Keltuvas RAVAGLIOLI RAV 1110 LR

Trumpai apie prekę

Prekė: Keltuvas RAVAGLIOLI RAV 1110 LR. Kategorija: Keltuvai stulpams.

• Gamintojas: Ravaglioli
• Modelis: RAV1110LR

Stamp lift, electro-hydraulic RAVAGLIOLI – RAV1110LR designed for passenger vehicles, SUVs, off-road vehicles and commercial vehicles weighing up to 3500 kg.

Lift with increased cylinder spacing.

Features of the lift:

• electro-hydraulic lift designed for installation in the floor,
• excellent synchronization between cylinders, regardless of load distribution,
• mechanical locking protection with pneumatic release, ensure maximum safety during lifting and standing position.
• equipped with a safety valve to prevent overloading or in case of damage to the lifting cylinder,
• all hydraulic, mechanical and electrical parts manufactured in accordance with European ESS safety standards.
• lift with 4 lifting arms with a low profile parallel to the floor
• minimum take-up height = 98 mm
• free access to the vehicle from all sides
• lift embedded in a waterproof cassette (hot galvanized steel frame in a hard plastic housing)
• There is a double joint crossbar at the bottom of the cassette frame to eliminate vibration
• Low Voltage Lift Control (24V)

OPTIONAL: separate control with external hydraulic pump in waterproof housing – ideal for wet workshop zones

Requirements for the foundation of the RAVAGLIOLI stamp lift:

The lift should be installed on flat ground, able to handle loads (according to Fig. A)

Minimum substrate requirements:

a) concrete class C25/30 or higher

b) minimum thickness of concrete counting other acquisitions or tiles 150 mm.

(c) upper and lower reinforcement made of welded mesh Ø4 / 150×150 mm or similar, with meshes of not less than 250 mm.

(d) the load capacity of the substrate not less than 1,3 kg/cm2 shall be ensured on a minimum area of 4,50×2,00 m in which there is no expansion or cutting. Continuity should be maintained in the upper reinforcement grid.

General warnings:

• minimum load capacity of the ground at the bottom of the trench should not be less than 0.5 kg/cm2
• “floor level” means the final floor including tiles or other finishing (Fig. foundations).
• there is no danger caused by other machines working in this area,
• the area where the device will be installed is not exposed to explosive, corrosive and/or toxic materials
• The distance of the lift from the walls and other devices must be at least 70 cm.
• the place of installation should be selected so that the operator has visibility to the device and the area of work of the lift

• Leverage: 3500 kg
• Lifting height: 2019 mm
• Total width: 3064 mm
• Transition width: 2450 mm
• Distance between cylinders: 2340 mm
• Minimum vehicle clearance: 90 mm
• Range of short arms: 518 – 1078 mm
• Long arm range: 518 – 1078 mm
• Cassette dimensions: 2500 x 2863 x 603 mm
• Engine power: 2,6 kW
• Power supply: 380- 415 V 3ph 50 Hz
• Invented weight: 1390 kg

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	Ravaglioli
Parametry	Manufacturer code	RAV1110LR
Parametry	EAN (GTIN)	4057612815399
Parametry	Number of columns	2
Parametry	Drive	electrohydraulic
Parametry	Column connection	bottom
Parametry	Overall width	3064 mm
Parametry	Engine power	2.6 kW
Parametry	Lifting capacity	3200 kg
Parametry	Maximum lifting height	2019 mm