Pusiau automatinis suvirinimo aparatas IDEAL PRAKTIK MIG 201, su LED, MMA, TIG, 230V, 200A

Trumpai apie prekę

Prekė: Pusiau automatinis suvirinimo aparatas IDEAL PRAKTIK MIG 201, su LED, MMA, TIG, 230V, 200A. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: IDEAL
• Modelis: PRAKTIK MIG 201 SYNERGIC LED
• Ilgis: 800 mm
• Plotis: 280 mm
• Aukštis: 540 mm

Manufacturer: IDEAL ║ Welding methods: MIG/MAG, MMA, TIG LIFT, FLUX, Soldering ║ Power supply: 230 V ║ Welding current: 200 A ║ Efficiency: 60 %

─ ...

By buying from us, you gain ⭐ ENGINEER SUPPORT ⭐, which can be envied by the competition!

In our store, buying a welding machine is just the beginning! Because we know that a wise choice is not only a matter of the lowest price, but also of certainty and support after the transaction. It is a comprehensive solution with invaluable after-sales support, which is in vain to look elsewhere.

🧠CHOOSE WISELY 🧠

⏬ See details below ⏬

────────────────────────────────────────────────────────────────────

• Designed for welding of low-carbon, low-alloy, high-alloy stainless and acid-resistant steels, aluminium alloys
• Synergy - automatic selection of parameters for carbon steels (CO2, MIX, FLUX)
• Manual mode for experienced welders who prefer full control over the welding process. Allows independent selection of all parameters
• Lutowelding is particularly useful when combining galvanized sheets and thin materials (repair of car bodies). Most importantly, the lower operating temperature ensures that the galvanized layer remains intact. This means that the plate retains its anti-corrosion properties.
• FLUX - arc welding with powder wire, not requiring the use of gas cylinders. The wire itself is filled with flux or a chemical that produces protective gases during welding.
• Inductance adjustment allows you to set the “hardness” of the arc and the heat associated with it. The smaller the value, the more stable the arc, more heat, but also more chipping. At a higher value, the arc is less stable, the heat is less, and the amount of chipping decreases. Prevents is also deformation of thin welded materials.

• Advanced IGBT technology, based on modern transistors, guarantees not only less power consumption, but also stable operation even under heavy loads
• 2T/4T increases comfort and flexibility. In two bars, welding is carried out as long as you hold the button in the handle. At four bars, pressing and releasing the button starts welding and ends the process the same way the next time you press and release the button.
• Hot Start increases the welding current for a fraction of a second at the moment of arcing.
• Arc Force automatically regulates welding current depending on arc length.
• VRD reduces the idle voltage on the electrode to a safe value.
• Solid metal 2-roll wire feeder
• Simple and clear control panel

🔸 LED control panel

The intuitive control panel is equipped with an LED display and one multifunctional knob, which simplifies operation:

• Display: Shows current parameters (voltage, current, inductance).
• Knob: Used to adjust all parameters. Pressing changes function (e.g. from voltage correction to inductance), and rotation changes the value.

Selection buttons:

• Method: Choice between MIG SYN, MIG MANU, TIG LIFT, MMA.
• Gas/Material: Choice of CO2, MIX or FLUX (for synergy).
• Working mode: 2T (standard) or 4T (for long welds).
• Wire diameter: Choosing wire diameter for synergistic program.
• Test buttons: Quick wire extension and gas test.

Ideal PRAKTIK MIG 201 SYNERGIC LED is a light i modern semi-automatic welding machine, designed mainly for hobby, workshop and light assembly users. Thanks to synergy, welding becomes easier, and the possibility of MIG/MAG, TIG LIFT, MMA and FLUX welding (without gas) makes it an extremely universal tool.

PRAKTIK MIG 201 SYNERGIC LED is an excellent choice for:

• Home workshop and garage (repair, DIY).
• Light flashing work (thanks to the regulation of inductance and soldering function).
• Field assembly work (light weight and FLUX option).

It is a device that combines simplicity of operation (thanks to synergy) with the possibilities of advanced configuration (manual mode, inductance), constituting a solid compromise between price and functionality.

────────────────────────────────────────────────────────────────────

Matthew J. ⭐⭐⭐⭐⭐

"Welding beautifully! For the amateur - mega recommend! Easy operation and solid workmanship. "

Victor T. ⭐⭐⭐⭐⭐

"The eye works flawlessly."

Paweł P. ⭐⭐⭐⭐⭐

"I am a welder and this welder wins price and quality! 🏆 In the home workshop it is doing great. I recommend 100%! ✅"

────────────────────────────────────────────────────────────────────

In our store, buying a welding machine is just the beginning! We want you to fully use its potential, which is why each customer after purchase, giving the number of their order, receives access to an individual consultation with our experienced welding engineer!

