Suvirinimo aparatas MAGNUM 200A KN TIG MIG/MAG

Trumpai apie prekę

Prekė: Suvirinimo aparatas MAGNUM 200A KN TIG MIG/MAG. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: MIG 200 MMA IGBT
• Ilgis: 656 mm
• Plotis: 231 mm
• Aukštis: 401 mm

+ MIG/MAG, MMA, TIG WELDING SET, INCLUDING:

✅ WELDING ACCESSORIES

The Magnum Mig 200 KN device is a mobile semi-automatic welding machine designed for welding using the following method:

➡ MIG MAG

• MIG MAN - MIG-MAG welding with manual settings,
• FLUX / FCAW - Welding with self-shielding wire.

➡ TIG

• TIG LIFT - welding with a special handle with a valve, the arc is then ignited by lightly rubbing the non-melting electrode on the welded material,

➡ MMA

• MMA - welding with coated electrodes (rutile, basic, acidic).

MAGNUM MIG 200 MMA KN IGBT is used for welding:

✔ low carbon steels

✔ low alloy steels

✔ alloy steels

✔ aluminum and its alloys

ADVANTAGES AND FUNCTIONS OF THE WELDING MACHINE:

⭐IGBT INVERTER TECHNOLOGY Insulated Gate Bipolar Transistor - is a modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with the high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment .

⭐ EASE OF USE - the welder is equipped with an easy-to-use control panel and display, so it can be used even by amateurs.

⭐ MOBILITY OF THE DEVICE - The welder is equipped with a strong shelf for the cylinder , in addition, the chain holder ensures solid keeping of the cylinder in one place when moving the welder. The welder also has a chassis with 4 wheels , 2 front wheels are torsion, making the welder very mobile.

⭐ WORK IN THE INDUSTRY - thanks to the high quality of workmanship and multifunctionality, the device can be used in professional and industrial works.

ADDITIONAL ADVANTAGES AND FUNCTIONS OF THE WELDING MACHINE:

⭐ BRAZING - it's a method that is quite similar to MIG / MAG welding, but the energy supplied in this case is much lower. This causes that brazing is used to connect thin sheets covered with a layer of zinc . The described method is a bonding process during which the solder is melted, not the material we are working with .

⭐ EURO CONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

⭐ FAN COOLING SYSTEM, which definitely increases its efficiency.

⭐ OVERLOAD PROTECTION, ensures the reliability of the device.

✅ ANTI STICK - short-circuit function - reduces the welding current to the minimum value when the welder makes a mistake and the electrode sticks to the welded material. This makes it easier to detach the electrode from the welded material and protects the electrode holder from damage.

✅ HOT START : makes it easier to ignite the electrode by providing more welding current with each arc ignition.

➡ The device is equipped with overload protection , which increases its reliability.

❄ The device has a fan cooling system , which significantly increases its efficiency.

Inductance adjustment allows you to optimize the arc characteristics depending on the thickness of the welded element and the welding method and conditions.

The function is useful during MIG/MAG welding of thin elements, preventing their burn-through and braze welding of galvanized elements.

The thinner the MIG/MAG welded element, the higher the inductance should be (soft arc - less penetration), for thick elements the opposite (hard arc - greater penetration).

The standard neutral inductance setting is in the middle of the scale.

Changing the inductance value also reduces the amount of welding spatter during welding in the CO2 shield.

The optimal setting of the inductance value depends on several factors and may differ from the standard recommendations, it should be selected during welding tests by manipulating the potentiometer knob.

THANKS TO THE ADJUSTMENT OF INDUCTION, THE WELDING MACHINE IS SUITABLE FOR BRAZING!

✔ REPAIR WORKSHOPS

✔ LOCKWORKS

✔ ANY BODYWORK REPAIRS

✔ FITTER SERVICES

✔ FARMS

✔ HOMEWORK

AND WHEREVER RELIABILITY COUNTS!

EFFICIENT WORK WITH A PROFESSIONAL WIRE FEEDER

The welder has been equipped with a professional wire feeder, which guarantees the stability and continuity of operation of the device.

The 2-roll feeder enables precise advancement of the welding wire , excluding its slippage.

The device has a roll for steel in sizes 0.8 - 1.0.

HANDLE WITH EURO CONNECTOR

The welder has a EURO socket for the MIG welding cable. The socket allows you to quickly change the handle in the same standard and, most importantly, it allows you to change the polarity for welding with FLUX self-shielding wire.

