PoE komutatorius ATTE xPoE-4-11A-HS, 100 Mb/s, 4 jungtys, 2 vnt.

Trumpai apie prekę

Prekė: PoE komutatorius ATTE xPoE-4-11A-HS, 100 Mb/s, 4 jungtys, 2 vnt.. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: Atte
• Modelis: xPoE-4-11A-HS

2x PoE Switch ATTE xPoE-4-11A-HS 100Mbps 4 Ports for Office Monitoring

Key features:

• 4 RJ45 10/100Mbps ports for three PoE receivers
• The ability to distribute power and network to several devices by one UTP line
• Strengthening LAN and PoE signals as repeater/extender
• Sequential start of PoE outputs for increased installation security
• Easy and quick installation with no setup required
• Very low power consumption below 0,5W
• Small size and heat shrinkable housing for easy installation in small spaces
• Clear optical signaling of power and transmission status
• Contents of the set: 2x (switch ATTE xPoE-4-11A-HS, manual)

ATTE xPoE-4-11A-HS is a 4-port PoE switch with the function of extending and separating LAN signal and PoE power supply. The device has 1 PoE IN port (power from a 802.3at, 802.3af or Passive PoE switch) and 3 PoE OUT ports to power receivers such as IP cameras. Strengthens and extends the network signal and PoE on longer sections of wires, allowing you to connect several PoE devices on one line. Supports up to 40W of total output power. Sequential start of PoE OUT increases start-up safety and short-circuit resistance. Shrink housing and small size allow for installation in limited spaces. No configuration required – works automatically when connected to a power PoE or PoE Passive switch. The device does not include its own power supply, requires a compatible PoE switch or PoE Passive power supply.

FAQ - Frequently Asked Questions

• How to connect the ATTE xPoE-4-11A-HS switch? Connect the PoE IN cable from the PoE switch or PoE Passive power supply and the network wires to the PoE OUT outputs.
• What devices does the switch support? Supports IP cameras and other network devices powered by PoE 802.3af, 802.3at or PoE Passive.
• Does it require configuration? No, the device works automatically when connected to a PoE power source.
• How many devices can I connect? You can connect up to 3 PoE receivers at the same time.
• What power can be obtained at the outputs? The total PoE output power is up to 40W, depending on the power source and cable parameters.
• How does sequential PoE OUT start work? When the PoE OUT output is started or shorted, it is activated sequentially to reduce the risk of overload.
• Can power be turned off on selected ports? Yes, it is possible to turn off the power on individual PoE OUT ports.
• What are the power restrictions? The total power consumption of connected devices must not exceed the power budget of the PoE switch; for 802.3af it is approx. 13W, for 802.3at approx. 25W, for PoE Passive maximum 40W.
• Is the device ready to use out of the box? Yes, but requires connection to a power PoE switch or PoE Passive power supply.

Gallery:

Specification:

• Number of LAN ports: 4 x RJ45 10/100Mbps (MDI-MDIX auto, auto-negotiation)
• PoE IN port: 1 x PoE (802.3at, 802.3af or Passive) – power supply
• PoE ports OUT: 3 x PoE (802.3at, 802.3af or Passive) – power supply for receivers
• Maximum total PoE power OUT: 40W (total on all PoE OUT ports)
• Sequential PoE start OUT: enable PoE outputs individually after startup or short circuit
• Power off: on selected PoE OUT ports
• Signal amplification and separation: LAN and PoE extender/repeater function
• Cascade power supply: possibility of connecting further PoE devices
• Own power consumption: below 0,5W
• Working signal: optical (LED) – power supply and data transmission status
• Housing: heat shrink (HS – Heat Shrink)
• Dimensions: width 93 mm (reduced from 97 mm)
• Working temperature: wide range (exact values not in the description)
• Installation: small size, wide mounting options

Specifications