Suvirinimo aparatas IDEAL EXPERT MIG 250 MMA TIG Lift, 230V, 250A, sinerginis

Trumpai apie prekę

Prekė: Suvirinimo aparatas IDEAL EXPERT MIG 250 MMA TIG Lift, 230V, 250A, sinerginis. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: EXPERT MIG 250 4X4 PFC
• Ilgis: 762 mm
• Plotis: 322 mm
• Aukštis: 581 mm

• Welding methods: MIG/MAG, MMA, TIG LIFT, SYNERGY, SOLDERING
• Power supply: 230V
• Operating cycle 60% at maximum welding current 250A
• For welding: black steel, stainless steel, acid-resistant and aluminium
• SYNERGY - automatic selection of parameters
• Welding of materials up to 14mm thickness (7mm melt)
• Smooth regulation of welding current, inductance
• Professional, metal, 4-roll wire feeder
• Possibility to connect the SPOOL GUN holder
• 2T/4T mode
• Settings memory
• Euro connector
• Clean, aesthetic welds
• Made in IGBT technology, PFC chip

✔ FEATURES AND ADVANTAGES:

• INDUCTION ADJUSTMENT - the introduction of less heat prevents sheet deformation and damage to the zinc layer,

• LUTOSPELING - a method that uses less energy; for joining thin galvanized sheets, stainless steels, and various types of joints,

• 2 TAKT - welding begins after pressing and ends after releasing the button,

• 4 TAKT - welding begins after the first press and release of the button, and ends after pressing again; more convenient with longer welds,

• TIG LIFT - arc glow by rubbing the electrode against the material; used in places where there is a risk of interference of electronics by high frequency current; welds are of high quality,

• SPOOL GUN - welding torch with built-in wire feeder, ideal for welding thin sheets; wire spool is in the handle,

• EUROCONNECTOR - allows the interchangeable use of various types of handles,

• PFC - provides resistance to large voltage drops,

• IGBT- bipolar transistors increase the efficiency and reliability of the device, ensure lower power consumption.

⚙ TECHNICAL SPECIFICATION:

• Power supply: 230V 50/60Hz (1ph)
• Network security: 25A "C"
• Power: 7.8kW
• Power consumption in idle state: 31W
• Welding current: MIG/MAG: 40 - 250A | MMA, TIG: 10 - 250A
• Rated input current: MIG: 37A | TIG: 29A | MMA: 41A
• Rated input power: MIG: 8.3kW | TIG: 6.4kW | MMA: 9.2kW
• Idle voltage: 68V
• Diameter of steel/stainless steel wire: 0.6 - 1.2 mm
• Aluminum wire diameter: 1.0 - 1.2 mm
• Diameter of self-shielding wire: 0.8 - 1.2 mm
• Diameter of soldering wire: 0.8 mm
• Diameter of electrode: 1.6 - 6.0 mm
• Spool with wire: 200mm, 300mm; 5kg, 15kg
• Protection rating: IP23 "H"
• Dimensions: 76 x 32 x 58 cm
• Weight: 27kg

INCLUDED IN THE SET:

• Self-tinting visor MAGNUM NOVA - safe mask with 96 x 39mm field of view, 2 sensors, reaction time 1/30000 s,
• Factory new reusable cylinder with a mixture of Ar (82%) / CO2 (18%) with a capacity of 8l; 10-year legalization, the possibility of filling at any point with technical gases,
• Gas hose with clamps - for connecting the reducer - 1pcs. ,
• Reducer with two pressure gauges - precise reducer with adjustment; for controlling the pressure in the cylinder and the amount of gas flowing out,
• Anti-chipping preparation - protects the nozzle and metal against welding chipping,
• Welding wire SG2 5kg - 1pcs ,
• Gloves welding - 1 pair,
• Scraper for gas nozzles,
• Welding hammer for cleaning welds,
• Exploitation parts of MIG/MAG handle (nozzles, connectors, tips, insulators),
• Angles magnetic 11kg - 2 pcs. ,
• Electrodes SkandiKraft 1kg - 1pack.

THE SET INCLUDES:

• IDEAL EXPERT MIG 250 PFC welding machine,
• Welding torch MIG/MAG type MB 24 - 3m,
• mass handle - 3m,
• User manual and warranty card.

ADDITIONAL ACCESSORIES:

• Self-tinting visor Magnum NOVA,
• Botla with Argon/CO2 gas mixture,
• Reducer cylinder Ar/CO2 MINI with two pressure gauges,
• Welding wire SG2 0,8mm - 5kg,
• Preparation anti-chipping ALLWELD,
• Angle magnetic 11kg - 2 pcs.,
• Electrodes SkandiKraft - 1kg,
• Flame-retardant gloves for welding,
• Hose for connecting gas with clamps - 2m,
• Scraper for gas nozzles,
• Hammer welding spring.

+ HANDLE CONSUMABLE PARTS:

• Gas nozzle - 2 pcs.
• Current connector - 2 pcs.
• End current - 10 pcs.
• Gas distributor - 2 pcs.

Specifications