• Professional welding gloves - 1 pair
• Welding wire for steel 5 kg 0.8 mm - 1 pc.
• Anti-spatter spray - 1 pc.
• Magnetic square - 11 kg - 1 pc.
• Current tip - 5 pcs.
• Gas nozzle for the handle - 2 pcs.
• Power socket - 2 pcs.
• Insulator - 2 pcs.
• Pack of electrodes - 1kg (2.5 or 3.2mm to choose from)

MAGNUM Migomat is a device with a wide range of applications, designed as an inverter power source enabling welding with MIG / MAG or FCAW gas-shielded fusible wire, self-shielding wire (after changing the polarity), welding with the MMA lagging electrode, as well as the TIG Lift method.

✔ MIG/MAG welding

Gas-shielded arc welding is one of the most widely used processes for the production of welded structures. The semi-automatic welding process consists in fusing the edges of the welded object and the material of the consumable electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire and the welded detail, in an inert or active gas shield.

✔ MMA welding

in the MMA method, a coated electrode is used, consisting of a metal core covered with a coating. An electric arc is generated between the end of the electrode and the material to be welded. The arc is ignited by touching the tip of the electrode to the workpiece.

✔ TIG LIFT welding

In the TIG (Tungsten Inert Gas) method, the electric arc is ignited in a shield of inert gas (argon), between the welded element and a non-consumable electrode made of pure tungsten or tungsten with additives. In the TIG DC Lif t mode, the arc is ignited when the electrode comes into contact with the workpiece. In TIG DC mode, the current is constant. Allows welding of steel and its alloys.

❗❗ You can weld with the TIG method after connecting an additional handle, available at our auctions ❗❗

✔ Welding with FCAW self-shielding wire

Thanks to the polarity reversal function, it is possible to weld without shielding gas with FCAW self-shielding wire. The wire is intended for general production works, also in field conditions, and for welding structures that are not subject to impact resistance requirements. DC(-) welding current.

Self-shielding cored wire fi 0.8mm / 1kg E71T-GS is intended for welding ordinary and high-strength carbon steels not exceeding 510 MPa .

It is used in prefabrication, construction, production of tanks, agricultural equipment , etc. Used both in the production and repair of devices.

➖➖➖➖➖➖➖➖➖➖➖➖

MIG/MAG WELDING PARAMETERS:

• MIG/MAG welding current: 30 - 200 [A]
• MIG/MAG welding voltage: 16.5 - 23 [V]

MMA WELDING PARAMETERS:

• max. MMA welding current: 30 - 180 [A]
• Idle voltage: 57 [V]

TECHNICAL DATA :

• Power supply: AC 230 [V], 50/60 [Hz],
• Max. power consumption: 6.2 [kW]
• Required protection: 20 [A]
• Efficiency: 60 [%]
• Welding without gas: Yes
• Wire spool weight: max: 5 [kg]
• Wire diameter: 0.6/0.9/0.8/1.0 [mm]
• Housing protection class: IP21S
• Weight: 14 [kg]

• MAGNUM MIG 200 KN welding machine - 1 pc.
• Welding torch MB 15/3 m - 1 pc.
• Electrode holder - 2 m - 1 pc.
• Mass cable - 2 m - 1 pc.
• User manual in Polish.
• Warranty Card.

• Professional welding gloves - 1 pair
• Welding wire for steel 5 kg 0.8 mm - 1 pc.
• Anti-spatter spray - 1 pc.
• Magnetic square - 11 kg - 1 pc.
• Current tip - 5 pcs.
• Gas nozzle for the handle - 2 pcs.
• Power socket - 2 pcs.
• Insulator - 2 pcs.
• Pack of electrodes - 1kg (2.5 or 3.2mm to choose from)

SET 2

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Magnum
Parametry	Power consumption	6.2 kVA
Parametry	Supply voltage (V)	230
Parametry	Duty cycle time	60%
Parametry	Wire diameter (mm)	0,6-1,0
Parametry	Device weight	15 kg
Parametry	Welding range	30–200 A
Parametry	Height	401 mm
Parametry	Length	656 mm
Parametry	Width	231 mm
Parametry	Length of ground cable	200 cm
Parametry	Welding cable length	300 cm
Parametry	Manufacturer code	U MI 200MMAKN MAPL
Parametry	EAN (GTIN)	5907195563653
Parametry	Model	MIG 200 MMA IGBT
Parametry	Welding methods	MIG/MAG,MMA
Parametry	Additional features	transport wheels,infinitely adjustable welding current,EURO handle