Hidraulinis žemas keltuvas FROG, 3 t, 85–430 mm

Trumpai apie prekę

Prekė: Hidraulinis žemas keltuvas FROG, 3 t, 85–430 mm. Kategorija: Bėgių keltuvai („Frogs“).

• Gamintojas: BESTEN
• Modelis: BE0002924 PODNOŚNIK HYDRAULICZNY ŻABA 3T

LOW PROFILE 85 – 430 mm ► DOUBLE PUMP ► STEEL CONSTRUCTION ► 2x RUBBER OVERLAY ► QUICK LIFT

Prepare your garage for action. BESTEN BE0002924 combines a low profile with a double hydraulic pump – it is easier to set it under the car and lift the vehicle efficiently, without unnecessary pumping.

• 85-430 mm - easy access to low auto - the initial height of only 85 mm makes it easy to slide the lift under the car with low suspension.
• Two-piston / Quick-Lift - less pumping, more efficient operation - double pump accelerates lifting, limiting the number of movements with the handle.
• Leverage up to 3000 kg and lifting up to 430 mm — parameters that allow you to prepare a properly selected car for wheel replacement or further service work.
• Protection at the support point — The rubber overlay limits the direct contact of the metal saddle with the vehicle, helping to protect the lifting point from scratches.
• Wide wheels + swivel bearing – easy to maneuver under the car.
• Convenience at each wheel – wide front wheels make it easy to roll the lift, and the screw recess allows you to have them on hand.
• Safety valve + easy venting – full control and simple maintenance.

Polish BESTEN service – quick door-to-door support

⚙ TECHNICAL SPECIFICATION

• Brand: BESTEN
• Model: BE0002924
• Type: hydraulic lift, low profile "frog"
• Maximum lifting capacity: 3000 kg
• Minimum lifting height: 85 mm
• Maximum lifting height: 430 mm
• Lifting mechanism: double hydraulic pump
• Material of construction: steel
• Front wheels: wide
• Saddle cover: rubber
• Handle: foldable, with soft protective cover
• Additional equipment: screw recess

⚡ DOUBLE PUMP – LESS PUMPING WITH EVERY WHEEL CHANGE

Do not waste time on long lifting the lift to the support point. Double hydraulic pump allows you to quickly lift the saddle to the chassis, limiting the number of movements of the handle.

It’s a convenience you’ll appreciate with more wheels — especially when a seasonal replacement is waiting for more than one car.

✅ ONLY 85 MM – EASIER ACCESS TO LOW CAR

Too high a lift may not fit under the car. BESTEN BE0002924 starts lifting from 85 mm, which facilitates access to support points in cars with low suspension.

The range of 85 to 430 mm allows you to start lifting low and lift the car to the height needed to replace the wheel.

Before buying, check the ground clearance at the lifting point of your car – thanks to this you will choose equipment that will actually fit under it.

✅ STEEL CONSTRUCTION – A SOLID BASE FOR YOUR GARAGE

With seasonal wheel changes, you need equipment that you can reach for again and again. The steel frame of the lift forms a sturdy base for the mechanism with a lifting capacity of up to 3000 kg.

Wide front wheels make it easy to roll the lift and position it at subsequent lifting points – you don’t have to move the entire unit every time.

It is a practical combination of solid construction and convenient operation, useful both with one car and when replacing wheels in family cars.

✅ RUBBER OVERLAY – TAKE CARE OF YOUR CAR WHEN LIFTING

The rubber overlay separates the metal saddle from the car's support point, helping to protect its surface from scratches.

The body also helps to take care of the soft handle cover – it reduces the risk of scratching the paint in case of accidental contact when maneuvering the lift.

Two practical details that make it easier to take care of your car while working.

The BESTEN lift allows you to safely perform most of the work on the car – both in the home garage and in the professional workshop:

• Oil change – quick access to the oil pan and filter without additional lifts or mare.
• Replacement of wheels and tyres – stable lift of the car with seasonal tire replacement or with a punctured tire.
• Exhaust system repair – safely lift the vehicle to get to the silencer, catalytic converter or pipes.
• Repair of chassis covers – convenient access to plastic and metal elements protecting the bottom of the car.
• Checking and repairing the braking system – replacing discs, pads or brake lines in fully controlled conditions.
• Suspension repair – access to control arms, shock absorbers and springs for replacement or regeneration.
• Service of the suspension and steering system – convenient operation with bars, steering tips and ball joints.

Thanks to its high lifting capacity and robust construction, the lift will work not only for passenger cars, but also for buses, SUVs and light commercial vehicles.

⭐ ABOUT THE BRAND AND SERVICE BESTEN

BESTEN is a polish brand of tools and power tools, which focuses on quality, reliability and support after purchase. By choosing our tools, you gain not only the product, but also the safety of service and service in Poland.

✔ Official store – you buy directly from the distributor, without intermediaries.

✔ Door-to-door service – we will pick up the equipment by courier, repair and send it back to you without leaving your home.

✔ Spare parts available immediately – you don’t have to wait weeks.

✔ Technical support and advice – you can always count on the help of our experts.

BESTEN BE0002880 – a lift that ensures strength and reliability wherever you are.

Unlike many cheaper models:

❌ we do not overestimate the parameters – real 3 t lifting capacity,

❌ we do not use thin profiles – 5 mm sheet metal and ~22 kg weight is a guarantee of durability,

❌ we do not save on details – rubber washer, wide wheels and two-piston actuator are standard, not an option.

With BESTEN you have a lift for years – stable, safe and proven in practice.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Product weight with unit packaging	22 kg
Parametry	Brand	BESTEN
Parametry	Manufacturer code	BE0002924 PODNOŚNIK HYDRAULICZNY ŻABA 3T
Parametry	EAN (GTIN)	5906124911602
Parametry	Lifting capacity	3000 kg
Parametry	Minimum lifting height	85 mm
Parametry	Maximum lifting height	430 mm