How to use the dedicated support of the Engineer?

1. 📞 Contact us!
2. # Enter your order number: This is the key that will open the door for you to talk to our expert.
3. 🧯 Prepare questions: Think about what you need help with – whether it is the first start-up, selection of parameters for a specific project or advanced welding techniques.
4. 💬 Talk directly to the Engineer: Our specialist will take the time to answer your questions, help you set up your welding machine and share practical tips.

Why is our Engineer Support MORE than just a phone call to the store?

• ✅ Expert on the other side: After verifying your order number, you can be sure that you are talking to an experienced welding engineer and not just general customer service. This is a practitioner with in-depth technical knowledge.
• ⌚ Focused attention on your needs: This is not a rushed answer. Our engineer will take the necessary time to understand your problem or question and provide comprehensive assistance.
• 🔍 Tailor-made consulting: The assistance is tailored to your level of advancement and specific applications of the welding machine in your projects – from minor repairs to more complex structures.
• 🚀 Faster results, fewer errors: Instead of long searches and trial and error methods, you get professional tips that will allow you to achieve the intended results faster and avoid costly mistakes.
• 💡 Solutions for unusual challenges: The general hotline may not be enough for more complex issues. Our engineer will help you with unusual problems or advise you on advanced welding techniques.

With us you can be sure that your investment in a welding machine will bring the best results, and you will gain a partner ready to support you at every stage of work! 🏅😎

POWER SUPPLY PARAMETERS

• Power supply: 230 V
• Number of phases: 1 ph
• Frequency: 50 / 60 Hz
• Power protection: 16 A type C

TECHNICAL PARAMETERS

• MIG/MAG welding current: 50 ÷ 200 A
• MMA welding current: 10 ÷ 160 A
• TIG welding current: 10 ÷ 200 A
• Diameter of self-shielding wire: 0,8 - 1,0 mm
• Steel wire diameter: 0,6 - 1,0 mm
• Diameter of welding electrode: 1,6 - 4,0 mm
• Idle voltage: 50 V
• Efficiency: 60%
• Feeder: 2R
• Wire spool size: D200
• Max. Spool size: 5 kg
• Wire diameter: 0.6 / 0.8 / 0.9 / 1.0 mm

PHYSICAL PARAMETERS

• Housing protection: IP21S
• Cooling: Fan
• Weight: 10 kg
• Dimensions: 420 x 155 x 270 mm

• Ideal PRAKTIK MIG 201 SYNERGIC LED
• Welding torch MIG/MAG type MB 15 - 3 m
• Electrode holder - 2 m
• Bulk holder - 2 m
• Steel wire roller 0,8/1,0 - 1 pcs
• User manual in Polish

ADDITIONAL ACCESSORIES:

• Factory new reusable cylinder with a mixture of Ar(82%)/CO2(18%) with a capacity of 8 l. Cylinders have 10-year legalization and can be filled at any point with technical gases.
• Factory new reusable cylinder with argon with a capacity of 8 l. Cylinders have 10-year legalization and can be filled at any point with technical gases.
• Self-tinting visor MAGNUM TURBO TRUE COLOR - a safe mask with an enlarged field of view of 100x60mm, 4 sensors and a reaction time of 1/30 000s, for full eye protection.
• Gas hose - for connecting the reducer to the welding machine - 2x2m
• Reducer with two pressure gauges - precise reducer with adjustment. Our model has a pressure gauge to control the pressure in the cylinder and a second to the amount of gas flowing out.
• Reducer with Rotameter
• ALLWELD anti-chipping preparation - protects the nozzle and metal against welding chipping.
• Welding wire SG2 0,8 mm 5 kg - precision winding
• Welding wire for aluminium ALMG 2kg 1,0 mm
• Clamp ties - 4 pcs
• Gloves for welding MIG/MAG - 1 pair
• Gloves for welding TIG short - 1 pair
• Scraper (cleaner) for gas nozzles
• Set of MB15 handle consumable parts (gas nozzles - 2 pcs., current connectors - 2 pcs., current tips - 10 pcs., gas distributor - 2 pcs. )
• Angles magnetic 11 kg - 2pcs
• Electrodes SkandiKraft 3,2 mm 1 kg - 1 pack

+ TIG ACCESSORIES (ZS 0 DC)

• Handle TIG 17V/4
• Box for el. operational
• Wire TIG HORDA 4Si 1.6 mm for black steel 1 kg
• Reducer with Rotameter
• Gas hose - 2 m
• Nozzle Ceramic 5/7/10/ + 6
• Telephone TIG terminal block 1,6/2,0/2,4
• Coupler TIG 1,6/2,0/2,4
• Korek TIG medium SR T17/18/26
• Gloves TIG short
• Electrode TIG red 1,6/2,0/2,4

Specifications