
• Bulk cable
• User manual

Specifications