Suvirinimo aparatas aliuminiui: plazminis pjoviklis, pulsinis MIG, HF TIG, šaltas, švarus, MMA

Trumpai apie prekę

Prekė: Suvirinimo aparatas aliuminiui: plazminis pjoviklis, pulsinis MIG, HF TIG, šaltas, švarus, MMA. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Andeli
• Modelis: MIG-205DP
• Ilgis: 490 mm
• Plotis: 225 mm
• Aukštis: 340 mm

【8 in 1 Multi-Functional Welder】Combines Pulsed MIG/Gas MIG/SYN/MAN MIG/HF TIG/CUT/Clean/Cold/Spot Welding/MMA Aluminum Welding . With 205A max welding current, 50A max cutting current, and 2T/4T modes, it adapts efficiently from thin‑sheet work to heavy‑duty repairs.

Parameter：

Power Supply Voltage(V)：230V

Rated Input Capacity(KVA):

MIG:8.1KVA;TIG:6.4KVA;MMA:7.9KVA;CUT:7.6KVA

Output CurrentRange(A):

MIG:50-205A

TIG:10-205A

MMA:10-205A

CUT:20-50A

Duty Cycle:60%

No Load Voltage(V):

MIG/TIG/MMA:57V;CUT:350V

IP:21S

Insulation Class:H

Dimension(L*W*H)(mm):495*220*340

Net Weight(Kg):12.8

The Weld Cleaning Mode is designed to clean and restore weld beads after welding, especially for stainless steel applications.

By using a dedicated cleaning torch and conductive cleaning solution, this mode effectively removes surface oxides,discoloration, and heat marks from the weld area without grinding or damaging the base material.

This process improves the appearance of the weld bead, enhances corrosion resistance, and helps achieve a clean and professional finish.

Weld Cleaning Mode is suitable for post-weld cleaning operations in fabrication, maintenance, and finishing work.

DC HF TIG/CUT​

Featuring a built-in HF arc start for TIG (non-contact) and an HF pilot arc for plasma cutting (handles painted, rusty, uneven surfaces). The exclusive COLD welding mode (TIG mode)​ provides a distinct low-heat advantage, minimizing distortion on thin stainless/carbon steel. The dedicated cleaning function removes oxidation/discoloration from stainless welds, improving appearance and quality.Cutting thickness: Clean Cut 10mm (3/8"), Maximum Cut 18mm (2/3").

Pulsed SYN/MAN MIG

Combines Pulsed MIG, Gas /Gasless MIG with Synergy, plus Inductance, Pre-flow, Wire Feed, Burnback, Post gas, and 2T/4T/SPOT Mode for seamless welding of aluminum, steel, and stainless steel.minum, thin steel, and stainless steel. SYN/MAN MIG: Automatically adjusts parameters based on your current settings,also you can adjust the welding current according to your welding habit.

Robust Protection and High Reliability​

Streamlined high-strength engineering plastic panels offer excellent insulation, static resistance, and corrosion resistance. Advanced auto-protection shuts down the unit in case of voltage fluctuation, overheating, or other abnormalities, displaying fault info; automatically restarts when voltage stabilizes. Multi-protection design extends machine life.

Automatically Memorized Function

Our multiprocess welding machine can auto save and recover welding parameters,reducing downtime between jobs and ensuring repeatable precision and uniformity in every weld.

Wire feeder:

· Open the welder door and remove the Spool Retaining Knob from the wire spool spindle.

·  Slide the wire spool onto the center of the spindle. When doing so, make sure the drive pin of the spindle is engaged with a spoke of the wire spool.

· Reinstall the Spool Retaining Knob.

· To set the spool tension, gradually tighten the Spool Retaining Knob until there is slight resistance when spinning the wire spool on the spindle.

· If the tension is set too loose, the wire spool may spin freely on the spindle and cause the wire to unspool.

· If the tension is too tight, the drive roller may have difficulty pulling the wire from the spool, and slipping may occur.

Air System Configuration:

·  Install the air filter regulator between the air compressor and the machine’s air inlet.

· Adjust the regulator to 60–90 PSI (4.0–6.2 bar) (do not exceed the rated pressure).

Package Includes:

The standard set comprises the MIG-205DP welder unit, air filter regulator, ground clamp, electrode holder, welding torch accessories, U-grooved drive rolls (0.035"/0.045" wire), PU gas hose, TIG welding torch, plasma cutting torch, MIG welding torch,and cleaning torch.All supplied to support multi-process operation.

Specifications