Nekeliamas stalinio tipo PoE komutatorius, 2x/4x 100 Mb/s, tinka 10''/19'' rack

Trumpai apie prekę

Prekė: Nekeliamas stalinio tipo PoE komutatorius, 2x/4x 100 Mb/s, tinka 10''/19'' rack. Kategorija: Jungikliai ir koncentratoriai.

• Gamintojas: Lanberg
• Modelis: 385911869

SWITCH RACK 10' 19' 6x 100MB 4x POE 60W Lanberg

Switch 4X100MB POE+/2x 100MB RSFE-4P-2FE-60

For him, power is not a problem: a simple and functional Lanberg POE+ switch; The PoE+ switch is an indispensable active device in any network structure that uses power transmission via structured cabling. In addition to the primary function of the switch, i.e. handling the traffic of Ethernet frames between ports, it also provides power to each device in the PoE/PoE+ 802.3af and at standards. This allows for a total power delivery of up to 60 W to devices. And all this together with simultaneous data transmission to them. This saves resources, space and time that would otherwise be spent on installing a separate electrical and network installation. This is particularly important if the network is distributed and its end devices do not have access to a power source, especially when they are mounted outdoors. A solution without compromise - real POE budget: 60 w; The switch is equipped with a total of 6 ports, including 4 PoE+ ports and 2 Uplink ports. A well-thought-out design and care for the quality of components provides the user with up to 60 W of total real power for end devices, which means that it is possible to connect simultaneously: • 4 devices in the IEEE 802.3af standard (max. 15 W per port) or; • 2 IEEE 802.3at devices (max. 30 W per port); : The remaining 2 ports (Uplink) are dedicated to exchanging data traffic between the 4 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful because it allows the user to simultaneously download recordings from cameras to the recorder and share them further, e.g. on a local network or on the Internet. There are several possibilities: the one that exceeds the budget will be disconnected, or a random port, or the newest connected one. In the latter case, what will be their order after a power outage and its restoration when all of them are connected to the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches, which, through the simplicity of the operating principle, eliminates any doubts as to the mechanics of port operation. When the PoE budget is exceeded (e.g. If the device is connected to port 1 (e.g., through a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest number until the sum of the loads does not exceed the available budget; while maintaining the operation of the remaining ports intact. Those that are disconnected will, in effect, be alternately turned off and on. The function is primarily intended for demanding applications that emphasize security and continuity of operation, where some devices must operate continuously regardless of the situation. In such cases, Lanberg switches will allow the user to protect critical devices by connecting them to the lowest port numbering.

Extend mode up to 250 meters; Standard switches, in accordance with the standard, ensure the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes it turns out that due to the extensive backbone network and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networks. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function enabling data transmission (max. 10 Mb/s) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the housing to provide longer distance operation for ports 1~4. The solution was introduced with monitoring and IP systems as well as access control in mind, especially if the end devices are located outdoors without the possibility of installing additional network distribution points. 4 kV surge protection; The switch itself and the devices connected to it are repeatedly exposed to various hazards, including current discharges that can flow through both the power and network cables. With the safety of devices and their users in mind, Lanberg has equipped the switch with an integrated lightning protection system that guarantees 4 kV protection for all ports, effectively reducing their damage due to a sudden voltage increase. Under standard conditions, network operation will continue without disruption, the switch will continue to operate without any interruptions, and the user will gain the security of both the device and the infrastructure. Mounting kit included - ears up to 10" 19"; The RS switch series is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of mounting and supplied accessories where possible. Most of the small switches available on the market are supplied for free-standing or 19-inch mounting. Some manufacturers forget about users who want to use their products in smaller home or SOHO installations. Especially where switches have a small number of ports and, consequently, a small housing. Therefore, they can be installed not only in cabinets with the mentioned size 19, but also in smaller ones, such as e.g. 10. Lanberg has introduced a set of accessories for versatile installation of its switches. In the RSFE-4P-2FE-60, separate mounting ears for 10 and 19 cabinets and a set of mounting screws (except M6) are supplied. This enables wider use and greater freedom of installation of RS series switches.

Specifications