Kryžminis lazerinis nivelyras 16 linijų 4D 360 su stovu ir dėklu

Trumpai apie prekę

Prekė: Kryžminis lazerinis nivelyras 16 linijų 4D 360 su stovu ir dėklu. Kategorija: Lazeriniai nivelyrai.

• Gamintojas: Abrams
• Modelis: KRZYŻOWA 16 LINII LASER 4D 360 STATYW WALIZKA
• Ilgis: 13 cm
• Svoris: 1 kg

✅ Do you expect perfection? ±0,2 mm/m is guaranteed repeatability and installation once, and the effect for years.

• Accuracy ± 0,2 mm

• 4 independent sensors generating 16 lines/ 4D

• 3 Modes : OUT, flashing, manual

• Beam brightness adjustment

• Self-leveling and tilt alarm

• Working range 60m

• Many mounting options

• Perfect line visibility during the day

• Solid Tripod

• 2 3600 MaH batteries with type-c port

• control remote control/buttons

• factory calibrated

• a set that offers literally everything!

✅ ACCURACY 0.2 MM/M? — PRECISION THAT LEAVES NO ROOM FOR GUESS.

0.2 mm per 1 meter is a value that looks inconspicuous on paper - but in practice it makes a huge difference .

This deviation is smaller than the thickness of a 1 PLN coin spread over 1 meter . In other words: the line is so even that the wall, tiles or construction "hold the geometry" from beginning to end.

The effect in practice:

• the tiles fit together perfectly without any "steps",
• the cabinets hang evenly, without wedging or shimming,
• profiles, strips and structures do not "split" along their length.

✅ "SOMEHOW IT WILL BE"? IT'S NOT HERE! SELF-LEVELING ELIMINATES HUMAN ERROR FROM YOUR CONSTRUCTION SITE.

You know that feeling when you apply a traditional level, the bubble is “almost” in the middle, so you find it simple? This is the trap of “human error.” On a short piece you do not see it, but when you get with tiles to the corner of the bathroom, suddenly it turns out that the last strip has a 2 cm difference.

• Effect?

The whole tear wall, wasted material and your nerves.

• Swing mechanism with magnetic damping: Instead of setting the device “on the feel”, you simply turn it on. The inner pendulum under the influence of gravity immediately determines the ideal vertical and level.

• Intelligent Self-Leveling with Alarm (4 mm): The pendulum mechanism uses gravity to automatically correct ground unevenness up to 4 mm in 3 seconds. If the deviation is greater, the device will immediately warn you with loud beeping.

• Two-step verification We have placed a traditional level (libella) on the housing. Why? So you can confirm the reliability of the machine in a second. This is your “professional instinct” enclosed in the tool – you are 200% sure that the equipment has not “hanged” on the lock and gives a real dimension

✅ INSTALLATION IN HARSH LIGHT? PERFECTLY VISIBLE LINE — ZERO GUESSES, NO CORRECTIONS.

Ordinary lasers lose contrast with bright light and reflections — the line fades, blurs or “flashes”. This forces you to turn a blind eye, step back and guess.

• Our solution eliminates this problem: constant, adjustable brightness combined with reflective optics gives a clear line regardless of light. It’s a real difference — you see what you should see right away.

When the line is hardly visible, the risk of inaccurate work increases – from a crooked hole through a poorly embedded profile to an unevenly located plate. The result is corrections, waste of material and wasted time.

✅ 60 M RANGE? IT’S LIKE A 20-STORY BUILDING IN THE LASER’S SIGHT — YOU DON’T MULTIPLY MEASUREMENTS AND YOU DON’T MULTIPLY ERRORS.

The 60 m range is one continuous line covering the entire working surface

• from the foundation to the roof or from one end of the square to the other. You set the laser once and have one fixed reference for the entire order.

When you have to move the laser every few meters, each setting change introduces a new reference — and a new risk of discrepancies.

• A small error at the first setting multiplies at the next setting, and at the third it becomes visible as a crooked hole, a shifted profile or uneven grout. It’s not a theory — it’s everyday life on a construction site where “millimeters” count towards an expensive fix.

✅ LACK OF ELECTRICITY? NO PROBLEM — 2 BATTERIES WITH TYPE-C INPUT: UNIVERSAL CABLE, CHARGING IN THE CAR OR POWERBANK.

A set of two batteries plus a USB-C input means a simple rule:

• you load one, the other works. In turn, USB-C is a universal cable – the same one you have for your phone, and thanks to this you can recharge the battery not only in the charging station: in the car, from a powerbank or from any USB-C source.

Battery replacement is a quick “swap & go” — no stations, no additional cables.

• Thanks to the possibility of recharging from the powerbank, you work calmly even on construction sites where the electrical system does not exist or is not active – the lack of electricity ceases to be a problem, and you do not lose the rhythm of work.

• Ease of use — one USB-C cable instead of several chargers = order in the toolbox.

• Full mobility — you charge from your car or powerbank, so the lack of an active network is no longer a problem.

✅ PRECISION IN SPACE? 16 LINES / 4D AND 4 INDEPENDENT SENSORS ARE LIKE HAVING FOUR LEVELS IN ONE TOOL – FULL VERTICAL AND LEVEL CONTROL.

Four independent sensors simultaneously form 16 4D lines — a ready-made physical reference grid in 4 planes around the object.

Instead of putting the measurement sections together in memory, you work on a ready-made, physical reference grid — a simple equation: more independent reference points = fewer errors.

• Full space control — you can see risers and levels from all sides at the same time, so you don’t guess when assembling.

• No accumulation of errors — one grid instead of several settings = zero summing deviations.

• Certainty in large projects — you mount facades, structures and large-size boards with the idea that the elements will fit immediately.

✅ ADJUSTABLE TRIPOD? IT IS A UNIVERSALITY THAT ALLOWS YOU TO WORK ON YOUR OWN TERMS.

The 40 to 140 cm adjustment allows you to set the station for any task from working on slats to ceiling installations.

• On each leg there is a clear measure with graduation, thanks to which in several seconds you can set all three legs at the same value and get a perfectly even, stable base.
• Solid position locks and non-slip feet close the whole – the tripod stands securely, without vibrations.

Do you want to work faster, more comfortably and more precisely – even on uneven terrain?

• Choose an adjustable tripod 40 to 140 cm with measuring cups on the legs: set one value, adjust the others and work confidently. Match. Lock and create your way.

✅ TECHNICAL DATA:

• Light source: laser 532 nm (green)
• Working modes: 360° x 2(8 lines) 360° x 3 (12 lines), 360° x 4 (16 lines)
• Working range: up to 60 meters
• Accuracy: 0,2 mm
• Self-leveling range: +/- 4°

• Power Supply: rechargeable (2x battery included)
• Working time on one battery: up to 5 hours
• Charging: network
• Working temperature: -20°C to 50°C
• Water resistance: IP54
• Device dimensions: 13x 13 x 13 CM

CROSS LASER LEVEL 16 LINES LASER 4D 360 TRIPOD CASE SET PRO

Specifications